What to wear to the front using a 3 g Modem?

Hello I am currently using modem Huawei Mobile connect - 3G to connect to the internet

someone knows how to portforward using this?

It's starhub if you must know.

Apparently, when I type ipconfig/gateway as 0.0.0.0, it shows by default

Thank you.

Hello I am currently using modem Huawei Mobile connect - 3G to connect to the internet

someone knows how to portforward using this?

It's starhub if you must know.

Apparently, when I type ipconfig/gateway as 0.0.0.0, it shows by default

Thank you.

Consult the instructions/help files for the modem. Or, visit the website of Huawei for information/kb articles or ask their support desk.

Tags: Windows

Similar Questions

  • Should I wear to the front through a VPN

    I currently have a Cisco 1905 as my hub router, running v15.1 (4) M4. (192.168.1.0/24)

    This router has a static public IP address on interface GI0/0 and the internal address is enabled GI0/1 and we use NAT for Internet access.

    I have an ASA5505 (v8 (4)) Branch (192.168.12.0/24) connection to the router with EZVPN and the VPN is setup and works as it should.

    I can access the branch out of the hub and vice versa.

    I have a security camera in the branch that I can access through the VPN without problem.

    The problem occurs when I try to access the camera from the internet using port forwarding.

    We have several camera in the Office of hub that we access using via the following command port forwarding

    IP nat inside source static tcp 192.168.1.40 80 40001-stretch SDM_RMAP_1 route map

    It works 100%

    I tried to access the camera in the Office using the command

    IP nat inside source static tcp 192.168.12.40 80 41001-stretch SDM_RMAP_1 route map

    but I can't get through.

    I can see the NAT translation in the branch for the port 41001, but I'm not through.

    Is this possible? should I wear to the front in a VPN tunnel?

    The problems is that the branch office is an Office suite and we rent space. We are not provided a public ip address and I have no control over the router providing an address in the ASA5505.

    Any help would be appreciated thanks

    If you have crypto-cards running and you prefer split tunneling, then I suggest a completely different way to resolve that:

    You can install a small linux box (or Win2012R2 will also do the job) in the main exercise (better would an own DMZ for that) and set up as an agent reverse. This system takes requests and passes them to the cameras.

  • I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

    I have Dell ispron B130 running windows xp, how do I print what is displayed on the screen using the PRNT SCRN key?

    The 'Print screen' button is misnamed.  In fact, what happens when you press it, it is that an image of the screen is copied to the Clipboard.  You must then open an application that can work with images (paint works) and paste in the opened window (or right-click > paste or edit > paste).  Then you can use the regular print of this application (for example, the file > print).

    You can also download free IrfanView.  It is a very handy utility.  It allows you to open and view a wide variety of image file formats and also has the capability of the bulk renaming of files and - for your current number - capture screen images and prints them out.

  • What should I wear to the front with ATT and Airport Extreme?

    I have AT & T Uverse with an Airport Extreme.

    EI is implemented as a bridge, because it wouldn't work otherwise.

    I went into the game/NAT on the router/modem ATT layout and tried to activate some ports to forward.  Then I check the port and find that it is always closed.

    Someone here would be able to offer assistance with problems?

    I do this to try to send large files to a friend VIA files torrent based, although it does not seem to allow me to seed.

    Before ATT I got time warner and my own modem and router combo, and it works wonderfully in this configuration, so I can only the assertion that the issue is somewhere in the new place from the material.

    Now, if I try to download a standard torrent, I have no problem, but try to make my own with the trackers who have worked before, there is no dice.

    Thanks in advance for any help.

    ATT system is the NVG599 of ARRIS

  • What are some of the most useful to download free stuff

    just walk around do not want my computer to stop viris I have avg?

    just walk around do not want my computer to stop viris I have avg?

    What I consider useful and that you consider useful are very likely two very different things. You will need to tell us more about what you are looking for.

    In addition, in my opinion, AVG, even if it was a good program, is more. If I were in your shoes I throw and get a better antivirus program.

    For an anti-virus program, I recommend eSet NOD32, if you are willing to pay for it. If you want a free anti-virus, I recommend one (do not run more than one) of the following three:
     
    Avira AntiVir
    Avast
    Microsoft Security Essentials
     
    You also need anti-spyware software (even if you run a program like Microsoft Security Essentials, with anti-spyware feature integrated into it). I recommend that you download and install MalwareBytes AntiMalware (freeware)

  • Display several values on the front using the table

    For example, if I enter "10" for number of datapoints, I want to see 10 hexadecimal and binary all values in a column. At present, only 1 value appears and erasing all of the previous values

    Thank you!

    You do not use a shift register to store the values in the table between the fo the loop iterations For.

    It is a fundamental concept of LabVIEW.

    I recommend you watch the LabVIEW tutorials online
    LabVIEW Introduction course - 3 hours
    LabVIEW Introduction course - 6 hours

  • What is to purge the log used for?

    Why exactly we use serve newspapers in ODI? Why we use the Purge journal?

    The PurgeLog tool allows you to purge logs session ODI interested is no longer required. Essentially, it allows you to perform the action of purge, you can do it manually through the operator. If you have a lot of ODI processes that run constantly on a daily basis, your session logs will quickly accumulate consuming an ever-increasing amount of space in the repository database, you will need to periodically purge session logs.

  • What is the menu item "Bring everything to the front ', and how to use it?

    What is the menu item "Bring everything to the front ', and how to use it?

    It's a selection in the window menu and means to bring all open windows of this application at the front and push all the windows open for other applications behind. This makes access to the easiest application windows. However, if you don't have that one window open in an application, then the menuitem does nothing.

  • HP EliteDesk 800 G2 Small Form: The front panel audio connector - this only made type to use for headphones and microphone

    Hello

    I am trying to determine what type of audio 3.5 mm plug to put into the connector on the front panel for the use of a headset to make video communications.

    could be - sleeve, ring and end cap (mono audio and microphone)

    or

    could be - sleeve, ring, ring and tip (stereo sound and microphone)

    Having read through the manuals and nothing is said on the type to use.

    Hello world

    Just plugged the connector 4 poles on my headset combination for my mobile phone (cellular) and the box of pop - up asked me to select headset or microphone - no selection for both.

    Looks like the right sleeve is for headphones only, and the left one is for headphones or micro - selectable by the user and not the two on a single sheet.

    Everything explained by the practice - but not the paperwork in the manuals.

    #5 for microphone or headset - menu popup is displayed after you insert a 3.5 mm plug to select that one but not both at the same time.  (So I can't use my headset to phone)

    Thank you

    Son

  • Using the 'current default values do' as a control on the front panel

    Hello

    I'm building a VI that uses a lot of digital controls. I want to use "do current default values" as a control Boolean on the front panel for the user.

    Is it possible to implement when the program is running? What would be an alternative, if this was not possible?

    Thank you

    Mhaque


  • I just installed lihtroom CC and develop, the picture is blue. When I used the front then the image before is normal and blue again after.

    I just installed lihtroom CC and to develop the module, the picture is blue. When I used the front after, the before image is normal and the after looks always blue.

    I don't know what to do?

    See link below:

    https://forums.Adobe.com/thread/1823307

    6 Lightroom displays a blank blue screen with an X through it in the module development for all my photos

  • Since Google Inbox or Gmail on Mac OS x using command-click to open a link in a new tab incorrectly brings this new tab to the front.

    Same action on any other site works very well and opens a new page in a new tab without bringing it to the front. You are looking for if there is a setting that needs to be adjusted or if it's something weird with functioning Google Inbox and Gmail. Would love to get this sort. Thank you!

    I think the address of other preferences, named in a similar way, most of the other situations:

    • browser.tabs.loadInBackground = > when you open a regular link in a new tab using Ctrl + click (or right click > open in a new tab)

      • default = true, do not have the new active tab
      • In the page Options dialog box, this is controlled by him "when I open a link in a new tab, switch to it immediately" setting.
    • Browser.Tabs.Load InBackground ofdiversion = > when divert you a new window generated by script in a new tab using Ctrl + click

      • default = false, activate the new tab
    • Browser.Tabs.LoadFavoritesInBackground = > when you load a bookmark in a new tab using Ctrl + click (or right click > open in a new tab)

      • default = false, activate the new tab
  • Left arrow work stopped, private browsing off the COAST, using HISTORY to return the works, any ideas what happened?

    Firefox 7.0.1. Windows7 Pro 64.
    Yesterday I was streaming audio of sky.fm and noticed that the back navigation toolbar arrow no longer and that he has failed since. FF restarting, rebooting the computer, same problem. Private browsing has never been used, i.e. the history file is fine. Using it is the only way to return to a previous page or the site. The visual indication only that the arrow was clicked, the firefox in the tool bar icon fades. All other indications are normal. The current url is displayed, and FF is sensitive to clicks on the link goes to the front - back just not.
    Any ideas? Thank you, John.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

    Another possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • What are the applications used in the IPAD pro video experience

    What are the applications used in the video to experience pro IPAD?

    Do not know exactly what video you want to say, but this site Web lists all the applications one by one.

    http://www.Apple.com/iPad-Pro/experience/

  • What PHOTO library is the library of real photos that I use now

    What PHOTO library is the library of real photos that I use now.

    I'm in 1.3 PHOTOS

    In the finder, located in the PICTURES folder there are 3 library of as I will show here.

    I'm confused because of the dates that are associated to these. When iPHOTO became PHOTOS is iPHOTO Library.migratedphotolibrary who became now the PHOTO (ORIGINAL) LIBRARY. PHOTO LIBRARY

    OR the PHOTOS IS LIBRARY.photoslibrary the current collection of photos.

    each has a different file size and date:

    If someone can explain to me I would give thanks, that is the library that I use now, 1.3 PHOTOS

    Thank you

    jojoguitar_mn_usa

    Could be one of them - you decide - person other than you, who controls - hold down the option key while launching Photos and the use of the select Library window to test each - quit Photos while you what to use as a default is defined as pictures opens always the last library used when you start so it is available

    One you use is shown in the photo ==> of general preferences to the right of the location of the library

    LN

Maybe you are looking for