"Whatever.exe has stopped working, windows is checking for a solution to the problem."

Similar Questions

• When I try to use the webcam with Skype it blocks Skype and said "Skype has stopped working, windows is checking for a solution."

  Original title: lifecam 3000 and Skype does not?

  Hello, I tried the two 5.5 beta and 5.3. When I try to use the webcam with Skype it blocks Skype and says "Skype has stopped working windows is checking for a solution." I have windows update connection bars 4/5 drivers and my computer ==> http://www.newegg.com/Product/Product.aspx?Item=N82E16883103361 help is appreciated, thanks

  Hello, I had just fixed yesterday. I deleted the drivers and programs that accompanies it, it ends up being the lifecam software that comes with it interfering with Skype, thanks to all who help :)

• Error when you try to use VoIPBuster to place VoIP calls: Client for VoIP calls has stopped working. Windows is checking for a solution to the problem.

  Client to make VoIP calls

  I recently started having problems, make VoIP calls from my computer.  I use VoIP Busters (and using it for a few years without any problems).  Evertime I try to call the destination phone rings a couple of times and then stop.  The next thing that happens is an error message that says: "Client for VoIP calls has stopped working.  Windows is checking for a solution to the problem.  It is followed by another screen that says: "a problem caused blocking the program working properly."  Windows will close the program and inform you is a solution available. "  Nothing happens.  How to overcome this problem.

  I finally had to resort to the re-installation of Windows.  This solves the problem.  But don't forget to back up your computer and email address / addresses before you do.

• While opening a program get an error message: program has stopped working, Windows is looking for a solution

  Original title: error message:

  When I try to open one of my programs, I get an error message states that my program has stopped working, Windows is looking for a solution

  Hi SheilaFrenchman,

  ·         Are what program you referring?

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

• auto blog software has stopped working. Windows is checking for a solution to the problem not closed Windows program and you contact if a Solution is available. __

  I can't get my autoblogging software to run on Vista. I know it works with vista, because other users have on their machines. The developer also said it works on vista very well.

  For some reason, it does not work on my machine. I installed 2 different versions of the software and both give me error in the title of this thread immediately. He doesn't have the ability to load up and fail or anything he just lift the error immediately.

  for purposes of test and restore my sanity a little I have installed this software on an old laptop running XP and a desktop running xp, after installing the software I opened the first time and on the laptop, I got this same error, however XP let him program continues to work and he opened and held its positions. The Office opened and ran without error.

  So my question is why this software is triggering this error when I open it up on top of my vista machine, and how can I work around this problem or solve the problem, so I can use my software.

  The error indicates that microsoft will let me know when a solution is available, but that never happens.

  Any light you can throw on that would be great.

  Try to run the software in Compatibility Mode: http://www.vistax64.com/tutorials/75909-compatibility-mode.html to see if that helps.

  What is the EXACT error message (Word for Word)?  What version of Vista you are using?  What is the name and version of the software (and the Web site if you have one)?

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps. Please include answers and results in your response if it does not work.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to solve the questviewer.exe has stopped working windows 7

  How to solve the questviewer.exe has stopped working windows 7

  using the analysis

  http://www.Malwarebytes.org/

  Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

  Also look for viruses either using avast and spyware using superantispyware

  go to msconfig (type in the search box in startmenu or run in xp, and then press enter) then prepare your computer to clean boot by disabling all startup items and any of the services of windows, and then restart your computer. See if it makes a difference? If it did then you know who caused the problem.

  you will also need to know is that "questviewer.exe"? It belongs to a program? If the answer is Yes try to update or reinstall the program, but before that make sure that the program is not hamful to your pc.

• Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem

  Original title: games

  When I start my X Microsoft Flight Simulator (Deluxe Edition), it is running propely for some time (15 to 20 minutes) that it no longer works and gives me a message "Microsoft Flight Simulator has stopped working. Windows is looking for a solution to the problem"and he have me to close the program. (I have Windows 7)

  Help, please. :)

  I just "uninstalled" pack of the accelerator, and it worked fine.

• Autorun.exe has stopped working on my computer

  I can't install or run any games.  About 2 months ago, I noticed that I could not play any of my games that require a cd.  I uninstalled all the games and tried to reinstall.
  I get the same message autorun.exe has stopped working windows will search for a solution.  I researched the problem on Google, did not see the problem in my registry. did not change anything in the registry since I was too chicken to do so blindly. Help?  no idea what to do other than a complete wipe and reformat:(prendre àle moins une semaine pour remettre à jour tout ce que si je le fais.)

  You need not autorun to work to play games.  Install the game by running the setup.exe or similar file when you browse the contents of the CD/DVD.

• can't access games - onplay.exe has stopped working

  I can't access my games when I click it it says onplay.exe has stopped working windows is looking for a problem, but nothing does.  Can you help me?

  [Moved from comments]

  Hi Sue,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems with a game does not.

  1. what operating system is installed on the computer?

  2 what is a line or a game offline?

  3. If it's an online game then what browser do you use to access the game?

  Answer the questions to help you best.

  Good day!

• Age of empires online Windows crashes with the error message"is looking for a solution to the problem"

  After signing in games for windows marketplace, then click play on the age of empires online, the game stops and says windows is checking for a solution to the problem.  What is the problem?

  Hello

  Method 1: perform the steps from the link below and see if it helps.

  Game hangs or quits unexpectedly

  Method 2: perform the steps from the link below and see if it solves the problem.

  The problems of performance of the play (Windows 7)  

  Hope this information helps.

• Adobe AIR 19.0.0.193 - Windows 7 - crash App - MyApp.exe has stopped working

  My app crashed and think it's something with the latest AIR beta.

  App has receiver eception of errors, but there is no pop up. Only "myApp.exe has stopped working" Windows dialog box.

  App has been normal work for a long time, so I doubt that the bug is in my application, but it could be.

  Accident was under Windows 7 64-bit, 4 GB RAM

  Here are the details of the error:

  Name of the failing application: MyApp.exe, version: 0.0.0.0, time stamp: 0x4eb75ae0

  Name of the failed module: Adobe AIR.dll, version: 19.0.0.193, time stamp: 0x55f764b7

  Exception code: 0xc0000005

  Offset: 0x00153c5d

  ID of the process failed: 0xd34

  Start time of application vulnerabilities: 0x01d1044a1a2a7134

  The failing application path: C:\Program Files (x 86)------MyApp------MyApp.exe

  Path of the failing module: c:\Program Files (x 86) \Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll

  It was a bug in my application. Still wonder why he did not uncaught error events...

• VTWAIN.exe has stopped working

  I am installing a Summit photo fix Copier .This turns negatives 35 mm digital when I choose prints an error message says VTWAINEXE .exe has stopped working?

  Hi Jd19510,

  Welcome to the Microsoft Answers site.

  ·         What is UTWAINEXE .exe or VTWAINEXE .exe?

  However, try to run the computer in the boot to check if applications or services are at the origin of the problem.

  Clean boot

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  (1) perform the clean boot

  i. Click Start, type msconfig in the search box and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  II. in the general tab, click Selective startup.

  III. under Selective startup, clear the check box load startup items.

  IV. click the Services tab, select the hide all Microsoft Services check box and then click Disable all.

  v. click OK.

  VI. When you are prompted, click on restart.

  VII. after the computer starts, check if the problem is resolved.

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135 .

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (i) click Start, type msconfig.exe in the start search box and press ENTER. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  (II) on the general tab, click the Normal startup option, and then click OK.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. »

  Original title: webcam inspiron 1420

  I tried to start my webcam and it gives me a message that says: 'LiveCam.exe. has stopped working. "I checked and it is said that it works correctly.  I also looked and found something that seems to say that the app crashed.  Any ideas?   Thank you

  BFM

  Hi BartMorgan,

  ·         What is the error correct mrssage?

  ·         Is - this "LiveCam.exe has stopped working" or "LifeCam.exe has stopped working"?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  You can also check if the troubleshooting steps to help you in the article mentioned:

   

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266612

  Method 2: Alternatively, you can try to uninstall and reinstall the drivers of webcam and check if that helps.

  Step 1: You can try to remove the webcam in Device Manager:

  a. click the Start button, in the start search box, type devmgmt.msc and press enter.

  b. in the Device Manager window, click view , and click Show hidden devices

  c. right-click on the webcam is installed.

  d. in the dropdown menu, click Uninstall or Remove.

  e. in the dialog box to confirm the device removal, click the OK button.

  Step 2: Also verify and uninstall the webcam again from programs and features program, if it is installed and then restart the computer.

  a. click Start.

  (b) in the search box to start, type appwiz.cpl and press enter.

  c. in the programs and features list, select the webcam program and Uninstall it.

  d. restart the computer.

  NOTE: After the reboot, the computer should recognize the connection of the camera and start to reinstall the driver.

  I hope this helps.

• Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working.

  Original title: pamke.exe

  Whenever I turn on my laptop the first thing he tells me is that Pamke.exe has stopped working. Can someone tell me please, what the heck is trunosc? I googled but no dice. Is there something wrong with my laptop? How can I fix? I'm kind of a perfectionist, and I'm tired of seeing it every day. Any help would be greatly appreciated. Thank you.

  Hello

  1. When did you start to question?

  2 did you recent hardware or changes to the software of the system?

  Method 1:

  You can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Method 2:

  You can also read the following article to run the Microsoft Safety Scanner and perform a full scan on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.