What were two active alarms at the same time blackBerry 10 freeze the phone

Similar Questions

• The Task Manager currently has two active users in the console session, but I am the only user.

  Task Manager

  my task manager currently has two active users in the console session. I am the only user of the computer and when clicking on USERS it always shows only one user. What or OMGE could be the cause.

  Hello

  Open the Task Manager->, click on users-> right click on another user who isn't currently active and choose log off.

  This can occur when the user account is not properly disconnected.

  I hope this helps.

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• alarm when the phone is turned off

  I tried to keep an alarm with the phone turned off.

  But it dosent ring.

  is there any setting to change this

  Thank you

  New-generation devices are not able to do.

• Q is there away from keep two active windows on the desktop? Using Sandboxie with one of the windows...

  start two game clients 'same game' on my desktop, but when I switch between games, the title on one of the windows changes and freeze the game inplace until I click on it... Q is there away from keep two active windows? Use Sandboxie to run the second client of the game...

  Hello

  (a) what game are you trying to play?
  (b) is an online game or software installed on your computer?

  You have contacted the support of Sandboxie, to determine if the program is able to provide this functionality.
  To do this, click on the following link: Help of Sandboxie
  If it's an online game, you can also use the new session under file in Internet Explorer to connect with two different credentials.

  Thank you, and in what concerns:
  Swati Keni-Microsoft Support

• Two active sessions in the two tabs of the browser - how?

  Hello!
  
  I use custom for logging into my application authentication. It uses an internal table to the verification of user name and password. The rest of authentication is handled by the APEX. Here's my process of login on the login page:
  

  declare
    v_auth_successful boolean := false;
  begin
  
    v_auth_successful := pck_auth.authenticate(p_username => :P101_USERNAME,
                                               p_password => :P101_PASSWORD);
    
    if v_auth_successful then
      
      wwv_flow_custom_auth_std.post_login(
          P_UNAME       => :P101_USERNAME,
          P_PASSWORD    => :P101_PASSWORD,
          P_SESSION_ID  => v('APP_SESSION'),
          P_FLOW_PAGE   => '&APP_ID.:1'
          );
    
    else
      owa_util.redirect_url('f?p=&APP_ID.:LOGIN:&SESSION.');
    end if;
  end;

  My problem is that I can't have two active sessions of simoultaneous in two browser tabs. When I login in the app in the first tab, I can navigate fine enforcement. But as soon as I open a second tab and a newspaper in the application (with the new session ID), the first tab stopped working - I get redirected to the login page. And when I log in again, the second tab not working anymore... etc.
  
  Example can be seen here: [http://apex.oracle.com/pls/otn/f?p=47326:1 | http://apex.oracle.com/pls/otn/f?p=47326:1]-just open this link in both tabs and connect (any name of user and password will do)
  
  Someone knows how to fix this? According to me, Miss me something (in my authentication scheme?)
  
  
  Thank you
  Swear

  I think that the OP's question is can this behavior be easily extended to applications that have been built in the APEX, not only the builder himself.

  This would require a sentinel of custom page common to all applications that conform to a particular session of the management rules set, regardless of those who are. The exact requirements (functional specifications) are too vague for me.

  Scott

• I took a sim card to an iPhone and place in another.  What should I do next to the phone with the sim card replaced?  The screen and apps are from the old phone...

  Hi, my wife 4S iPhone died and I I replaced his Sim Card with my old s 4 card as I have updated.  She is still decide to upgrade, but needs a phone so replace the sim card seemed like a good thing to do.  So now his phone has all my contacts, applications etc on it and none of his own.  What is the next step to have his stuff on his phone?  Is this to connect to its MacBook or reset the phone and connect.

  Thank you.

  Has a backup via iTunes or iCloud of his old phone before he died? If so, what follows has instructions. Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

  Note that since the phone is already implemented (i.e., no news, the first step will be to follow the instructions below to the bottom of this link.

  To transfer a backup on a device, you have already configured, you need to clear the device: tap Settings > General > reset > erase all content and settings. This erases all the data that is currently on your device. After you erased, your device will restart and you will see the screen of 'Hello '. Now, you can transfer a backup of your device.

• A way to keep active Wifi when the phone screen crashes?

  I noticed that, although my wifi signal is lower than we should, it is not randomly drop out. He does, however, is drop out whenever the phone screen will Dim and locks (IE, home struck and then slide to unlock).

  It's incredibly annoying! Is it possible to keep wifi on and connected to what I explicitly disable? It makes the option "synchronize then on the wifi only" totally useless. And I'm on wifi almost all the time. Whenever I open the phone, I expect to be in wifi to do something - not wait for a reconnection.

  Seriously, it is a show-stopper for me. If I can't find a way to keep the wifi between the locks of the screen, I have to exchange the phone for anything else.

  Surgo wrote:I've noticed that, while my wifi signal is weaker than it should be, it doesn't randomly drop out. What it does do, however, is drop out whenever the phone screen goes dark and locks (ie, hit home then slide to unlock).
  
  This is incredibly annoying! Is there any way to keep wifi on and connected until I explicitly disable it? It makes the "sync while on wifi only" option entirely useless. And I'm on wifi almost all the time. Whenever I open the phone, I expect to be on wifi to be able to do something -- not wait for a reconnect.
  
  This is very seriously a show-stopper for me. If I can't find a way to keep wifi on between screen locks, I'm going to have to exchange the phone for something else.
  

  As far as I know, you can tell the standby policy wi - fi to do 1 of 3 things:

  (1) when the screen is off

  (2) never when it is plugged

  (3) never

  You can get these settings by migrating the following steps:

  1. Parameters
  2. wireless & networks
  3. WiFi settings
  4. menu key (lower-left)
  5. Advanced
  6. policy watch Wi - fi

  If there is no other means, I would like to learn them as well.

• I bought the iPhone 5 c but I phone Cloud is locked.  What can I do to activate the phone?

  
  

  unlock phone 5 c

  You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

  Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

• RESOLVED: External Volume RAID 5 TPG "split into two" once connected to the new Windows 7 64 bit install

  I have an AMS Venus T5J external drive enclosure (DS-2350J); It is filled with disks Western Digital 1 terabyte Caviar Green 5, model WD10EADS.  The device of Venus using a control panel with a JMicron JMB393 chipset, which is able to create RAID volumes to a connected host system transparently.  I used it to create a volume of 4 terabyte RAID 5 covering all five disks.  I've been accessing using a laptop Toshiba P105-S9337 with a card PCMCIA Vantec eSATA interface, which worked, but was not very effective.  Of course, it was necessary to structure the volume as TPG due to its size.  That has been a challenge.

  My primary system was Windows XP 32-bit installed, which does not support GPT disks.  I experimented with Ubuntu and another distribution of Linux, which supports the GPT, but ran into problems to mount the RAID 5 volume transparently (it may have partially been my inexperience, but it * should * have been easier).

  So I decided I have to install Windows 7 on this system, so that I could get access to this RAID her volume.  The system is based on an Asus M2N SLI Deluxe motherboard, which has an eSATA port integrated driven by a JMicron JMB363 chipset (NOT capable port multiplier).

  Windows 7 installation, installation of the JMicron driver for the motherboard and log box RAID, Windows little wanted to assign the 'disc' a new disk ID in order to to use.  I met regularly this process in the past without problems, when the new disks are presented on a Windows system, so I thought that anything that allows him to do.  However, has as expected making accessible existing volume.  After investigation, I discovered that Disk Manager believes that there is a space UNALLOCATED 1.67 TB and nothing more!

  At this point, I was naturally anxious, because I had data on the volume.  I checked the volume by connecting it to the laptop Windows 7 (32-bit) with whom he had previously worked and found a slightly different and more revealing image in disk management: there were TWO regions illustrated for the disk, an exactly 2 TB and the other TB to a 1.67, this last occupant clearly space greater than 2 TB.  These two regions, yet once, were listed as unallocated.  In both systems, Windows 7 was also clearly assumed the volume she TPMS, since the two I saw the option convert to GPT... which is already!

  That's happened?  Simply allowing Windows write a disc ID to this volume somehow corrupt?  How can I recover the previous volume of 3.67 unique TB who was present?  Should I just order in disk management to convert it to a GPT disk?  Is a non-destructive operation?

  I solved this problem with a perfect result...

  In short, I could use TestDisk to recover completely with all data intact original partition table.  It took several tries, several hours waiting for the paint to peel (scanning) and finally a brief dialogue with the proponent (Christophe Grenier).

• Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

  I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

  Should I turn off my Touch ID?

  Basically my home button button and / standby works not together at the same time.

  You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

• BlackBerry classic to silence the phone!

  I tried repeatedly to place my classic Blackberry on all parameters that would produce no noise, and yet I did not. Some notifications remained silent, although the phone would always sounds. I tried to do the following:

  1. keep in normal and slide the bar of his all the way to the left (under the active profile) and lower the volume keys.

  2. turn on silent, vibrate only, meeting, bedside, do not disturb

  3. I tried to create my own custom profile

  Once I got to work (don't know what I did), Could't get the phone to ring again for hours until I started to play again with the profiles of school boards. I don't have it should have this trouble placing silent and keep it this way.

  * For all those that I created a ringtone (about 4 people), these people certainly will ring through any silent profile. I don't remember having this problem with the blackberry "BOLD". Thank you for any assistance.

  I wanted to add that reading is fundamental! The do not disturb is the the way to silence calls. It clearly states the installation and tutorials provided with the phone. I've had this phone for months and somehow, I forgot it and I'm here in the middle of going back over all night reading.

• Connect to iTunes via the phone

  How can I connect the phone to iTunes?

  How/where to connect?

  If you didn't have iTunes on your computer and then connect it to your computer - if your computer iTunes doesn't recognise it (what version of iOS is on the phone? which version of iTunes on the computer?): If iTunes does not your iPad, iPhone or iPod - Apple Support

  If you mean that your phone cannot connect to the store: If you can not connect to the iTunes Store - Apple Support

• Why the phone Version appears as the desktop version when it is online

  I designed a website in Adobe Muse. I also did a layout of the phone. The site is now online. On the phone, the site opens in the phone, layout, but after the use of navigation, the site was moved to the desktop version, which is not readable on the phone.

  What can I do to make the phone work properly?

  Looks like you need to update your navigation so that the buttons link to versions of the pages rather than the office phone those?

• Two virts never share the same host... What are my options?

  Hi all

  Ive got two virts which are nearly identical and work in an active/active load. What are the options I have to ensure that these two virts never end up on the same physical host?

  I'm not looking for FT. I'll have two functional virts at the same time.

  Thank you!

  You can do this by setting VM - VM DRS anti affinity rules.

  André