What to do after the use of reflow

Similar Questions

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• After the use of Seagate BACK, I've now lost 48 GB hard drive

  Hi after the use of seagate for BACK, I lost 48 GB of my hard disk, seagate response did not work?

  I found it earlier.

  You may try it and see what you told the utility:

  157734, http://www.PCWorld.com/downloads/file/FID, 4/description.html

• My right click menu is missing after the use of security of Kaspersky application control settings.

  Right click menu disabled

  My right click menu is missing after the use of security of Kaspersky application control settings.

  My right click menu is missing after the use of security of Kaspersky application control settings.

  This tutorial will help?

  Context menu - enable or disable

  http://www.Vistax64.com/tutorials/140508-context-menu-enable-disable.html

  Option One is the easiest.

• where are my data after the use of Dell backup and recovery

  Three check marks displayed on a Dell backup and recovery, which, I suppose, finishing meant that my backup was successful (using Windows on a Dell Inspiron 8.1).  Where my data is sent to after the use of Dell backup and recovery?

  

  Click on the 02:22 mark of the video.

  www.YouTube.com/watch

• blocks of Lightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

  blocks of ightroom after the use of crops funktion. Export still works, but after you have selected the following image, lightroom must be inexplicable manually (no response from the program). environment: windows 7 adobe cc 2015

  Turning off graphics acceleration. Go to preferences-> Performance tab and uncheck the box there.

• After the use of helmet - no sound

  Everyone knows who after the use of the helmet, when it came out it is not through the speakers of Treo 680?

  I couldn't hear the phone ringing, incoming audio or ringtones playing. System sounds (beeps, etc.) seems to work. I have reinserted the helmet along with the helmet. I tried jiggling the plug and at the end of a few moments, has been able to recover the loudspeaker.

  There is a small switch inside the plug on your device, sometimes when a headphone is inserted and then picked up on this switch is not back to external sound more. The resolution is simply re - insert the plug and remove a few times to get the changeover to folding and the sound should return.

  Message relates to: Centro (Sprint)

• Layer merged after the use of convert to RGB to CMYK profile

  Hi all

  I'm converting a drawing printed in photoshop cs5 from RGB to CMYK. My layer merged after the use of convert to RGB to CMYK profile.

  After this, I save the file and close it, and I didn't have a backup of this file.

  Now please suggest how can I recover my all layers

  I don't need that my layers back...  Please help me

  Finally you all say there is no way back...

  because I checked flattened when I convert.

  No Way Back, I'll take care of it in the future

  Thank you all

• How to find edited a photo folder after the use of Photos

  Hello, I'm new to using a Mac.  I uploaded the photos to Photos and then made changes to multiple images, cropping etc...  Now I can't find the image file on the hard drive after the change of the use of the Photos app, I find only the original file.  I went to the finder, then the photo file and I find the file "Library.photoslibrary photos" so I right click and select "Show package content" then I click on the master file and look for the file in a folder.  However, the file I find does not changes that I made, it is only the original file.  I'm not sure what I am doing wrong?  Thank you

  What you're doing wrong is fiddling in the Photo library package, this will lead to tears. What exactly you are trying to achieve by finding the original.

• NB305-N410 - what application/driver allows the use of F # to toggle keys?

  NB305-N410wh - what application or driver allows you to press the function with a key of "f #" to toggle different features listed on the F keys #? (For example, turn on/off wireless with FN + F8?)

  I have reinstalled my system bottom upward, created the flash drive which contains all the drivers toshiba and apps, but can't seem to find the one that controls this feature.

  Hi zathrak,

  What operating system you are using?

  If you are using Windows 7, you need to install the package of added value and utility to Support Flash Cards. The two you can download on the Toshiba site.

  I had a similar problem, and after installing the FN keys worked again! :)

• Hard drive does not start after the use of the recovery on USB Manager

  The hard drive on HP G62t - 350 CTO Notebook to my newphew failed. I could create a USB recovery in the Recovery Manager. I installed a new 120 GB SSD. The original hard drive was bigger, do not remember now but 250 or 500 GB. I know that the recover the system after the hard is replaced (Windows 7) said "to avoid problems, install a hard drive as big or bigger than the replaced hard disk", but that's a question for later.

  Computer started fine of USB (in fact, is set to boot from USB if present by default). Recovery Manager starts. I choose minimum installation. He goes through the process of partitioning the SSD and copying files. Said so to remove the external media and restart, the computer will restart several times during the process, blah, blah, blah. I get out of USB and restarted, but after POST I get "no bootable media present.

  If I try to reboot, leaving the USB in, it starts in USB and that we are at the beginning. I am able to confirm with a rescue disk, the SSD has an NTFS partition that had Windows files copied to it and a large amount of unallocated space. (Something like 60% / 40%).

  So:

  1. How make bootable hard drive for, and if it was bootable, recovery processes complete?
  2. What is happening with the partitions? He creates the partition recovery first, and then after the start, the recovery partition installs the operating system? If so, I might have to give up this process because since I'm moving to smaller storage, I don't want to devote half of the drive to a recovery partition.
  3. Official recovery media help? A technician told me that he would do so, but couldn't explain to my satisfaction why the USB I created with Recovery Manager does not work, so I'm suspicious of the assertion that the media created by HP as opposed to media created by me using the own HP software would be better, and since the computer is under warranty I don't want to spend $30 + to find out.

  Most of the people who have installed an SSD that was smaller than the reader of the factory were unable to use any medium recovery HP with the SSD.

  As an alternative, if you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 family, by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Please note that this facility is not all customizations of HP or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the pilots of the HP G62t - 350 CTO Notebook PC Drivers page.

  Windows 7 SP1 can be found HERE and HERE.

  Direct link to Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash drive from windows. ISO

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Problem of scanning even after the use of HP print & scan doctor

  Hello

  I have printer HP Deskjet 2050 J510 which gives me an error message "scanner communication cannot be established. I had visited the HP support portal & downloaded HP print & scan doctor. After you run this tool, it is said that it cannot solve the problem. It detects the first two steps of pilot (or can be) Manager & pilot agreed. But in the third stage it gets stuck to the top (win scanning can be, even after the restaring the computer). I use 32-bit windows.

  It seems that HP can't valer'evne fix bugs in its own products. It's pathetic.

  A real quick help will be appreciated...

  Hi alb7039,

  Follow the steps below to update the software to the latest version.

  First step: clear temp directory

  1. tap folder in the race or search programs and files of field

  2 Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).

  3. proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635399&sw_lang=

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know what you find?

• The desktop icons do not respond after the use of IE

  Hello

  Anyone got a solution for this? When the computer is turned on I can use the icons on the desktop, no problem. However, after I used Internet Explorer from the desktop icons don't respond well the pograms can be opened from the start menu. As the recent problem I tried uninstalling some updates recently installed, without solving the problem. Using Windows Vista and IE9

  After that I used Internet Explorer from the desktop icons do not respond

  Does that mean exactly?   For example, what do you see?   For the best answer to this question, you could use ProcMon and know what modules are involved when you do what these are.   ;  )

  However, without using ProcMon you can check with the Manager task or resource or ProcExp monitor if there is always a hidden background iexplore.exe processes running or anything related to IE which started as a result of your using IE.   If so then try to kill these processes.   Etc.

  Related to this, you could also consider what you used IE before your symptoms occurred.   This means that would understand that make your "desktop icons" and change it to something more neutral.   For example, if you had clicked on was a shortcut Internet (aka the .url file) that requires a network connection, change for people who only runs locally, such as about: blank.   So if you could close the window that has opened and always use the shortcut you would have refined your description of symptom to involve the network connections.

  Related to that, would be your security package, for example, some are trying to act as a hidden proxy to "analyze" the HTTP traffic.   Then the problem would not be IE but the hidden proxy.  Etc.

  You can't wait for a "fix" until you have a fully understood symptom.   More details and diagnosis is necessary IMO.

  ---

• Can't get into BIOS after the use of "Quick start" mode

  Hello

  I do things
  1 - Enter my BIOS
  "' Quick start of start 2-change of speed to.
  Then I restart my knees and Toshiba logo disappeared.

  I want to get into my BIOS again, but how
  I tried F2, F12 and del not question

  Please help me

  > I ve tried F2, F12 and del no question

  What cell phone do you have exactly?
  Have you tried to press ESC, then F1?
  If this isn't it!

  Notes; You must press the buttons immediately after the laptop has been powered!

• After the use of trojan killer mycaptures files did not restore completely mainly the icons in the task bar and the status bar/windows vista

  After run Trojan Killer to clean up my computer after infection the installation "captured files" did not restore my system properly, namely files connected to the bar of tasks IE icons missing also no staus bar

  Hello

  Method 1:

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
   
  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: Run SFC scan.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run system restore by keeping the computer in the boot.
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting steps, follow step 7 link to return the computer to a Normal startup mode