WhatsApp sound after update ios10

Hello, after updating to ios10 my sound of whatsapp is identical to my e-mail (threetone). In whatsapp, I chose a different tone but no matter what I do, its always the threetone. Can someone help me with this? Best regards, Gerard

Advertisement

Have you updated the Whatsapp application lately?   A couple of days, they have released an update for iOS 10.

Tags: iPhone

Similar Questions

  • I had to reformat after an attack from windows xp repair. No sound after updates

    I had to reformat after an attack from windows xp repair.  After the installation of Windows and all of the things drivers worked very well.  After updates, no noise.  So I reformatted again, installed Windows and all the drivers except the sound.  Done all updates, and then made the hardware update for my sound card in Microsoft.  Its worked. Tested with the music of the sample, had all of the clicks et al.  Then I restarted the cpu.  Turn off its worked, the turn is heard started and stoped the half way through.  No more sounds.  I tried all the round he took back on things.  Can someone help me.  My cpu is a Dell XPS 400 Dem, card his Creative SB Audigy 2 ZS (WDM)

    I think I'll try another sound card.  You pc is quite old and components go wrong.

  • Videos playing only with the sound after update 49.0.2

    After updating Firefox to 49.0.2 I have problems with videos on sites like: http://www.cc.com/video-clips/07m87l/the-daily-show-with-trevor-noah-donald-trump-hints-at-a-not-so-peaceful-transfer-of-power or http://time.com/4514971/iphone-7-worlds-tallest-building/

    It has sound, no picture, just black background. Decommissioning of 48.0.2 helped, but Netflix videos do not work on this version.

    (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful. (2) in the above list, type or paste async and pause search box while the list is filtered (3), double-click the preference dom.ipc.plugins.asyncdrawing.enabled to switch the value from true to false

    This may not take effect until the next time that you exit Firefox and start it again.

    One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

    • button '3-bar' menu > '? ' button > Troubleshooting Information
    • (menu bar) Help > troubleshooting information
    • type or paste Subject: support in the address bar and press enter

    In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

    If you use e10s:

    To determine if this feature is causing this problem, you can turn off as follows:

    (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

    (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

    (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

    Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

    On your next startup of Firefox, it must be run in the traditional way. Any difference?

  • WhatsApp alerts does not not after update iOS10

    I upgraded to iOS10 last night and since the update my custom in WhatsApp alerts are no longer works. Any sound, I set the alert, I get only one defect, his credits when I receive a message.

    Anyone know if this can be corrected by the intervention of the user, or that it does not require an update app WhatsApp will have to produce in the next few days?

    With the help of iPhone 6/16 Gb - WhatsApp v2.16.10 - iOS 10.0.1

    I had the same problem with the MS Outlook application.  Uninstalled and reinstalled the app to fix.  Takes screenshots of the app settings before I removed it.  I hope this helps.

  • headphone 3.5 mm jack does not properly after update iOS10

    Headphone Jack is not working properly since I have updated to iOS 10, now on 10.0.2, before you start, I would say that my headphones work perfectly, I tried on other equipment, including my old ipod.

    So, here's what happened, whenever I plugged and you try to play a song on music or a video on youtube, I could not get any audio, restart the phone partially solve the problem, I managed to play ringtones in the settings menu without any problem, on both my headphones and loudspeaker at the same time , which I don't know if it is planned, I think it must have something to do with some bugs in iOS 10?

    someone at - it a similar experience or a solution?

    Hi oramicle,

    On the device that you have a problem? I also have this problem on the iphone 6 s. On two different helmets. It's certainly iOS 10.x, because I don't have this problem on the same device and helmet on iOS 9.x. I sent the bug report to Apple with this description:

    After some headphone output (jack 3, 5mm) at the moment does not work on iphone 6s 128GB, iOS 10.0.1 and 10.0.2 - no sound from the headset. Volume controls and MIC still works. When I make a call with the headset plugged and tapping on the microphone, I hear sound for headphone listening, but the others its not. No noise in other applications. Restart the temporary fix of the device this problem.

  • Crasches app notes after update iOS10

    I've just updated to iOS10 on two iPhone 6 and a mini iPad 4 and has problems with the Notes application on one of the phones. On the other two devices it works great so far.

    But on an iPhone 6 I can open Notes, then he crasches after maybe 3-4 seconds when you synchronize. When I switch it on airplane mode works very well. There seems to be something with the sync will *.

    Anyone who has had the same problem and have a fix?

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Alternatively, you can go to settings - general - reset - Reset all settings

    If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

    Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support

  • Qosmio F30-147 - no sound after update driver

    Hello

    you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

    Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

    hosts of the Germany, sry for my English untrained! Help, please!

    Hey,.

    This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

    Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

    Check this box!

  • I lost my sound after updating my audio and video drivers

    After the download and installation of updates of my audio and video drivers, I lost my audio device. My Volume mixer, I get the message "no audio device is installed". At this point, I am really confused and frustrated after sent to websites other than Microsoft to get answers. Any help will be greatly appreciated.

    I have updated drivers AMD and ATI Radeon, neither of which are on my task bar more as they were before the update.

    I use "Windows Vista Home Premium Service Pack 2" at the moment.

    Model: HP Pavilion dv7 Notebook PC
    Processor: AMD Turion (TM) X 2 Dual-Core Mobile RM-72 2.10 GHz
    System type: 64-bit Operating System

    Hello

     
    I suggest you to follow the steps in troubleshooting section and check if it helps:
     

     
    Also, follow the steps from the link:
     
  • name of product-HP Pavilion dm1 Notebook PC, you hear no sound after update window 8

    name of product-HP Pavilion dm1 Notebook PC

    product number - QB382PA #ACJ

    After the update for a few days, I could hear the sound of my laptop. now I'm unable to get sound and same card for my sound device. Help me solve this problem. Thank you.

    Hello

    Try the following.

    Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

    Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

    After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

    Recovery Manager - Windows 8.

    Kind regards

    DP - K

  • Alarm brings more sound after updating iOS 10

    The alarm makes more no noise. I updated my phone a few days ago and initially, it worked, but now when the alarm "goes off" there is no sound. The volume is on and more strong, the phone rings when someone calls and other notifications make noise, but not alarm. Even when you choose a different alarm, no sound (usually, you hear a sample of the alarm). That I am I doing wrong or what happened?

    Same problem, restart a phone help but only for a few days...

  • CANNOT IMPORT PHOTOS/CONNECT TO MAC AFTER UPDATE IOS10

    Try to import photos or videos of my iphone 6 s to my macbook pro 09. Before the update to ios10, I had no problem doing this. I have chosen to APPROVE this computer, when the notification appears on my phone. Now, here's the problem, I get this message on my computer when you open iphoto and image capture. "Pictures on the Filmstrip on"iPhone"cannot be imported because the iPhone is locked with a password or read." I don't have a password well. I even created a new phone password just to see if it would work, and he never even gave me a chance to enter one. Tried to turn the phone on/off switch, unplug the power cord, reopening of image capture programs. Do not know what is happening since this new update to ios. Any ideas?

    Ditto for me, picture see the iphone IOS 10.0.0.1 as a player and there display "no name". Any help?

  • Notes app works is not after update ios10

    Hı, notes app not opening after ios 10 updated on my iphone

    I had the same problem. I opened and he immediately closed. It's easy to fix:

    Open settings > iCloud and disable iCloud for Notes. A prompt warns you that this will delete all the notes in your device iCloud. Confim invites her and open your notes application.

    Return to the settings and activate iCloud for Notes again.

    Open your Notes app again. It will now download all of your notes to iCloud and completely function. He did at least in my case. :-)

  • No sound after updates

    I use a HP Envy TS m6 Sleekbok running windows 8.1 64-bit.  It is only my second day using this computer and asked do updates from HP to it, I have no sound?

    Cathy,

    Excellent.  All's well that ends well.

    That is of the category "settings".

    If this happens again, you can fix it yourself:

    Right click on the sound icon in your taskbar > Open playback devices >

    Click / Select / highlight the speakers / HP > then "select default" to make it "stick" > OK

    Have fun with your new computer!

    Click on the thumbs-up Bravo !

    It's a nice way of saying 'Thank you' for help.

    While I strive to reflect best practices of HP, I do not work for HP.

  • No sound after updating the BIOS, no error mssg.

    my sound was working fine yesterday, had a mssg. This morning updated the BIOS and now it has nothing, using windows 7 mobile home on HP Pavilion g6, what happened

    Check the message asking you if someone is online to help the

  • No sound after updating Windows on HP Pavilion g6 8.1

    PC updated for Windows 8.1 today and now have no sound at all and the pc says without a helmet or the speakers are plugged and detection detects without problems and also the 'properties' of AMD say sevice work properly (I have no drivers back back to list)

    HP Pavilion Notebook PC g6

    Product C6M11EA #ABU number

    8.0.0.8807 driver version

    What can I do to get her back?

    Hello

    Try the following.

    Download IDT Audio Installer on the link below and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59620.exe

    One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

    When you are finished, turn off the laptop by pressing the SHIFT key when you click farm to temporarily prevent a hybrid boot.

    When the laptop stopped, disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

    Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

    Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

    Kind regards

    DP - K

Maybe you are looking for