When I apply the criteria to view it doesn't work, but when I apply it through query it works. What is the problem with my approach?
Mr President
If I ask a condition through my option of criteria of view vo it doesn't.
The result is that it doesn't.
And if I apply a condition through my query vo option it works.
The result is ok as follows when I apply vc in query
What is the right way to create a vc.
Concerning
The first thing that seems unfair, is that I don't know what version of jdev you use.
If I ask a condition through my option of criteria of view vo it doesn't.
and the image below, I do not understand. I see a view Definition of criteria dialog box but not when you apply the criteria.
the third image shows the definition of criteria, but I don't see where you apply it to or source of dialogue.
Timo
Tags: Java
Similar Questions
-
I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.
and my phone
iPhone 6plus
You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.
-
Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.
The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).
The site identity button | How | Firefox help
Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:
Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help
-
I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB
I have sandisk cruzer blade USB key
Hi Rohit,
Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.
- You did it any significant hardware or change software on the computer before this problem?
- When do you get exactly the error message?
- Have you tried to connect to any other computer on this flash drives?
- Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
- Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?
The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.
Method 1:
Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.
- Hardware devices do not work or are not detected in Windows
- Diagnose and automatically fix the Windows USB problems
If method 1 does not work, try Method 2.
Method 2:
Remove and reinstall all USB controllers.
- Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the list of the categories of equipment, locate and expand Bus USB controllers.
- Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
- Restart the computer and let the USB controllers get reinstalled.
Plug in the removable USB device and test to make sure that the problem is solved.
If the problem persists, go to method 3.
Method 3:
This method will install the latest drivers from device to your USB device.
- Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
- Click find updates. When the scan finished, click optional review updates.
- Click the check box next to the update, and then click install updates.
- If you are prompted, read the license agreement, then click I agree.
- Follow the instructions on the screen to download and install updates.
- If you are prompted, restart your computer.
More information: Update a hardware driver that is not working properly
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
-
When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?
Hello
Thank you for writing to Microsoft Communities.
Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.
1. What is the full error message do you get?
2. are - that you be able to access or connect to the Internet via wired?
3 have there been recent changes to the computer before the show?
Please go ahead and follow the steps mentioned and later a update on the State of the question.
Method 1:
Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshootersMethod 2: If the problem persists, try to follow the steps from the link.
In the Windows wireless network connection problems:
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsCheck this link for more information:
How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-InternetPlease follow these recommended steps and post if you still experience the problem.
-
Vista Home premium
64 bit
HP pavilion dv4-1220us
It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed. I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.
RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.
DOWN MY BIOS AND THE ICON IS STILL THERE.
THIS SCANNER DRIVER AND THE ICON IS STILL THERE.
Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.
I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.
1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.
2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.
At the moment I'd hide so I does not uninstall my cd/dvd drive.
Do I need another hard drive?
Is this something with the Bios?
Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what? This is the site about the problem to apple and the site of heavy plant driver.
http://www.GearSoftware.com/support/drivers.php
http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes
http://support.Apple.com/kb/TS2308
Hi Mamalasting,
I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.
Reference:
Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hi allI have the problem with my language of keyboard, the fact is I can't add or remove languages from keyboardWhen I press the keyboard button change that nothing happens, but in the event viewer I get the following messageThe failing application name: Rundll32.exe_shell32.dll, version: 6.1.7600.16385, time stamp: 0x4a5bc9e0Name of the failed module: input.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdf4fException code: 0xc0000005Offset: 0 x 0000000000003756ID of the process failed: 0xf5cStart time of application vulnerabilities: 0x01cd697d57b60837The failing application path: C:\Windows\system32\Rundll32.exePath of the failing module: C:\Windows\system32\input.dllReport ID: 95fbd586-d570-11e1-8bfb-c860006d193aCan someone help me with this? or maybe there's another way to change the keyboard languages? for example through registry?Thanks in advanceI HAVE Windows 7 x 64
Hello
I suggest to create a new user account and check.
Create a user account.
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
If the problem does not occur in the new user account, I suggest you to fix a corrupted user profile.
Fix a corrupted user profile.
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
-
What is the problem with my Oracle reports parameter?
Hello
We use a PL SQL package that allows the user to select the report you want Oracle and associated parameters. While the control is passed to Oracle 11 g reports.
The requirement of one of the reports is to enable more detailed codes be selected by the user and then shown. The detailed code is an alphanumeric field that can hold between 4 and 6 characters.
If my data model looks like this
SELECT student_id
FROM my_view
WHERE detail_code IN :p_detail_code;
and the parameter that I'm passing to Oracle reports looks like this (when I view the source HTML code)
& p_detail_code =('1001','1002')
so no record is selected.
However, if my data model looks like this, I get the records you want:
SELECT student_id
FROM my_view
WHERE detail_code IN ('1001', '1002');
We have Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production.
Please tell me what is the problem with my setting. Thanks a lot for your help.
This isn't how you can use in. See this example on how to solve it with the digital settings. If your setting is a character, you need to change this.
In fact, when you simply enter 1,2,3 as an input parameter, you actually create this query:
Select *.
from my_table
where num_column in ("1,2,3")
Use rather a lexical parameter:
Select *.
from my_table
& p_where
In the parameter after relaxation shape, build the lexical like this:
:p_where := 'where num_column in ('||:p_param||')';
-
What is the problem with kernel_task?
Hello everyone,
What is the problem with kernel_task?
I explan: Macbook Pro early 2011 LION OS up to date.
I bought 8 GB on China supplier, CRUCIAL...
Well, I got a lot of kernel Panic. Usually, he is involved material, taken on my RAM, back is the original, so still have in the kernel_task to 300% CPU monitoring followed up to 500%...
Well, I went back to a clean install, a manufacturing one, with nothing.
Wish I 'd' diagnosis of the equipment, never went on, test it on safe mode, disable all extensions, then nothing:
Sometimes the kernel_task crazy sometimes not...
Good read a lot on the internet but nothing has worked... I went to the Apple store in DIJON, they do not have diag any hardware problem, and all my App are approved Apple.
Used to play the eve online thought, therefore, the graphic chipset pourrait was damaged, so when it's too 'hot' the mac gets crazy... but I expected crazy restarts and that sort of thing.
I bought a manual, there is no french support to the opening of Apple, but found nothing about my question.
So what?
I bought something conivient on Support and friability so today he's dead?
What should do?
If you still get the panic of the core, thanks to post separate 2 or 3 of the most recent as answers on this.
Reports of kernel panic: "/ Library/Logs/DiagnosticReports".
http://support.Apple.com/kb/ht2546>
http://support.Apple.com/en-us/HT200553>
The panic report should have "panic" in the name of the file.
Kernel panics tend to come from 2 sources
- Material:
- 3rd party RAM is the most common. Replace or return the original is usually the solution. Crucial and MacSales.com were 2 of the most reliable sellers for the initial quality and guest without question of replacement.
- Broken USB cables or USB devices have turned up as the 2nd most likely material number. Usually remove all USB devices, or replace the keyboard and USB mouse to see if it's one of those existing.
- There are a few Macs with graphics chips that have failed. I don't know that they exist, but do not know what model Mac had these chips.
- Software
- antivirus protection. It is the number 1 most panicked related software cause. More OS X does not need antivirus, because it has its own built-in protections http://www.thesafemac.com/mmg-builtin/>.
- Other core 3rd party extensions are a distant 2nd.
- NOTE: not all 3rd party kernel extensions are causing problems, but when there is a kernel panic, it's the first thing to look at.
If run kernel_task is often caused by core 3rd party extensions. It can be caused by an application program, but then the Applications-> Utilities-> Activity Monitor show "As" an application that consumes a lot of CPU, disk IO and network IO in collaboration with the kernel_task using lots of CPU. If there is no application burns the CPU at the same time, so it is almost always a 3rd special part of the kernel that was originally the use excessive CPU kernel_task.
Start in safe mode is usually a test to see if 3rd party extensions are part of the case. But in safe mode is not how you run your system, because it also loads less advanced graphics drivers and other components. Safe mode is very conservative, but it's a great way to see if the 3rd party software is at fault and have started when 3rd party software panic the system at boot.
The contributors to the forum long strongly warn against getting 3rd party anti-virus, cleaners Mac and additions increasing. This class of 3rd party additions have shown time and time again to really harm performance, remove things they shouldn't and cause a kernel panic. Especially right after an OS X update to a new version.
- Material:
-
What is the problem with Safari?
Since the last update of El Capitan, Safari has become almost worthless. I can't use it. It will give me the beach whirling death ball. I can not click through links. the full page is not displayed.
What the * is the problem with that? It's the kind of shit that I would wait in a Microsoft product. I had started using Chrome.
What the * wrong with Safari and when you're going to fix?
Try to reset the settings of Safari:
1. open Safari
2. click on the Safari menu at the top (to the right of the Apple logo)
3. Select the Preferences/Privacy tab
4. click on remove all data from the Web site
5. close Safari.
Remove cache Safari files:
1. click on finder
2. look for the menu GO to top
3. click on GO and hold down the option key. This will show a user library folder.
4. click library and find the Caches folder
5. in the folder caches com.apple.Safari Ouvrezledossier
6. move the Cache.db file Trash.
This should solve the problem. If it does not help, try to disable the Safari extensions
1. open Safari
2. click on the Safari menu at the top (to the right of the Apple logo)
3. Select Preferences
4. find the Extensions tab
5 disable all extensions of
6. relaunch Safari
-
Windows Installer package error
When installing iTunes I get a message error "there is a problem with this Windows Installer package. A program required for this install to complete could not run. "I downloaded Windows Installer 4.5, rebooted and tried again with the same results. How can I fix?
Hello
Important The Windows Installer Cleanup (MSICUU2.exe) utility that was previously referred to as in this article has been abandoned. Although the Windows Installer Cleanup utility solved a few problems installing, it sometimes damaged other components that have been installed on the computer. For this reason, the tool has been removed from the Microsoft Download Center. program install and uninstall problem solving
(http://support.microsoft.com/mats/Program_Install_and_Uninstall)is a replacement for this utility.
"The problems with programs that cannot be installed or uninstalled.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And see if this information helps you install iTunes:
"Not to install iTunes or QuickTime for Windows"
http://support.Apple.com/kb/HT1926
«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»
http://support.Apple.com/kb/HT1923
If the advice already given does not, please contact Apple for assistance.
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
The problem with Windows update - automatic updates service won't start not (error 126)
original title: the problem with Windows update
Please help me to get Windows Update operational return.
XP Media Center Edition, Version 2002, SP3
Had a problem with "Generic host process for Win32 has encountered a problem and needs to close." Follow-up of the instructions on this link:
http://support.Microsoft.com/kb/931852Seems to have cleared the error message. So far so good.
However, now a Windows Update does not work. Security Center Windows were told to go to control panel > system and use the Automatic Updates tab. But, if I go to control panel > system, the Automatic Updates tab does not appear.
I also went to the control panel > Services. Tried to start the automatic updates service. Received this error message: could not start the service automatic updates on Local computer. Error 126: The specified module could not be found
I already followed several instructions on this subject:
In the thread above, I was following the post on 30 August. According to Option A, I completed step 5 for the uninstallation of McAfee Security. At this time, my network card has stopped working. On the recommendation of the officer, I posted to the Malwarebytes forum. The officer determined Malwarebytes that I don't have a malicious software. I ended up posting on forum McAfee to get my network card works again. Then I reinstalled McAfee and start to run Windows Update.
I started with Option A, step 8 to reset Internet Explorer using http://support.microsoft.com/kb/923737. The difficulty it has worked very well.
Then Option A, step 9 says reset Windows Update using http://support.microsoft.com/kb/971058. When I ran the difficulty in default or aggressive mode, I got an error message saying: he cannot start wuauserv. The message asks me to verify that the user has privileges to take this step. Well, I checked through user accounts who am the only one user set up on this PC and I have administrator privileges. Help me please run this difficulty or recommend another way to get Windows Update works again.
[1]... looks like you are saying that my system is so wet that a clean install is the (only?) way to go.
[2] if I do a clean install, not only what I need to reinstall Windows and all my applications, I also have to reinstall the drivers... Etc. ?
[3] I think I have the disks supplied with the PC system. Is it better to use than to use the recovery partitiion?
[4A]... is there a possibility that some of [my data are] infected?
[4] preventing me from simply infect the whole PC again?
A1. Yes, and it was my recommendation in August, too.
A2. Yes.
A3. Only not really well using the restore Partition hidden to make the "destructive recovery" will include all drivers, etc., that have been installed at the factory.
A4a. Yes, a real possibility.
A4b. You run at least three 3 tests on the backup data before restoring one (1) with your installed & updated up-to-date anti-virus application (for example, Microsoft Security Essentials) and two 2 with good reputation, free online scans (e.g., ESET;) Bit Defender; Kaspersky; HouseCall; (F - Secure).
If you have saved your data on CD/DVD, the disc scanner. If you have backed up your data to a flash drive, SD card, or another external drive AND KB971029 is installed, analyze the drive.
If you have any questions or need additional help, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system
Once again, good luck!
-
..... It is not as easy as you think, either! I am not a novice, but I can't understand how to solve this problem! If I try to move the copy or rename them, Windows XP said 'Impossible. Access denied. Even the disk is not full or write protected and the file is not in use." Well NO, the hard disk is NOT write protected and far from complete. No other files in "My Documents", or if otherwise, give me problems. In addition, the files themselves are not protected in writing! They don't have ANY special attributes (IE. 'Read only' and 'Hidden' are NOT defined). Needless to say, I did not define all attributes on them myself, they are not in a shared folder, and I am the administrator of my own computer. When I restarted the computer the next day, it changes nothing! The problem with these particular files remained!
I was able to move, rename, or delete only with UNLOCKER. But it's not my problem. My problem is when I try to burn any program I use, burns keep in check the end and I keep losing DVD - R, one after the other! I understood the reason for the failures of engraving is because of this problem of reading / writing weird with the files! WINDOWS XP created this write protect it somehow, because he wasn't on the original files! However, this limited access status is invisible! There is no set special attributes on these files!
They are just media files, I downloaded, as well as text files (FIVE files different, slightly different formats, ALL from different sources!). They have been downloaded to FIVE different subfolders created in 'My Documents'. And it's not just the affected media files. It's all the files that are in the same folders (ie. txt, jpg) (even if I can at least open the jpg, while I can't read multimedia files). I've never had this problem with any other similar files downloaded in the same folder. These files are NOT protected by copyright, OR infected by viruses, AND I do not have the virus on my system. (I stopped Kaspersky, my virus program, but it made no difference. "So there was no lock file). Yet, I can play is no longer the files (so that I could before the etc..). VLC says "cannot open the file", WMP says similar. I created a new folder in My Documents, moved to the new folder with UNLOCKER, it made no difference! Same problem! Even using UNLOCKER to transfer them to the desktop, not in any folder in itself does not change a thing! Here is another beauty: software "UnlockIT" says "the file is not locked by any conducted! I have to be to imagine...
... This whole thing really made me realize how Microsoft Windows helps my carpal syndrome problem...
Hey PieterVO,
I've seen this in a few other threads before. Although I don't have a FixIt for you, I have a few discussions to look over.I would like you to try to take possession of the individual files that you work with and try again. I didn't see the error codes listed above, so if you get the error codes, please report it to their.See Kieron June 9 Post and post Stickywulf November 14 in the second thread I listed above.Give those a try and let us know the results. I hope this helps. Thank you! -
Error message indicating the problem with the monitor of devices in Windows XP.
Original title: Device Monitor
Error message indicating the problem with the monitor of devices in windows xp. How to fix?
Hello
1. when exactly you receive this error message?
2. What is the brand and model of your computer?
3. What is the exact error message that you receive?
Please provide us with more information about the issue so that we can provide you with the necessary assistance.
-
Always the problem with e-mail after trying to repair it with uninstall
When I try to delete e-mails, it is said: msg store was damaged by an external application to windows mail. Windows mail at recovered. error 0 x 0000000.
I delete the emails and they do not appear in my file delete so I can remove them permanently. When I opened my email each day the same messages deleted come thru with exactly the same day as before and as a new email. I have the border in Arizona as my provider. I followed the instructions of a similar problem, I was alerted by going to programs, uninstall, repair, but no luck, same thing back on email. I get emails with the date of the day on them, so I'm able to send and receive. Exactly what remove file showing nothing as deleted, and when I click on an e-mail I deleted it says that it does not. I use the computer for email and internet, that's all. My computer is a windows vista Basic. Thanks for any further help.
Hello
You use Norton or McAfee av? I suggest to uninstall these and select free software such as Microsoft Security Essentials, Avast or AVG. These work properly with Windows Mail.
How to fix most of the problems with Windows Mail
http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html
Alternatively, you can consider the use of the Windows Live Essentials Mail instead of Windows Mail application.
Maybe you are looking for
-
Points of unexplained coercion
I'm dealing with several problems of odd conversion point. First of all, if I create a control (say a Boolean) and then create a reference, and then create a refnum of the reference, I get no point of conversion. But if I select a refnum in the palet
-
June 11 automatic check for the updates ran and said 15 updates are available, up-to-date and insalled, following restart, section to update the system in red and said that no update was already installed! Computer over 2 years and the system is conf
-
can not connect password and username on.forgot
can not connect password and username on.forgot
-
I'm stuck in the box of / address of the fax server in the Windows Fax and scanning configuration wizard. Where can I get this information? I think I can finish with this info.
-
Lock my PC on the network, the programs still show in the background.
normally, when you press ctrl alt del enter, your PC is locked and shows just the wallpaper and the security box telling you its coastline. When I lock a PC it shows all programs, I still running. Help!