When I change the XP screen resolution I use to be prompted with a box asking if I wanted to keep the new settings and a countdown.

Now when I change the resolution I don't get this box.  If I choose the wrong resolution of my monitor I get a blank screen and cannot return to the old resolution.  How can I fix so that I return to the resolution of old timer appears automatically again?

Hello

You can use the system restore feature to restore the computer to a State when you were having any problems.

Try system Restore and check if this is useful to resolve the issue.

How to restore Windows XP to a previous state

http://support.Microsoft.com/kb/306084

Tags: Windows

Similar Questions

  • Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

    Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
    If someone has the original settings, I would be grateful for any help.

    Derek has soon

    Hello Derek

    Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.

  • My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

    My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

    Time Machine backup to a sparsebundle.

    The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

    Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

    You has of course set the exclusion in Time Machine?

    By default, Time Machine will exclude your second drive unless you have included it. Did you?

    Once you get to this level during the backup, you can do a full restore manually whenever you want.

  • Can I change the new memory and at the same time to replace the Rams?

    Can I change the new memory and at the same time to replace the Rams?

    If a MacBook Pro RAM and drvie hard can be modified/improved depends on the submodel and we do not know yours. There are dozens of variations of the MacBook Pro issued since 2006, and you do not want guessing us!

    Please do "about this Mac" in your Apple menu to get this:

    Notice the line that I have highlighted with the red arrow. Please tell us what your computer has in the thr same place. However, do not post any serial number.

    With the exact submodel we can better advise you of any available upgrade paths.

  • Change the new tab and connect to red target icon bright or other high-visibility

    The visibility of the "New Tab" and the sign is very low. That's why I always leave my e-mail homepage to navigate, find or load a bookmark. If the new tab and sign is customizable, I might make it more visible so that I would be called back to click to a new page.

    Thank you!

    The new tab button is customizable and can be moved to another toolbar or position on the tabs in mode toolbar Customize.
    It then becomes a toolbar button that looks different that may look better.
    You can also try to find a theme with a button tab more distinct.

    Classic toolbar buttons:

  • Help - I've changed the DHCP settings and cut me my router!

    In my lame attempt to improve the security on my router (WRT54GS), I changed the authorized number of users from 50 to 4 DHCP.  As soon as I clicked 'Save Settings' systematically, I have disabled access to all computers in the home router, and now I can even get into the router to restore.  GRR!  Until I touch anything else, I wanted to tender hand for help.  Anyone?

    Hmmm, well, if I had to guess I bet that you did not press and hold the reset button in the back for at least 30 seconds, and then turn on the cycle of the router.  A brief press of the button will not perform a hard reset.  So, how do you "reset").

    Wireless security can be found here.  Choose what level you want.  Glad you got it going.

  • How can I change the network settings and air play setting up the itunes which is running on my laptop (windows 10)

    A few weeks ago, I was streaming of photos to my TV using my apple TV. Now, whenever I try to play music in my laptop itunes I get the error message "the airplay APPLETV device is not available," he goes on to say "Please check your airtime... configuration and network settings. "I searched for days for these parameters.

    Now the itunes on my laptop has no audio data.

    The only way I can hear the track I'm playing, is to select the option at the foot of the error message that says "use this computer for now" - this gets quite annoying after awhile!

    any suggestions?

    Thank you.

    Hello [email protected],

    I understand that you encounter some problems with the sound settings on your PC after using a home since iTunes for Windows sharing.   The resources below has some basic for home sharing troubleshooting. Specifically, I would say the software updates, cycling the power to the modem/router and check the sound settings in Control Panel to do the internal speakers are of course selected.

    Get help with sharing at home

    Where is the control panel?

    Take care.

  • SKYPE CANNOT CONNECT EVEN IF I CHANGED THE PORT SETTINGS AND THE SETTINGS OF THE FIREWALL

    Hello community!

    I have a problem with the Skype program. As I said in the title I can not connect (error: unable to connect Skype) even though I followed all the steps to allow Skype to my firewall and allow ports connect. This is the latest version and I have installed, uninstalled and reinstalled for more than 10 times. I don't know what to do anymore.

    Thanks in advance for your attention to this issue.

    (Latest version of Skype works on Windows 7)

    6.11 is an older version of Skype. All Skype versions prior to 6.14 are now retired, which means you can't use your version 6.11. The currently latest version of Skype is 6.20. You must update your Skype.

    http://www.Skype.com/en/download-Skype/

  • Change the default settings for all Mac on a wireless network, Officejet 6500n, Lion 10.7.4

    Hello

    In my view, there are a lot of discussions on change the print settings by default for printers hp in Leo, but my question is a little different. I have a network running on a wireless Netgear N600 router, and my HP Officejet 6500 is directly connected via USB. I want to set up the printer so that anyone who connects to the network via a mac wireless has the default value depending on parameters in any printing application:

    1. Quality: Fastdraft
    2. Color: gray
    3. Black cartridge only
    4. Print on both sides: long edge binding

    When I go to the page of the printer by entering the IP address in my browser, the administration utilities do not allow me to change the default settings and change the default settings in CUPS is useless since applications such as Safari, Word, and preview override these settings.

    Is that what I want possible?

    Thanks in advance.

    We gladly invite you.

    Indeed, that is right. When printing from a computer, the print settings can only be configured on the computer.

    The unit only will allow us to change this type of parameters for the work only stend, carried out from the device (e.g. copy or printing of the device using a memory card).

    Some business models can provide options to force parameters, print, but I'm afraid these capacities are not intended for consumer products.

    Kind regards

    Shlomi

  • Change the language settings on hp envy 121 from Japanese to English

    American expat living in Tokyo and I just bough the HP Envy 121 to Apple, store and said I would be able to change the language settings and maybe I can but it's all in Japanese. Anyone can guide me please through the command prompt to change the language settings? I turned it on and the menu screen with the key etc but need help to decipher how to change the language settings. Thank you!

    Finally played with enough buttons and SETTING ENGLISH FOUND! Phew... now off to study Japanese!

  • I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I ha

    I'm on Windows 10. A works fine until the update. How can I make Adobe Acrobat Reader (free verision) my default DC? Seems that the default value is E pdf and when I change the default in the flashes of screen reader and forms are in the same format. I rather Acrobat format if possible. Thank you

    Hello

    Could a right click on the PDF file > open with > choose program by default and select CD player as default PDF Viewer.

    You can do it from the control panel as well.

    This would make CD player as default PDF Viewer.

    Concerning

    Sukrit diallo

  • When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

    When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

    You may have a corrupted file xulstore.json .
    https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

  • Change the import settings when the Tag window is disabled

    Hello

    When changing the parameters to import by mistake, I chose only not to ask for the name of tag in import.

    Now, I want to change the import settings. Now, when I click on import Image and videos I'm never able to see the screen of tag I can change the settings to import again. It begins to import images and videos very quickly and not giving the time similarly hit the import settings.

    Any help would be appreciated.

    Thank you


    I found a solution that worked for me!

    My problem was when I tried to change the import settings after inserting my memory of cameras
    stick. It offering me the opportunity to go to import the settings. If I could change the location
    imported illustrations...

    After scanning a document to save (nothing to do with) image + video import dialogue box shows
    To the top! And does not immediately start importing, so I was able to click on the import settings and get
    the dialog box import settings.

    I clicked on the parameter area for the scanner and I get a choice of devices to change the settings of.
    Cameras and portable is here. !! By clicking on that gives me the window I can ck the __Prompt of the box for a tag on import.
    I do this press 'OK '.

    Then I get a box of photos and videos to import saying for these changes to take effect, import pictures and
    videos will now be restarted. Click on 'OK' to find
    Scanner: Operation is not successful the device is not ready. I click 'OK' on this box

    After that, I will go back to load pictures from my camera memory stick and import of images + videos box
    remains on the screen, so I'm able to get import settings.

    I hope this works for you... I tried to solve this problem for weeks.
    (Meaning 3 days after I got my new computer windows7)
    with no help from chat for hours with HP support and many requests for help from microsoft answers.

    Hope that gives you the answers you need... I would like to know if this is the case?

    Wes

  • Sqldev 4.0.2: When I change the package body, down to show me "calculation... bread crumbs for body" in infinitive loop until I get out.

    When I change the package body, down to show me ' calculation of breadcrumbs to... body "in infinitive loop until I get out.

    On
    —–

    Oracle SQL Developer 4.0.2.15
    Version 4.0.2.15
    Build 15.21

    The IDE version: 12.1.3.2.41.140418.1111
    Product ID: oracle.sqldeveloper
    Product version: 12.2.0.15.21

    Version
    ——-

    Version of the component
    ========= =======
    Oracle IDE 4.0.2.15.21
    Java (TM) Platform 1.7.0_65
    Support versioning 4.0.2.15.21

    Thanks for the update. I pass the developer and I hope he finds that they are useful.

    A preliminary analysis shows some problems of Java:

    1. report of the discharge of the thread Analyzer is a little misleading because of https://bugs.openjdk.java.net/browse/JDK-8036823

    2 possible endless loop in the ScaledBlit routine on the thread main event: https://bugs.openjdk.java.net/browse/JDK-8028539

    Question 2 currently has no resolution, but there are a few (a potential solution?) fix for jdk1.8.0_40 (8u40).  The latest official version is 8u11.

    Assuming that the number 2 is the culprit on Ubuntu, just like on Windows, then 1st edition probably does not concern us. Just for reference, a backport of the Java correction for the 1st edition exists on jdk 1.7 and 1.8, but has yet to be officially released on either.

    Kind regards
    Gary

  • When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix i

    When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix it?

    You set the font size to a size that is suitable for the size of the document.   Size of the document may vary everywhere.   To resolve this problem in action, I solved in scaling the document to a known size then use a font suitable for a document of this size.  When you resize an image using size with resample Images not only checked a single pixel is change everything that is changed is the DPI image resolution setting.  So if you size a picture 8 "wide you choose a font size is good for wide image 8" the Save action.  To work around the problem of changing the size of the printing I wrote a Script to use in such an action.  The script is used twice, there is a backup and restore script.   The first time that the script is used the script records the resolution DPI images in the metadata documents.  The second time that the script is executed, it retrieves the registered PID parameter deletes the record of metadata from images and set the DPI images that had been saved.    If the use of fonts for the document 8 "will be resized to fit the print original size.

    In a script, you can calculate a correct font size to use.  Actions cannot retrieve information or use logic. They need to use the Plug-ing and Script where logic is needed.  When you make using Photoshop UI you use your eyes and brain.

    Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
    Contains

    Example of
    Download

Maybe you are looking for

  • Replace asterisks around words in italics?

    I created a rather long novel by using markdown and wants to open the text in pages (and possibly author iBooks). After trouble with paragraph breaks, my simple solution was to export the markdown to plan the text so far. However, all the words I for

  • iPhoto 9.4 crash how to fix?

    MacBook air OS x 10.8.6 iPhoto 9.6.4 iPhoto keeps crashing when I try to open it, it says repairing when this is done, he's trying to to open and then crashes again. How - what is corrected thanks Pippip

  • Why my calculation at the time loop repeats only once?

    I have a series of simple calculations (multiply, divide, add, subtract) occurring in a while loop based on input data on the front panel of the user. The results are then connected to local variables that alter the parameters of a signal generator i

  • need to cut pc where it is plugged it said pc saving settings and then that is it does not stop on its own

    PC does not close down on its own necessary to use the band switch am new to all this what happened?

  • Folder open automatically at startup

    My Dell desktop computer uses Windows XP with SP3. At startup, the "C:\Program Files" folder opens automatically for about two weeks. I could not, so far, to cancel this action. Almost all the files in this folder are files ".dll" of Real Networks, I