What type of memory uses the Satellite L30-113

Similar Questions

• Disassembly of the specifications for the Satellite L30-113?

  Hello

  where can I find the complete specifications on how to disassemble toshiba satellite L30-113? !!

  Thank you.

  Hello

  Disassembly of the laptop is not easy and should be done only if you have a technical background.
  The risks are too high you might damage something on the map. You know, the motherboard is the most expensive part of the laptop.

  But don t worry buddy, I cleaned my laptop fans without removing anything.
  I used the hose of vacuum cleaner against the vents and it worked

• What memory uses the Satellite A50 112

  My wife has 'lost' the paperwork on this model and need to know the specifications, can anyone help?

  I think that should help you:

  Have a look here:
  [Memory for Toshiba Satellite A50 112 | http://www.orcalogic.co.uk/asp/prodtype.asp?prodtype=26424&ft=m&st=3]

  You must use the 200-pin PC2700 (333 Mhz) DDR SODIMM

• Problems upgrade memory on the Satellite L30-134

  I just bought 2 x 1 GB memory for my L30-134 PC4200 and installed that they work fine in the BIOS, see and read as they should do, but when windows starts up it will crash with the two modules are installed, don't ever get to the screen with the loading bar crossing and then I get the blue screen.

  I forgot to take note of the error code, I'm afraid... (Silly I know). If I remove one of the modules and module installation original 512 with just 1 the 1 GB ones that it works perfectly. BIOS has been updated to the latest version 3.10, and again, I get the same problem...
  because everything looks good go in the BIOS I think that its more likely to be a software problem (windows) any maybe some damage data in the registry or maybe a virus... anyone have any ideas?

  In addition, the laptop is actually my step son and he really wants to have the CPU improved Celeron 410 to one that is a little faster. When we look at first in this we was told that several processors are compatible (although not really worth the hassle of installation) they were cel m 450 2 GHz, dual core t2060 and t2080 pent, as well as the core duo t2250, so he bought the t2250 and it wouldn't surprise, or should I say it power on with no display and the stopcock and just epeated cycle. So didn't take is not a genius to establish it was not compat...

  I know the t2080 are used in of the L30 and 1.73 533 FSB with 1 MB L2 cache-65nm and do walk. The t2250 is identical apart from the L2 cache is 2 MB and deepening varies from c to MB depends on when you bought it... because oe it already has the CPU it will sell and use the money to purchase one that will work. If anyone has any info that could help to ensure that it doesn't end up going round in circles I would really appreciate it...

  Oh and just to make laugh you all he was member of staff line Toshiba tech that had told him that the CPU would not work and that the L30 managed to take 2 x 1 GB memory and not once mentioned that there may be problems with two updates...
  Issues such as neither soddin work... lmao

  Are you sure;?  :|

  On the website provided in your posts, I found this info:

  _Radeon Xpress 200M_
  Memory interface:
  -UMA mode operation requires no additional memory
  -* DDR and DDR2 Support *.
  -* DDR speed * up to the * 400 mhz *.
  -* Speed DDR2 * until the * 667 mhz *.

  _Radeon Xpress 200_
  Memory interface:
  -UMA mode operation requires no external graphics memory
  -+ Variants available with single or double channel system memory support.
  -* Support for DDR or DDR2 memory *.
  -* Memory DDR * speeds * DDR400 *.
  -* Memory DDR2 * speeds * DDR2-667 *.

  concerning

• Problems of memory on the Satellite L30-101

  I have a toshiba satellite l30-101 laptop and wanted to upgrade the RAM, so I bought 2 x 1 GB sticks to put in it.
  Now, I could not find all those at 533 mhz so I bought 2 667 mhz after a talk to a technical guy who said if I had 2 the same speed it will work very well.

  Only this isn't at all that I can put a stick and it works very well with the 533 mhz.
  The one I have in if I try to put the two sticks in it comes up with errors of memory and I get the bsod that restarts my computer and did not get my games or other programs.
  Is anyway to make sure I can have both new sticks in that I really need RAM and do not want to buy different ones.
  I mean if I can get another one we should probably work well work?

  Please help im crazy trying to solve this shit

  Hello

  I think that the speed of the memory has nothing to do with the BSOD!
  In my opinion the BSOD appears due to the failure of memory!

  In addition the L30-101 supports only the FSB 533 Mhz. In this case you will not be able to run the 667 Mhz modules of memory at full speed.
  The modules will run at 533 Mhz only!

  So in my opinion, you must replace the defective module with one that works very well!

  Best regards

• What graphics card and the amount of video memory uses the Satellite A80

  Hello.
  Answer please. I have Satellite PSAA8E-077017DU. What video card on this model? And use of the video card MB maximum how on this model.
  Thank you to.

  Hello

  I googled a little and you should know that the series of laptops have been delivered with a different hardware configuration.
  The number you placed said nothing to me and that's why it would be very interesting to know the additional name of mobile; Satellite A80 - xxx

  However, some of these units are Mobile Intel Express Chipset AlvisoGM up to 128 MB of memory sheared 915GM supported.

• Problem upgrade memory on the Satellite L30 - 11 d

  Hi all

  I'm trying to update the memory from 512 MB to 2 GB.

  I have used Crucial memory Tester and ordered memory: 2 X 1 GB DDR2 667 CL5
  I can use either chip in a memory slot, but not the two chips at the same time

  I've updated the BIOS

  Any ideas?

  Cheers, rofleuk

  Maybe you should use compatible DDR2 533 MHz modules. RAMs compatible for this models are 1 GB with PA3411U-1M1G part number.

• Satellite L30 - 113 (PSL33E) - can I get the CPU?

  Hello!

  Now, using a Satellite L30-113 (Celeron m 430, 2 GB 533 Mhz, ATi xpress 200M chipset). My question is if the Satellite L30-113 has a socket M? Can I use CPU with 667 fsb and ram with 533 speed? If a socket M I can upgrade cpu including core duo or core 2 duo CPU? How to identify a list with socket M CPU?

  How to install ATI Catalyst on Windows 7? I try with Mobility Modder.NET and did not work

  Hello

  You can identify the plug yourself if you install a hardware such as Everest or PC Wizard 2009 diagnostic tool. Both show all hardware information.
  Check this box!

  But upgrading CPU's official unsupported:
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  No one can say what s CPU will work or not, buddy. ;)

  Last but not least, you can download the ATI driver for your laptop on the Toshiba page directly:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Is it useful to upgrade the memory on the Satellite M70 - 394?

  Is it useful to upgrade the memory on the Satellite M70 - 394? Where the best place to buy it and what I should go for? How will this affect my laptop? It will void the warranty at all?

  Sorry for so many questions

  Hello

  First of all it s worth it to upgrade the memory for portable computers. The increases in performance and the operating system should work better and faster.
  Well, I checked a few websites, and it seems that it is possible to upgrade the memory on this laptop to max 2048 MB (2x1024Mo)

  As far as I know the laptop came with a 512 MB module. In this case, the second Bank is empty. The memory location is placed at the bottom of the unit. If you want to upgrade the memory to remove the slot cover down and carefully insert the module. I think you'll find instruction how to handle the upgrade memory in the user manual.

  In addition, you can order the compatible modules form the Toshiba service partner. In this case, you will be sure that you have taken in charge to 100% and compatible modules.

• Cannot change the size of the video memory in Satellite L30-113

  I have a Satellite l30-113 which has 1 GB memory and windows Vista.

  The size of memory that has been attributed to the vga is 319 MB.
  How can I decrease the video memory?

  Hello

  do you really mean 319MB? This machine only supports a maximum video memory 256 MB shared memory. So if you might have 32 MB (which is how I imagine rather memory assigned to your VGA) you can increase the video memory of this machine by changing the value of memory assigned in the bios of your machine.

  Do you know how to enter the bios?

  Welcome them

• Question about video memory on Satellite L30-113

  Hello

  I have a Satellite L30-113 and I managed to install a driver (I am learning how to in this forum, thx) for the video card, which allows me to change the size of the memory, what video card can be used. Configure the size of the (UMA) memory of 256 MB (including 128) properties, then in the properties of that memory for the graphics card is display 512?

  My question is that the size 512 memory is real? Video card really use this amount of memory or is unreal? If so is it better to go back to 128 (then in properties is 256), not to waste this memory for nothing.

  I know the les specifications specifications from the manufacturer, said 'max 256 memory hyper', but my question again: why in the properties I have the memory size: 512 MB?

  Thank you in advance, best regards.

  No, 512 MB is not true. The maximum size of video memory is 256 MB, but I do not know why your system shows 512 MB. If you set the video memory up to 256 MB performance will be no higher. Do not waste this memory to change anything back to 128 MB.

• Satellite L30 - 113 memory problem

  I have a Satellite L30-113 that does not have the right
  size of the memory.

  The system was shipped with 512 MB and 1 GB extra, I installed
  Stick, but for some reason any windows reports only 896 MB installed and graphics card
  use 128 MB. The BIOS also pointed out that only 896 MB of ram is installed.

  When I run the system information for windows it only detects 1 GB module
  Although if I remove a memory module and have either 512 MB or 1 GB installed
  It works very well.

  I also installed the latest version of the BIOS and does not seam to
  have had no effect.

  Also the two sticks of memory were tested in another laptop, so I know that both work.

  Are there problems with the mixture of sizes of memory in these laptops or to memory
  Poles should be assorted sizes?

  The operating system is Windows XP Pro

  * Excerpt from system information for windows
  The value of property *.
  * + Memory: + * summary
  + * Place: * + motherboard or motherboard
  * + Maximum capacity: + * 1024 MB
  + * Memory: * + Slots 2
  * + Error Correction +: * No.
  * + Physical name: + * matrix memory
  * + Operating system: + * memory
  * + The device index: + * J501
  + * Capacity: * + 1024 MB
  * + Memory + type: * DRAM
  * + Width of data: + * 64-bit
  * + Bank Label +: * channel B0
  * + Form factor: + * DIMM
  * + Total width: + * 64
  * + Type Detail: + * synchronous

  Thank you very much
  Matt Tyrrell

  I agree with Abe. I noticed a few comments about it in the forum, and it seems that the Satellite L30 should be upgraded with exactly the same modules.
  I mean that the modules must support the same speed (MHz), the same manufacturer and so on

  For me it s clear that other computers are able to manage these modules, but it seems as the can-do that L30!

• Problems with Benq DC C 700 digital camera on the Satellite L30 105

  Hello

  I have problems with my digital camera when I connect it to my laptop. Whenever I connect the camera to the laptop freezes and gives me the blue screen of death, in other words, the screen you get when a fatal error occurs, and then my laptop must be restarted. If this happens whenever I connect the two.

  I tried the bios update and install the latest orders, but nothing seemed to work. I contacted the support center in Benq and they told me to contact Toshiba as they are sure that the problem is not with the camera. So please someone, if you have any ideas or suggestions or solutions, I'll be happy to hear.

  Thank you!

  Hello

  First of all if you need Toshiba support, you will need to contact Toshiba authorized service partner in your country. This forum here is only a forum for users and you won't find anyone from Toshiba here.

  On the other hand;
  It seems that the Satellite L30-105 has been bundled with Vista. Using this operating system on the L30?
  I read on many problems with the 3rd devices, software, and Windows Vista.

  I put t know what said you, but eventually the software webcam is not 100% compatible with Vista.
  You should know that the BSOD appears if there is a serious hardware problem or software. I don t think that this problem was caused by a hardware issue and so there is only one possibility; software compatibility issues.

  In case you I would update the Vista of the State and I will ask manufacturing webcam if it s 100% compatible with Vista.

  Good luck

• Upgrading RAM on the Satellite L30 - 11 d

  My brother has a Satellite L30 - 11 d and he bought an extra 2 GB upgrade from 512 MB RAM.
  HE sent me an email - excerpt below, but does not have regular access to the Internet and so not the time of this post.

  My laptop has 512 MB of ram and Toshiba etc. told me that it could be upgraded to 2 GB. I got 2 x 1 GB cards installed.
  The problem is that if I remove the 512 MB card, the laptop does not see the Go cards at all, so I put the card 512 back in and it was OK, so I put a 1 GB card in and it worked OK, thinking it might be a loser card I have triedthe other cards plus the works of 512 and this.

  Also, if I put one of the GB cards on their own that work.
  According to Toshiba, the computer can be upgraded to 2 GB of RAM - so what I am doing wrong.

  Any ideas would be appreciated. »

  Hello

  I googled and found this page of specification of Satellite L30 - 11 d:
  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=UK&com.broadvis ion.session.new = Yes & PRODUCT_ID = 128130

  According to this page, the satellite L30 - 11 d can be upgraded to 2 GB of RAM (2 x 1 GB)
  You must use the RAM (533 MHz) DDR2 200pin modules.

  I think that the laptop doesn't recognize the 2 GB of RAM due to compatibility issues you should try the modules of RAM from another manufacturer. Maybe Kingston would be ok.

• Satellite L30-113 does not recognize the two modules DIMM RAM

  Hello

  I have a Toshiba laptop Satellite L30 113.
  It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
  It's DDR2 553 MHZ (PC4200.

  The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

  Did I miss something?
  They should be the same size as in the bad old days?
  What is going on?

  Thank you

  Adam

  > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
  Seems that the two RAM modules are not completely compatible...
  I've read several times on these issues and to be honest it s are not uncommon

  I advise you to buy two identical RAM modules ad then to try again

  I'm afraid there is no other solution for your problem of m.