What Version of the utility Airport do I need?

I have 2 Apple Airport Extreme Base Stations.

On my old Dell Dimension 9200 running XP Professional Service Pack 3, I use Version 5.5.3 of Airport utility.

Now, I want to download Airport utility for my new Dell Precision Tower 5810 running Windows 8.1 Pro 64-bit.

What Version of the utility Airport should I download to my new computer?

The latest version of the AirPort for Windows utility still is 5.6.1. He was released in 2012, so it's a bit outdated. I used it with Windows 7, 8, & 10, but he will not be able to administer the current base station 802.11ac airport.

Tags: Wireless

Similar Questions

  • The utility Airport and Time Capsule, not appear...

    Hello all! I have an old TC (not sure how old but less than 3 years) which appears in Airport utility on my iPhone but not on my Mac. I have my TC in Bridge mode.

    During the night, we lost our internet connection so this morning, I restarted my modem/router to Comcast. He looked like my TC starts fine but when I open the Airport utility on my Mac it isn't here, but if I open Airport utility on my iPhone 6 is here. I wonder why it appears on one and not the other...

    Thank you for your valuable information and knowledge! Judy

    You only need a device with AirPort Utility installed to be able to administer all the airport on your network routers... and, as you have found... the software on the iOS version of the utility is better than the software on a Mac.

    Thus, an option would be to use Airport utility on the iPad and not to use it on the Mac.

    If you want to keep the AirPort Utility to work on your Mac, there are some settings to check and possibly change that could help with the "airports endangered" issue, who is with us for a few years.  No guarantee that this will help, but it won't hurt either. If you have 10-15 minutes free to work on your Mac, and we'll see what we can do.

  • What version of the PCI Express x 16, it's my motherboard has

    I am running:

    Pavilion - p6320y

    -AMD Phenom II X 4 820

    -8 GB RAM

    -SATA HARD DRIVE 1 TB (7200 RPM)

    -Motherboard model: Violet6-GL8E

    Question: What version of the PCI Express x 16 is the slot on this motherboard: 1.x, 2.0 or 2.1?

    Can't get this information anywhere.

    Hello:

    I don't think that anyone will be able to give you a definitive answer.

    This article gives the date for the PCIe ranges various x versions.

    http://en.Wikipedia.org/wiki/PCI_Express

    Since you have a relatively new PC, I would say that it is certainly not less than PCIe 2.0 and probably PCie 2.1.

    I have a HP 8200 Elite CMT. I think that it is released at the beginning of this year, or very end of last year. 6570 PCIe 2.1, I use an AMD Radeon card in my PC.  It works very well.

    Paul

  • What version of the Android is available on the PlayBook?

    Hello

    What version of the Android is available on the PlayBook?
    Is this the same as BlackBerry 10?

    Thank you

    This is Android 2.3.3 for the PlayBook...

    http://developer.BlackBerry.com/PlayBook/Android/documentation/mastertopic_playbook.html

    and 4.2.2 for BB10...

    http://developer.BlackBerry.com/Android/documentation/gettingstarted.html

  • What version of the BlackBerry browser supports the HTML5 video element? Any estimate of the number of blackberry phones that support video?

    What version of the BlackBerry browser supports the HTML5 video element? Any estimate of the number of blackberry phones that support video?

    The

    https://developer.BlackBerry.com/HTML5/documentation/html_elements_2006657_11.html

  • What version of the correlate of InDesign to the Viewer version 15 tools?

    Hello

    We are currently in transition our digital production in the artistic director off-site House.  At present, our published application is version 15.  As we would like to be able to create content that can be published without problem, what version of the panels in InDesign tool should we use?

    If you have created a v15 Viewer, you want the 1.5.0 tools producer Folio (01/09/2011). Archived tools are found here:

    http://www.Adobe.com/support/downloads/collection.jsp?collID=4&platform=Macintosh

    http://www.Adobe.com/support/downloads/collection.jsp?collID=4&platform=Windows

    To Panel Folio Builder and the Builder Viewer app, you must use the most recent versions.

  • Calling method invokes what version of the application

    Hello

    Someone might know me if I invoke a process by using the method of appeal. What version of the application can get called.

    Lets say that I have no application like MYAPPLICATION and a process CLASS, version of this application is 1.0.

    When I deploy this application, I use MYAPPLICATION/CLASS and pass it the parameter map. So she calls the process.

    If I create a version more this application say 1.1

    then, my method of invocation calls on which version of the application.

    I'm confused because we do not define any version in api call.

    He calls last application?

    Concerning

    Sunil

    Hi Sunil,

    Yes, he'll call the latest version deployed and active in the process.

    Kind regards

    Thomas

  • What version of the OS on the recovery partition?

    If I installed 10.11.2 BONES, what should be the version of the recovery Partition?

    It will most likely 10.11.1. I don't think that Apple has revised the Recovery HD for 10.11.2. As long as you can start the computer from it, the actual installed version is not important. If HD recovery is not compatible, it will not be able to start the computer.

  • If we improve FI 6296UP UCS 3.1, what version of the firmware for our 9148 MDS is interoperable?

    We are looking at upgrading our UCS UCS 3.1 environment.

    We currently organize UCS 2.2 (3 c) on our FIs of 6296UP, and our 9148 MDS switches are currently on firmware 6.2(5a)

    If we improve UCS to 3.1 (1e) or 3.1(1g), how do we find what MDS firmware version will work best for us?

    Interoperability matrices I found so far indicate what firmware and drivers for the HBA/CNA adapter to use, but seem to not very specific with what MDS switch firmware version to use with which version of the UCS.

    Is this something that Cisco has no guidance on?

    Hi, DQ.

    If you look at the link (table 1-4) this should help show what MDS firmware below works better with respect to UCS;

    http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/MDS9000/Interop...

    It says expressly "NX - OS 6.x and higher of table 1-1" which is on Page 7 and 8 of the guide above.

    Please note and mark the correct answers to other users can find specific solutions easier.

    Hope this helps,

    Qiese Sa'di

  • What version of the American Greetings CreataCard software is compatible with Windows 7 Ultimate?

    I had Windows XP and American Greetings CreataCard Gold Version 2. 1 worked perfectly.  Now I have Windows 7 Ultimate and the city Version 2. 1a does not at all.  Kindly advise me, what version of American Greetings GreataCard is compatible with Windows 7 Ultimate?  Best regards, jenny.

    Better to visit their web site. They will be more if something is not compatible. Ultimate should work fine with its XP mode Simulator. Check this. It should solve your problem: http://www.microsoft.com/windows/virtual-pc/download.aspx.

    This is the same advice I gave a couple of days. It will not change. This isn't a problem of Microsoft. Frenchie

  • WHAT VERSION OF THE CONVERTER DNG INSTALLS

    I TRIED TO DOWNLOAD ADOBE DNG CONVERTER, BUT AFTER TRYING DIFFERENT VERSIONS OF MY PC ME SAYS THAT HE CAN'T RUN A PARTICULAR VERSION, SO IM STUCK AS TO WHICH VERSION TO DOWNLOAD.  Thank you

    What version of Windows are you using. For the DNG Converter, you should be able to use 9.1.

  • What version of the Visa Runtime executable files compiled in LabVIEW 7.1 require?

    We have an old executable that was written in LabVIEW 7.1 and uses the serial port communication.  We are licensed with LabVIEW 2010, however our company policy requies a lot of paperwork so he should recompile.

    The executable program has worked well over the years.  The computer on which it is running has to be replaced. Any software included in the CD 'Install' is not enough, and now there is no communication with the serial device.  I guess the problem would be DURATION VISA European Commission.

    Does anyone know which version of the Runtime VISA is required for executable files compiled in LabVIEW 7.1?  Is this something of "Legacy"?

    Thank you in advace for assistance.

    Glen

    Aside: I ask: anyone actually trying to make a search more? This must be the fourth issue that I saw this morning that could have been answered easily if a simple search had been made before posting.

    http://digital.NI.com/public.nsf/allkb/E7C93038169B6E7686257847004B8B9C

  • What version of the pci express x 16 graphics cards can handle office of a747c?

    What versions of pci Express x 16 graphics cards can handle desktop a747c?

    Your motherboard must support PCI Express v1.0, v1.1 and v2.0 cards without a problem. v2.1 and newer cards can be problematic.

  • What version of the Raw plug in CS1?

    An archaic question, I know. I'm using CS1 on my laptop (I know, I know, I need to upgrade), and I wonder which version of the Camera Raw plugin, I use with it. I don't see anywhere where it shows the version.

    I ask because I need to know how far back, I need to go with the versions when I convert Adobe Raw Converter (so I can open my Panasonice raw files in my old program).

    It is either Camera Raw 4.6, 4.1, or 2.4. (I guess this is 2.4 which makes the converted files HUGE, 56 MB of a 18 MB raw file, geez).

    Thank you. D.

    This is camera Raw 2.4 in CS1.

  • Trial DVD updates... what version of the updates?

    Greetings,

    I have a slow internet connection so I opted for the free trial DVD (single drive) instead of the electronic version downloadable. I wanted to know if I use the 'electronic' or updates of the DVD of "detail" for programs like Premiere Pro and After Effects CS5? I do not use the "update" of programs because it comes more than 1 GB. However, I have a faster connection to work but that you can't put in my office. I would like to download the updates using my laptop.

    Thanks for the help

    Jan

    > I do not use the "update" in the programs because it comes over 1 GB.

    You should definitely use this method. The only reason to use the manual download is if you need to download using a computer (which is connected to the Internet) to transfer to your computer that is not connected to the Internet.

    It is absolutely crucial that you use the correct update for the version of the software you have installed. If you installed from a DVD, you must use the update for the DVD sales retail version. If you installed from the electronic download, you must use the update for electronic download (which confusingly has the word "trial" in its name).

    Do not use the correct update will stop at your application.

Maybe you are looking for