What USB port output power offers Satellite M70-159
Hello!
I have a Satellite M70-159 and I am looking to buy a 2.5 external HARD drive ".
I would like to know if the power supplied by the USB port of my laptop is 500mA or 1000mA because the disc external HARD I want to buy needs 1000mA to work.
Eitherwise what I can do to provide external power to work HARD disk?
Thank you
Hello
To my knowledge the notebooks USB ports provides the standard power of 500 my.
Generally if an external USB HDD what needs more than 500mA so special, the power cable external power is supplied with version 2.5, HARD drive or HARD drive comes with a double USB cable.
I hear double cable USB cable that supports 2 USB Sockets. In this case, you can connect the HARD drive to two USB ports.
This picture date of arrival:
[Double USB cable | http://www.n-c.fr/webshopncrevendeurs/catalog/images/Double_Cable_USB.jpg]
Best regards
Tags: Toshiba
Similar Questions
-
Re: upgrade memory Satellite M70-159
I have the Satellite m70-159 with 512 RAM and you want to upgrade memory.
Is ddr2 sdram so-dimm PC5300, 667 Mhz kingston 1 G memory compatible with my laptop?
I know that this memory will run as PC4200, but I don't know where to buy PC4200.
Thank you.The Satellite M70 can be upgraded to 2 GB of RAM.
The Kingston RAM must be compatible with your laptop because Kingston's high-quality RAM and many users here upgraded with modules from Kingston.
And as you say that the RAM will work as long as PC4200, it is not a problem. -
Cannot install display driver for Vista on Satellite M70-159
I made an update to Windows Vista business and I downloaded the ATI Vista "8.31.100.3.2" display driver, but the driver failed to install.
The past even when I tried to update the windows driver by default through «properties--> update driver...» ».
No idea why this happen?
Hello
I have the Satellite M70-159 with ATI MOBILITY RADEON X 700. I know that it sounds stupid, but I didn't install any graphics driver. I installed Vista Ultimate to test and each hardware component is recognized correctly except sound and SD card reader. Audio driver found somewhere on the net, and SD card reader is not so important to me.
-
Linux Debian 3.0 on Satellite M70-159
Hello. I would like to install Debian Linux 3.0 (kernel 2.6) on my Satellite M70-159 (from DVD disc). After some operations Installer Linux said that my laptop has no HDD (Partitionable media). Anyone tried to install Debian on M70? Is it possible to install Linux on this laptop?
Post edited by: Vindsor
Hello
How did you create the partition, and you have created the partition for the use of Linux?
The fact is that you cannot use a similar kind of partition for the Windows operating system.PS: Unfortunately, Toshiba doesn't support the Linux operating system and you will find all the drivers Toshiba for this OS.
-
Satellite M70 - 159->; update bios-> DVD ROM missing
Hello
I have the Satellite M70-159, PSM71E
I made the big mistake, please help and suggestions are welcome.History:
I installed Windows XP home sp2
A few days ago I tried to update my hardware drivers (last attempt was a few years ago) and the BIOS too.
So, first of all, I decided to update the bios of 1.30 to 1.50
-bios150win has been downloaded and install completely and it works very well. But since then, that my laptop doesn't see DVD - ROM - it disappeared at all.
WindowsXP says - no CD/DVD-ROM in your stack of material, and I can't boot from bootable CD/DVD drive.I tried to downgrade the BIOS to 1.30 but the f * ng tool shows me a message that I have more new bios and I do not need to downgrade.
Hey! Toshiba! Please, give me a chance! Just remove your Bios update a few lines of code! Do not check the version of the bios.PPL! Please help. Because now I can't reinstall OS, I can't burn, I can't get my data, I can't do anything.
Thank you
MIMOThanks for the info, but could you please post how you solved this?
-
After update BIOS USB Ports not recognized on Satellite L500
Hello!
After a BIOS update to 2.1, two of my three USB Ports no longer work. Is it possible to downgrade to the previous BIOS? Or what else could cause this problem?
The system is a Satellite L500 - 153 (PSJ3E)
Post edited by: koocho
Go to Device Manager.
Remove all USB hubs and USB controllers in the list of devices.
Restart the computer and wait for Win has recognized and installed again all USB devices.
Then test the USB feature. -
Re: USB Ports on my S Satellite series do not work
I recently bought a toshiba satellite s-series and the usb ports don't work - code of host controller compatible usb xhci 39
I tried the things:-research on the internet for all issues
-Search the support site for drivers but they do not provide drivers usb for my laptop.
-Update and uninstall the driver.
-"Add legacy hardware" via Device Managerany help is greatly appreciated
Post edited by: raafen
If you need assistance, you must post the name of the exact model laptop and the OS you are using.
-
USB ports give power, but does not
Hello..
I have this model
HP Pavilion dv6 - 6155ee Entertainment Notebook
Today, I found that when you plug the mouse into one of the USB ports on the right side... it does not work, but the mouse gives light.
I tried on the USB Ports on the left side... It works well...
What is the problem now?
Good. You can try to reinstall Windows, but I would only if the usb port works under Linux. Otherwise, you are looking to replace this daughter card as Komdiv has helpfully laid out for you.
-
What USB port supports the 3 Protocol?
Hi all, what ports in W520 support USB3?
There should be 2 x 3 USB ports on the W520. They are blue and should be on the left side of the computer. Should be easy to find if you are looking for the two blue USB ports.
-gan
-
USB ports have power when the PC is shut down. Power supply connected to the battery.
PC is HP G62 - 222us W7 64-bit. When the PC was first powered, they gave me the option to allow USB ports ON or OFF after his stop. I chose IT, but now I want ports USB OFF after his stop. I can't remember have this option is found. Any help would be great. Thanks in advance for your help...
I found my answer: Control Panel Goto (W7), search for 'power', click "Change the Power settings", click on "USB settings", click on "USB selective suspend parameters", for the battery, select "Disable", except change, click OK.
Now, all USB PORTS are INACTIVE when the PC is shut DOWN.
-
Satellite M70-159: put disc HARD question
Hello.
I have problem with my laptop Toshiba M70-159.
When I have my laptop turned on, wait 2-5 minutes and my hard drive turn off why? I put in Toshiba Power Saver to never... when I click on some... my hard drive won't power on and I hear it. How can I make my drive hard not power down?Please help me, I have to get some software or what?
Hello
First of all, I would like to know why you are sure that HARD drive turn off 100%.
If you do not hear that the HARD disc spins, it does not mean that the HDD power off. -
Satellite M70-159: how to set the APM mode on the HARD drive?
Hello.
I have Toshiba M70-159 and I have problem with my HARD drive. My power to drive (FUJITSU MHV2060BH) down from 2 to 5 min... I put in Toshiba Power Saver "Never."
I now read http://www.fel.fujitsu.com/support/disk/manuals/m60_product_manual.pdf and I see maybe APM I put.
How can I configure Mode APM?1.11 advanced Power Management (APM)
The hard disk automatically switches to the mode according to energy saving the
setting the APM mode under the inactive state.
The APM mode can be selected with a number of sector register of ALL
Control FEATURES (EF).
The disk complies with the three types of modes of the APM which a command
from the host is necessary.
EN = 05 h: enable APM
SC = C0h - FEh: Mode-0 Active Idle? Idle low power
SC = 80 h - BFh: Mode-1 idle assets? Low power idle (default)
SC = 01 h - 7Fh: Mode-2 inactive assets? Low power idling? Standby
EN = 85 h: disable APM (Game Mode-0)
Active Idle: The head is in a position of extreme inner disc
Middle. (VCM Lock)
Overview of the unit
1-14-C141-E224
Low power Idle: the head is unloaded the disc.
The spindle motor.
Standby: the motor stops.
In Mode APM-1, which is the default APM mode, operational status moves until it
Finally reached "low power idle."
Table 1.7 Advanced Power Management
APM mode
Idle assets
(VCM Lock)
Idle low power
(Unloading)
Standby
(Spin-off)
Mode-0 0.2 to 1.2 s min. 15 s/o
Mode-1 0.1 to 0.2 sec 10.0 - dry 27.5 n/a
2 mode 0, 1-0, 2 s 10.0 - dry dry 27.5 10.0 - 40, 0
When was the maximum period during which the hard disk waiting for orders
exceeded:
Mode 0: Mode shifts affection Active Active Idle in 0.2 to 1.2 and low
Inactive power in 15 minutes.
Mode-1: Active status to Active Idle mode in 0.1 to 0.2 seconds and
low power idle in 10.0 - 27, 5 seconds.
Mode 2: Active status to Active Idle mode in 0.1 to 0.2 seconds and
low power idle in 10.0 - 27, 5 seconds. After 10, 0-40, 0 seconds in
Low power idle mode goes into sleep mode.
Note:
The default values for these settings are reflected in the values of WORD 91 of the
Command IDENTIFIER. In addition, APM mode is initialized with the Mode-1
(the default) to power off.
The above mentioned is time until the transition to each mode of power based on the point
that the reader becomes a State of waiting for order.How can I set Mode APM to disable EN = 85 h: disable the APM (Set Mode-0)
Where do I put? Please help me.
Hello
You can use either the Toshiba Power Saver that controls also the APM mode or you will remove him this tool and then you will use the Windows power management.
Here, you can change the settings for the APM mode.
Unfortunately the other options to disable the APM Mode are not known to me. -
Can satellite M70-159 - I replace the motherboard with another?
Hello!
The model of the M70-159-card mother K000033840 can replace another motherboard with a number K000033860?Thank you.
I put t know if it s possible because I m not a technician for laptop.
Normally, you should only replace the motherboard with the same.I put t know if it works. Contact a local ASP and ask for a technician. They know where the other is, and if it would work.
-
Can I use HARD drive of 160 GB on Satellite M70-159?
Is it possible to upgrade disk HARD Sat.M70 - 159 up to 160 GB (SATA)?
Hello???
Unfortunately there is no public document on this subject, but I assume that 120 GB should work on this laptop. I hope that someone here will be able to give more information. I have exactly the same model laptop but make sure you didn't upgrade the HARD drive.
If you have success with 120 or 160 GB drive HARD please let me know. Maybe I have will modernize my HARD drive also.
-
Satellite M70 - 159 OpenGL problems
I have a laptop with ATI MOBILITY X 700/256 MB and WinXP SP2 M70-159. The system stops responding when I run OpenGL applications with a large number of meshes limit (more than 12800 triangles) stored in a display list and I have to hard - reboot. The same apps will work perfectly in all my PC (with nvidia cards).
Any help is very appreciated!Hello
Please install the latest display driver and the latest version of DirectX.
Maybe you are looking for
-
How to prevent the deletion of text Word when drag / drop of Firefox?
When I'm dragging text from a Word document in Firefox, the text is always removed from the Word document! When I do the same process with Chrome, Chrome will leave the text intact in the original document. How can I get Firefox to do the same thing?
-
Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very an
-
Error code: 0x8024200D and KB2345886 will not install.
Original title: KB2345886 will not install little matter what I do. Can you tell me how to install? I tried almost every suggestion Fix - it that was given to me, and yet there is not way to this KB to install. I have also received an error 0x80242
-
#include using namespace std; Sub main() { int a, b, c; cost< "input="" three="" integers: =""> CIN > a > b > c; return; } Run program: Entrance of three integers: 10 25 b Physically, what happens when the 3rd input is read from the input stream? It
-
How to carve, and concatenate the two text fields in a form
Hi people,Newbie here... have two fields in a form: FirstName and LastName. Want to have these appear later as: name, first name.For example: 'Rick' "Stockstill" should later manifest as: 'Stockstill, Rick' with a comma separating the names and tr