When copying, Office Jet Pro 8600 unique Cyan vertical line
My Office Jet Pro 8600 all-in-One has a single vertical line cyan, middle of page when copying, either directly or from memory.
There is * no. * line when I "to clean the print head on the test page", but then the line returns when I copy.
Help, please! Thank you.
I understand that you get a vertical line when copying. I'm you a link to a troubleshooting assistance document. I would pay particular attention to the glass of the scanner in the third cleaning Solution. Let me know how it goes.
Tags: HP Printers
How can I get printer to stop putting lines down the page when I copy from the Scan or FAX? I went through all the steps recommended by HP and they have failed to solve my problem.
Just when I was ready to give up and call HP about sending printer for the interview, I discovered that HP had developed a Wisard able to look at my computer, find the problem and fix it. And it worked! Thank you HP.
I find it on my help screen how do I enlarge the print on a copy of an original document that I want to copy. I have Windows 7 on my computer and printer is HP Office Jet Pro 8600 wireless. I have a printer HP (3 in 1 officejet) before and it was much more user friendly. Is to use the online mode?
Here is a link to the user manual. To get the possibility to enlarge the copies, press this option on the display of the printer, then tap SETTINGS and then select resize, use the right arrow key to scroll through the sizing options on the printer. Changing the settings of copy is covered on page 59 and 60 in the manual. I hope this helps.
I have an Office Jet Pro 8600 and need to know if there is a way to fix the screen faded. You don't see the options like print, scan, fax, tools... It isn't that I know where they are and who's who for the most part.
In addition, scanning is not clear. Everything is faded. However, it still prints and faxes by a fine. I hope I don't have to buy a new All In One Printer. I finally got most of the glitches and tricks when I have a problem with it. Is it possible that there is a light bulb needs to be changed or something? I appreciate your help & feed back as soon as possible. I use in an office on a daily basis.
Welcome to the Forums of HP's Support.
I see that you have some problems with the copy and see the display on your Officejet 8600 e-all-in-one printer. I can help you with that.
To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once it is, while the printer is on, remove the power cable at the back of the printer for one minute.
If after the above, that you can't always see the screen or copy clear, the printer needs to be replaced because it has no replaceable bulbs in the scanner or the display. You can contact the HP Support by clicking here and filling out the form below to see what options are available.
Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.
My Office Jet Pro 8600 all = 0n - one did a terible grinding noice when pulling back a page for double-sided copying. Do I nbeed something oil?
Welcome to the HP Forums!
I noticed that your HP Officejet pro 8600 deploys a creaking, after the attempt to copy double-sided. I'm happy to discuss this issue for you!
"Try rolls of cleaning and the Firmware update by following the steps described in this guide, a ' paper ' or 'Pick motor stalled" Message appears and the printer is not Pick Up or animal....
If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!
Hope this helps and have a nice day!
Have used my scan function without problem since the purchase of machine and one year on Microsoft Windows 10. Last week I did some scans - now this week when I try to use my scan function I get the following error message: Scanner is busy. The scanner is currently in use. Wait until your previous task is completed, and then try to scan the image.
-There is no unfinished business and I can't find anywhere to clear the error or erase any task the scanner thinks he's working on. Has anyone met and solved this problem?
Thanks in advance for any help you can provide!
Thank you for using the HP forum. You can try the following:
Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
If this does not work, you need to maybe uninstall and reinstall the software COMPLETE features:
Please uninstall and reinstall the software COMPLETE features, follow these steps:
1. download and save the software COMPLETE features (do not install online)
Before you download, choose the right model, the operating system and complete software functionality.
2 uninstall the software from your computer
3. install the FULL feature software "saved".
Here are some resources for you scan:
Quick Guide for scanning needs
Hope that helps!
I had my Office Jet Pro 8600 more for a few months and have been scanning a pretty good volume without problems. Now, I have what I believe to be a their material. That's the problem. I'm getting random LARGE band (broad sense) about 1/2 to 3/4 inch of black, gray, or white streaks down the pages. I had the problem of cleaning so I cleaned everything, always there, but not every time. So I raised the lid and set the paper on the glass, guess what still there. So now I know that it is NOT a problem of cleaning. Switch papers, always there. Is not a problem of cleaning, not a charger problems, not paper I'm scanning. At this point, the only thing I can think is that some of the scanning light is on the fritz. It seems to do better after a rest and as I said it comes and goes. Any ideas anyone? I think that this could be a problem of default. Please let me know.
If the printer is to give you a black line when scanning/copying with the ADF and flat, then I would hazard a guess that the printer is connected to a surge protector. If so, then try the following steps.
* Unplug the printer while on
Disconnect the other end of the power cord from the surge protector
* Wait 60 seconds
* Plug the printer back to power on a direct outlet
The 8600 does not need to have a surge between her protector and the wall unit has protection against overvoltages, built in. Being doubled surge protection can sometimes cause this type of line to appear using the 8600. I hope this helps.
I get error that "additional software is necessary to continue' when I try to install the software and drivers for my wireless printer Office Jet Pro 8600. I just got a new laptop and had at first no parameter problem the printer and it prints fine, but now for some reason it is not print at all. I tried to restart my laptop and printer several times, but it keeps saying printer offline even if it is connected to my wireless. I followed the recommendation of an assignment that suggests to abolish the printer and reinstall, which is where I am now. Now, I can not install this printer at all by the above error message. Help, please!
When you try to install with the CD, try installing the latest Windows 7 driver from the HP website. Restart the computer, turn off the printer, then reboot your router and then launch the installation. Here is a direct link to the driver file:
Select the connection Wireless option during installation to get the printer on the network and associated with the laptop. Let me know if this helped at all...
I work on behalf of HP.
I am running Linux Ubuntu 12.04 LTS and have recently have not been able to print from it. My printer is the Office Jet Pro 8600, and on the first week I got it Setup print without problem. Now, I can only print from my iPad and when I try to print from my computer it says that it completed the work.
About your problem, I suggest you check if you receive the internet signal or uninstall and reinstall your HP printing software again. The reason of why I tell you to do these is because when you try to print wireless, then you know how much you receive signals. For example, if you do not receive the maximum amount of the signal, then the chances are that printing occurs slowly. Sometimes, you can also try to uninstall the printer software and reinstall it again. But before you do that, re - check that your internet connection is to give a signal properly. I prefer lets you choose a password that has a security code, so that you can receive the maximum signal, somewhat, rather than having several people use it. Thus, your internet will go slowly and your impression will slow down.
I hope this works!
Hi my name is Jack and I get an authentication problem when setting up my Android smartphone version 5.1 Lollipop printing to Office Jet Pro 8600 with the last service Plugin from Google HP play printing store
After two days of frustrating trying to get my Motorola Smartphone connect and print on my HP Officejet Pro 8600, I finally saw the light. He seems to think I didn't need to change my home network (SSID) as suggested by the consumer cell phone support to overcome the problem of authentication. Thinking as the phone OS was ANDROID 5.1, it is the necessary IP to it see the printer. My problem was that I kept entering my IP Phones ANDROID for it to see the printer instead of the IP to printers for the phone to connect to the printer. Once I realized that and I replaced the printer IP in the phone, Bingo, it worked 'awesome' with the print service plugin. I want to thank you for the suggestion to use HP Eprint app that I don't know who would have functioned as if I got the IP address in the configuration without the telephone.
Envelopes and labels can be printed using the paper on top of the Office Jet Pro 8600 more printer all-in-one?
If printing envelopes the lower tray, should I remove the paper from the tray and adjust the margns?
You are not able to print labels or envelopes of the ADF, for copying or scanning only. Also, it is not necessary to remove the regular printer paper to print on these types of media, even if it can make it a little easier. All you have to do is go to word or any other type of program allows you to print and select the appropriate model label or envelope and follow the instructions.
Let me know if you need additional assistance.
I have just purchsed the HP Office Jet Pro 8600 Plus and I wanted to print on legal size paper, but I can't figure out how to do this. Can anyone help?
There is a blue tab at the end of the paper tray. That push and the plateau extends to the legal size. Hope that helps. Now what about this one: I want to charge 11 "legal in Tray 1 and tray 2 and, hopefully, the printer will know what bin to shoot when you print legal documents?
HP Officejet Pro 8600 print/fax/scan/copy/web; Model: SNPRC-1101-01; FPU: CM749-64001; S/N: [redacted].
I use the operating system is Windows 7 on an AMD FX (tm) - 6100 Six Core CPU 3.3 GHz, 8 GB RAM, 64-bit operating system.
I've not seen this topic. I searched on the site of HP.
Description of the problem:
Just bought a HP Office Jet Pro 8600 printer. Time to install the software, but I had a Virgin software disk. What software should I download: drivers of course... what else?
Hello, welcome to the forums!
I saw your post about requiring the software and the driver for your Windows 7 system and your Officejet 8600. If you use the printer HP install wizard for Windows, which will search for the drivers and the software you need and will run the installation for you. You will not need all a disc.
I hope that helps! Response please that if you have problems, I will gladly help you!
HP Officejet Pro 8600 more black vertical line when copy or scan everything in the middle of the page
I understand that you have a 8600 Pro Officejet which puts a black vertical line in the center of your copies/scans. I'm sorry to hear you had to deal with this, but I will certainly do my best to help you solve this problem.
I recommend the rest of this document of vertical stripes, lines or streaks in the Copies, faxes or Scans as it should be in a position to help to cross that line. The most common cause is a small spot of something on the glass of the scanner, so just make sure that when you're cleaning use you as much elbow grease you can collect
Just to clarify a little further, if the problem only seems to occur when you use the automatic document feeder, you'll want to focus your attention on the small strip of glass that he uses on the left side. If it only occurs when you use the flat glass, you want to concentrate on the large piece of glass he uses.
Hope this helps, have a nice day!
With the help of a Microsoft Windows 10 w / a HP Office Jet Pro 8600. How can I get the printer to operate windows 10?
Please download the software package and the following driver and install on your computer (s) 10 of Windows:
Maybe you are looking for
I have firefox 5.0. Yahoo just upgraded it email this week. I'm not able to view any attachments / images in the messages that I received, but I am able to view them in IE 8 and Chrome 12.0.742.112. I deleted the cache and Add ons, but it has not sol
Hello I have a problem with my scores as I'd first on the laptop 2 apparent partitions on the HARD disk, labeled C:\Vista(Vista Home Premium) and E:\Data (57GB and respective 55GO). I decided to format vista because I had some problems with the FN ke
Fool fringe (me) in trouble: I have Outlook Express 6 operating on my computer. Is no longer, I can delete files. I am told "the selected messages could not be moved. An error has occurred. "Anyone out there can suggest what I do - please!
I need someone to tell me if my approach is correct. We have a Poweredge 2950 connected to an Powervault MD1000 with a bad location. We have an another Powervault MD1000 that we'll use to replace it. Since it is the same model table, what have we
I have an acer with windows 7 please help make it run faster, ive tried to remove programs, restore nothing helps