When I check IMIE it shows another I phone

Similar Questions

• Properties on my records show that about 25 GB, but when I check the properties on the disk C it says I have 103 GB

  Properties on my records show that about 25 GB, but when I check the properties on the disk C it says I have 103 GB. Are these files was hiding all? and how do I know if I can delete them or when they are?

  My computer is running out of disk space, and I want to delete some files, so the computer longer smooth but I can not find about 80 GB which is supposed to be on my computer.

  Very likely. This includes your Hibernate file, if there is one, your pagefile, and (I think) the Restore Points.

  You have a single hard drive? If so, how much is spread over it? If only a C: partition, how big is it and how much space you have?

  Deleting files (unless the hard drive is almost completely filled) won't help your performance. After the back if you need advice.

• When a box is checked, insert text in another field

  Hello

  I know there has been a lot of another thread like this one, but for some reason that my code does not work.  I try to have text in a field when a check box is selected.  Can you please please help.

  For a mouse an event:

  var dateCheckbox = this.getField ("Date or");  checkbox

  var detailField = this.getField ("expiry details");  field

  If the "date or" is checked that change details of Expiration 'Hello '.

  If (dateCheckbox.value == 'Yes') {}

  detailField.value = "Hello";

  }

  Which mouse-up event do you use? In general, when you try to trigger something based on a selection of the checkbox, you should also take care of the disabled value. In addition, the value of exports of a checkbox control can be changed, is usually a better approach to check the value! = 'Off', because 'Off' will always be used if not controlled.

  Try the following as the event of mouse-to the top of the "Date or" check box:

  var detailField = this.getField("Expiration Detail");  //field
  if (event.target.value != "Off") {
      detailField.value = "Hello";
  }
  else {
      detailField.value = "";
  }
  

• When I check my internet speed on mobile, it doesn't show any flash drive. What should do?

  When I check through speedtest.net internet speed statistics it shows properly on the laptop. But when I do the same thing for my cell phone, it doesn't quite work. In fact, it does not at all. My cell phone is capable of running games flash and access other sites like Neeraj Kulkarni blog and Yahoo which require flash player to run correctly. What is the reason? Help, please.

  Hello

  Flash Player is not supported on mobile devices (Android, Blackberry, iOS, Windows Phone).  See Adobe Flash Player | Technical for supported operating systems and browsers.

  If speedtest.net requires Flash Player then he's not going to work.  It is possible that other sites you mention have deployed solutions for Flash Player on mobile.

  --

  Maria

• Using Windows 7 and LR 5 when I look at the list of keywords a keyword has 7 photos but when I check the library with this 350 photos filter keywords appear which includes 7 photos that have the keyword.  Why the showi filter library

  The use of Windows 7 and LR 5, when I look at the list of keywords a keyword has 7 photos but when I check the library with this 350 photos filter keywords appear which includes 7 photos that have the keyword.  Why the library filter, showing images that do not match the query

  John,

  Thank you very much for the work you've put into this.  I made the change you suggested making the subkeywords under 'schwartz' to be {name schwartz}.  I don't know who has contributed something, but I think that there are more immediate problem which is mucked up.  As well as the fact that I have several catalogs that I don't know how they were created, I think that the best thing would be to merge all the catalogs into one (it is better to have a single catalog, right?) and delete all the keywords from scratch.

  Thanks for your help.  I'll mark this as resolved issue.

  Dan

• This morning when I started Firefox it shows my home page as screwed up as yesterday but Safari has shown as it should look like, what is wrong?

  I currently use version 3.6.24 Firefox on my PPC mac with 10.4.11 system. I use Firefox for many years without any problems. I received yesterday and on my screen to alert that there is a new update of Firefox available at the facility. I clicked on OK and the update started. When it's over, I checked and it's the same version, 3.6.24, I used and apparently nothing has changed until I went to my eBay site. Once on my site, I signed in and went to manage my Articles page. The page was different because normally it shows all the items, I have for sale and at the top of the list of points of sale are the three items to check and look at my listings, which I look at you, my profile and my alerts. When you click on one of them you are normally taken to another page. When I went there after apparent installation of the updated release of Firefox page showed my ads in a single column, my profile in another column and third column for my alerts all on one page. This is not normal. I got out and went to my home page which is http://www.rr.com/. Now it was different. Parts of the site have disappeared, the sections with the weather, news, and reviews. I thought it might be the site and then I launched Safari and went to the same page and it is normal. This morning when I started Firefox it shows my home page as screwed up as yesterday. Safari has shown as it should look like. I then started SeaMonkey and it showed the page as it should look like. I really like Firefox and I'd like to get it working again as it should. Would appreciate any suggestions. My email address is [email protected]

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox > Preferences > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• When you try to check my e-mail acct sync, I get an error message that the URL is not valid. When I check the link, everything that comes is http / / and nothing el

  When I check the link all that shows is http / / and nothing else. She does several times. I use Outlook for Windows 8.1. I have not tried the links embedded to see if this is a universal or just isolated problem to this email in particular.

  You can follow the discussion in the bug.

  • bug 1003082 - check/verification link broken in emails for confirming registration accountant Firefox sync if reading mail in Outlook

  Please, do not comment in bug reports
  https://Bugzilla.Mozilla.org/page.cgi?id=etiquette.html

• When firefox load it also load another tab for the search engine. How can I remove this where it will load only my start page?

  When firefox load it also load another tab for the search engine. How can I remove this where it will load only my start page?

  You can check the setting of the home page and make sure that it doesn't have a leak ' |'.

  Firefox supports several home pages separated by ' |' symbol.

  • Tools > Options > general > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

• I'm in firefox on my mac and make 19.0 a message which is is not the latest version, but when I check there is no upgrade

  I upgraded to 19.0. There is no upgrade to firefox 19.0 when I check, but when I open firefox, it says: I'm not using the latest version.

  You can check the setting of the home page.

  • Firefox > Preferences > General > startup: Homepage

  See the following for a few suggestions:

  • https://support.Mozilla.org/KB/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
  • https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports several home pages separated by ' |' symbol

• After I install my laptop bootcamp has restarted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked the scores he had only a mac partition

  After installing bootcamp my laptop has rebooted and said there was a problem and restart your laptop then I check my memory of the laptop and my mac 210 GB is 180 GB and when I checked partitions there was only a mac partition and I can't get back the deleted memory

  Post a screenshot of what shows utility disk to disk

  How to take a screenshot on your Mac - Apple Support

  OSX works OK?

• My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

  Reinstall OS X from scratch and add more RAM.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Things you can do to solve the slow Downs

  If your computer seems to run slower, here are some things you can do:

  Start with tours: OS X maintenance - MacAttorney;

  The X Lab: the X-frequently asked questions.

  " Safe mac" Mac Performance Guide;

  " Safe mac" the myth of the dirty Mac;

  Maintenance fast Mac Help.

  Start in Safe Mode , and then repair your hard disk and permissions:

  Fix the hard disk and permissions before Lion

  Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

  Repair the hard drive - Lion-Lion/mountain/Mavericks

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

  When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

  Restart your computer normally and see if it helped at all. Then do little maintenance:

  For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

  Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

  Suggestions for OS X maintenance

  OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

  OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

  Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

  Useful links about malware Protection

  "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

  Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

  The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

  Difficulty a few pop ups browser that supported Safari

  Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

  Quit Safari

  Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

  Relaunch Safari

  If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

  It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  An excellent link to read is Tom Reed Mac Guide of malicious programs.

  Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

  Check out these articles from Apple:

  Mac OS X Snow Leopard and malware detection

  OS X Lion-Protect your Mac against malicious software

  OS X Lion mountain - protect your Mac against malicious software

  OS X Mavericks-Protect your Mac against malicious software

  On the quarantine of file under OS X

  If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

  The user Joe Bailey comes this equally useful advice:

  The facts are:

  1. There is no anti-malware software can detect 100% of malware out there.

  2. There is no anti-malware that can detect all targeting the Mac.

  3. the best way to prevent breaches the most is for you as the user is aware that

  the most successful malware attacks rely on sophisticated social engineering

  techniques preying on human greed, * and fear.

  4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

  your computer is designed to trick you into installing their malware thinking it's a

  protection against malware.

  5. some of the anti-malware market products are worse than malware

  go where they are supposed to protect you.

  6. be careful where you go on the internet.

  7. don't download anything from sites, you know are safe.

  8 avoid links that you receive in email, always be wary, even if you get something

  you think a friend is, but that you did not expect.

  9. If there is any question in your mind, then assume that it is malware.

  Troubleshooting Applications

  I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

  If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

  Basic backup

  For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

  1. a panel of Time Machine preferences as part of the system of preferences;

  2. a request for Time Machine, located in the Applications folder. It's

  used to manage backups and restore backups. Time Machine

  requires a backup drive that is at least twice the capacity of the

  drive being backed up.

  You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

  1 Carbon Copy clone

  2. get backup

  3 already seen

  4 superDuper!

  5. Synk Pro

  6. Tri-Backup

  Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

  Referenced software can be found at MacUpdate .

  Additional tips

  Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

  Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

  Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

  Check for applications that may be hogging the CPU:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• I got the auto update on but when it was over Secunia showed that kb2585542 was missing. I tried all the suggestions given by Microsoft but am unable to open this file.

  Original title: update problems

  I got the auto update on but when it was over Secunia showed that kb2585542 was missing.  I tried all the suggestions given by Microsoft but am unable to open this file.

  Hello

  1 have. the troubleshooting steps you tried to solve the problem?

  You try to install the update (KB2585542) manually and check if updates installed.

  Update security for Windows XP x 64 Edition (KB2585542)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28625

  In case you have 64-bit Windows XP operating system installed on the computer you can download the update manually the link provided below.

  Update security for Windows XP x 64 Edition (KB2585542)

  http://www.Microsoft.com/download/en/details.aspx?ID=28590

  See also:

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

• I have the creative cloud (Photoshop and Lightroom) in my computer, but I had a problem of invoice, and because of that, I had to do, the association again change the registered credit card. But when I click to download shows error 82. How can I fix it

  I have the creative cloud (Photoshop and Lightroom) in my computer, but I had a problem of invoice, and because of that, I had to do, the association again change the registered credit card. But when I click to download shows error 82. How can I fix it?

  check your account and confirm your adobe, Adobe ID id

  log out and then back to your office to cc using the same adobe id allowing you to check your subscription is current, https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

• FRM-92101 happens when I open one form from another and then close it.

  FRM-92101 happens when I open one form from another, check something, display a message to the user and exit the screen to the previous shape.
  
  Version of forms: 10.1.2.0.2. Java: 1.6.0_23. Browser: IE6
  
  When I put forward two messages of 'EXIT_FORM', all right and the second form is closed again to the first shape just like I wanted.
  In 9.0 forms, it did not.
  
  It has to do with the fact that I use JRE instead of JInitiator?
  Thank you.

  Take a look by using the built-in NAME_IN forms. You will find the NAME_IN function takes a STRING as parameter. Change your code to:

  IF NAME_IN('SYSTEM.CURSOR_ITEM') IS NOT NULL THEN
     SYNCHRONIZE;
  END IF;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.