When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file.

Similar Questions

• Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  Software installed but when I wanted to run it know my version of obsolete components DLLS are not compatible with this version of windows

  I installed programs:

  Software individual professor teaches Super Set

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package.

  Original title: I'm loading Quciktime.

  When I try to load Quicktime I get "Quicktime for Windows. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. "How to do this?

  Hi Tonyb13apb,

  ·         The issue is limited only during the installation of QuickTime?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Uninstall and reinstall QuickTime and check.

  http://support.Apple.com/kb/HT1925

   

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

   

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  a. click Start, select run.

  b. type msconfigand click OK.

  c. the system dialog Configuration utility appears.

  d. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  e. When prompted, click on restart to restart the computer.

  If the problem persists, you can contact Apple support for more help and information.

  http://support.Apple.com/kb/HE57

  Let us know if it helps.

• I have difficulties to show my creative cloud from my PC. When I login from another computer to office, it is fine. Cloud is not compatible with windows 8? Any ideas on what could be the problem?

  I have difficulties to show my creative cloud from my PC. When I login from another computer to office, it is fine. Cloud is not compatible with windows 8? Any ideas on what could be the problem?

  Hello

  Creative cloud is compatible with windows 8.

  Please follow the steps below:

  1. Uninstall CC program and features

  2. run cleaning CC tool: use of the Adobe Creative Cloud cleaning tool to solve installation problems

  3. install Creative Cloud again, download and install Adobe Creative Cloud applications

  Hope this helps

  Thank you

  Varun

• Maintenance message: Microsoft obsolete component DLL is not compatible with this version of windows.

  I found a message in my "maintenance" section that says.  Obsolete Microsoft component DLL is not compatible with this version of windows.  What - what it means and what I can do about it?

  Hello NancyMcKinzie,

  Please see the thread here because it made reference to the issue you describe:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/why-do-i-have-this-message-your-version-of/5e73c806-a4e1-44a1-8063-13cf83e9e4e6

  Let us know if it helps.

  Marilyn

• I've updated to 8.0 and now firefox will not open and I get an error message indicating that 7.0.1 is not compatible with version 8.0 of the Min and max version 8.0. What can I do now?

  I tried to uninstall 7.0.1 and reinstall only and still it would not to date and problems such as the loss of my favorites and have different toolbars and Add ons whenever I opened it. I lost so many bookmarks and it became so frustrating that I decided to try to upgrade to see if that could overcome the problems. And now I have this problem. When I did a search on my hard drive to see the components of firefox how was I found firefox files and documents in all directions and I was wondering if I should just delete everything related to firefox to clean all residual files which could be causing problems and then start a clean download , but I didn't want to delete files in windows and didn't know what I should delete and I have to leave. Can anyone help? I miss my firefox and the wish that I had never upgraded to 7.0.1.

  If you use ZoneAlarm Extreme Security then try turning off virtualization.

  • http://KB.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update

  See also:

  • [880050/questions/880050]

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.

• Error - Installer: wrapper. creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect when installing any program.

  Original title: there is an error then that inistalling some programs such as, java, internet download manager and...

  There is an error then that inistalling some programs such as, java, internet download manager and...

  for example, I want inistall an application or a program like Java, but when I start to inistall, it works like adminstere then said: (Installer: wrapper. creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect.)

  It even I mean to inistall Internet download manager and VLC...

  my pc is automatically updated and when updates are available whenever I download inistall,.

  Please help me, I love my windows Vista, tnx

  Hello Aliahriman,

  Please look at the post below and see if it will solve your "creatFile failed with error 123: the file name, directory name or volume label syntax is incorrect" question.
  He has helped others with a similar issue.
  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/3b180316-95c2-4613-8c38-8515481db22c

  If please reply back and let us know if this helps solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When trying to install Micro Cookbook 5.5 program get this message "this version is not compatible with the version of windows that you are running."

  Original title: MIcro Cookbook 5.5 install problems on Windows 7

  When I try to install a recipe program I get this message.  This version is not compatible with the version of windows that you are running.  Check the system information of computers to see if you need a x 86 (32 bit) or a or x 64 (64-bit) version of this software and then contact the editor.  I knew how to do this job of file transfer to the 32 bits of the 64 folder, but it won't let me install the program.  This software is no longer made.  The program is Micro Cookbook 5.5

  Do not transfer you files x 86 or x 64, that simply do not work and other issues.

  The program is designed for Windows 9, and if you have a version of win7 64 bit and the origonal is a 16-bit program, which she may very well, it will not install or run on 64-bit PC, so err msg you see.

  If the installation of the drive try this, locate the setup.exe, rt click & Select compatibility and select Windows 9 *.

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Error "this graphics driver is not compatible with this version of windows" when you try to install the graphics card

  Title: windows 7 Enterprise 64-bit

  I have hp Pavilion dv6 2138 ca for computer pc laptop and intel hd graphics and nvidia grahics on my windows 7 Home premium 64-bit, but after I've upgraded to windows 7 Enterprise and try to install the graphics driver nvidia. It is said

  the NVIDIA Setup program cannot continue and this graphics driver is not compatible with this version of windows.

  while I chose the latest graphics driver from the hp Web site.

  kindly tell me, that means the sentence above means and what programs and features must be changed in windows? or what steps should be taken to install nvidia graphics?

  answer me

  Thank you

  Hi Hamdullah,
   
  Welcome to the Microsoft community.
   
  "I understand from the description of the issue, you do not know the error' Nvidia graphics drivers are not compatible" when you try to install the drivers. I will definitely help you with this problem.
   
  (1) what is the model of the graphics card are you using?
   
  Method 1: If the NVIDIA GeForce GT 320 M graphics driver, I suggest you to download the Nvidia graphics drivers from the link and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100095-3&cc=us&DLC=en&LC=en&OS=4063&product=4125893&sw_lang =
   
  Method 2: If the problem persists, I suggest to select the graphics driver and check if you have any driver update available.
  http://www.nvidia.com/download/index.aspx?lang=en-us
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  I am trying to open samsung pc studio and it givesme an error message and windows then told me my flash drive is not compatible with my system... this after I downloaded the flash player im told is compatible with my system

  In general, when the desktop software uses Flash Player, it's because they're incorporating an Internet Explorer window in the application.  If you do not have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop app is not going to work.

  Then, launch Internet Explorer

  Go here: http://get.adobe.com/flashplayer/

  Follow the prompts and then relaunch the application after you have completed the installation in Internet Explorer.  I hope this sorts for you.

• I tried to install Firesheep and got an error message indicating that Firesheep is not compatible with Firefox 7.0.1 is true?

  is there anyway that Firesheep works with Firefox 7.0.1? The exact error message I received is lower in quotes.
  "Firesheep could not be installed because it is not compatible with Firefox 7.0.1.".

  http://codebutler.github.com/Firesheep/

  Versions of Firefox 4 + is not supported.

• Hi, I keep getting him morgane message following error cannot start firfox to all: box of error message as follows XULRunner error: platform version 1.9.2.4 is not compatible with minVersion > = 1.9.2.6 maxVersion

  Error: Platform version 1.9.2.4 is not compatible with minVersion > = 1.9.2.6 maxVersion = 1.9.2.6 maxVersion

  Eric, this can happen after an update has failed that partially changed your Firefox installation directory.

  Try a clean reinstall:

    1. Download the Firefox installer from Mozilla.com and save it to your desktop or other location.
    2. Make sure that Firefox is closed completely
    3. Delete the Firefox installation directory (On Windows, this is typically the C:\Program Files\Mozilla Firefox folder that contains "firefox.exe" and other Firefox program files and folders).
    4. Reinstall Firefox by running the installer you downloaded previously.
  

  Your personal settings, including bookmarks and history, will not be lost.

  See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall