When I click on Windows Update, he says that he cannot work and maybe I have to restart the computer.
Hi, when I click on Windows Update it says that he cannot work and maybe I have to restart the computer. But when I do it always appears with the same. In services, it is configured to automatically update windows and is started. Can anyone help?
Hello
Method 1:
You can run the fixit. Check out the following link.
The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/
You can run the fix provided in the link and check out them.
Resolve security issues to protect and secure Windows automatically
http://support.Microsoft.com/mats/windows_security_diagnostic/
You can read the following article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Note: if bad sectors are found by running the check disk utility and if the attempt to recover bad sectors is verified when checking the disk for errors, data in the bad sector might be lost in the attempt to recover bad sectors.
I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: when running Scan disk hard if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost.
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
Updates: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions
Tags: Windows
Similar Questions
-
Hello
Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing.
Zone Alarm has a key valid license - but for some strange reason, he will not have, so I had to uninstall and reinstall ZoneAlarm - he tells me that I need this update - who will not come?
Note: Windows Firewall is turned on right now and when I look at 'exceptions' does not offer updates of windows as part of the selection list.
Please, any advice on this will be greatly appreciated.
Alan
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
You will receive the best help here.
See you soon.
Mick Murphy - Microsoft partner
-
I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, please.
Safari maxes in a version of Mac OS x. New version of Mac OS x would be needed for the new version of Safari.
Firefox is not limited within an OSX and probably has a version that works. Chrome may as well but is a Devourer of resources. Opera is a third option.
-
Window media player saying error not install proplerly and must be reinstalled both on the low loading page do not work 7n and 7 k how can I reinstall WMP on win 7 home premiun?
Is - this Windows 7 32-bit or 64-bit edition?
Open the Start Menu, go to all programs - Accessories , right-click on command prompt and select run as administrator . At the command prompt, type the following command:
sfc/scannow
and press ENTER. Let it run until it ends. If it finds no problems, and if so, is he able to correct? That you still get the error then?
Tim Baets
http://www.BM-productions.TK -
When my monitor goes to sleep I can't wake him up by clicking on the mouse. I have to restart the computer to be able to see the screen. I tried all turned on and on the screen but when I do it says monitor going to sleep
I assume you are using a desktop computer you are referring to the monitor going to sleep rather than the course of PC to sleep.
1 check the monitor power management & the display adapter in Control Panel, Manager of peripheral and during that control you the mouse power management and make sure that it is likely to be used for anything wake up.
2 in case of failure, then check the monitor & display settings of the adapter to control panel, display.
3 check manual site or the monitor stand, so the settings recommended.
4 then check the settings of the Control Panel, power options, change plan settings change advanced power settings. In particular, if it is a USB mouse, you may disable settings settings USB, USB selective suspend setting.
-
My hotmail account is playing up - suggestions pls for the following scenario. I try to send an email I get a message at the top of the screen actually say that Hotmail cannot process and suggesting I check my internet connection. I check the connection and everything is ok. I'm trying to move from one folder to another and sometimees I get the same message. I delete the 'old' content and it reappears in the folder. Everything is very confused. Any suggestions please?
Please try the Hotmail Forum http://windowslivehelp.com/forums.aspx.
-
I have fixed everything at the time of my desktop computer starts up to a screen black with no explorer.exe running (the explorer.exe running only showed a folder at a time, until I restarted it.) and now I have a connection problem.
My netgear router has a connection with my computer, it shows green in the taskbar. However, my actual connection to the internet is not as lucky as the connection with the router.
I see the networks that I am able to connect to, but as soon as I did, I said that I am not currently connected to any network. If I go to "Connect to a network" I see clearly that I'm "connected with limited access" to Snet-G, which is one of the networks available to connect.
In my options of netgear, I am also connected to Snet-G, and it shows that it is actually connected.
My problem is the fact that I can "ipconfig" and I find none of my information, and when I try to ipconfig/all, it gives me an error something while not connected, so it says that I'm connected and does not, at the same time. My local internet does not work (can not navigate to 192.168.1.1 and others), and of course for this reason, my global internet does not work.
I need a fix for this, because I just put a ton of subscriptions for this month, which are already paid, and if I can't use this month is a good slice of $50 trash just because I fixed something.
Thanks, that's a well advanced topic.
I tried the following:
System Restore (6 days back, the problem started 2 days ago)
Restarting the computer
Unplug modem (30 seconds)
Restarting the router/Reset
Connection to the Snet-N instead of the Snet-GThings to take note, if you do not already consider: I can't connect to my router config (192.168.1.1), my computer says I am connected locally, but not in the world.I have some information about the modem if necessary.-I have restored my computer 6 days ago, but only changed my problem with explorer.exe back. Internet broke again-. -.Hello
Method 1:
I suggest you to follow the links and check out them.
Windows wireless and wired network connection problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
The problems of Internet connection
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Method 2:
I also suggest that you see the link and search for connected with limited access
Message when a device on a Windows Vista-based computer uses a network bridge to access the network: "connected with limited access".
-
When I clip media player goes full-screen cursor disapeers that I then have to restart the pc to return
Hi KenHannam,
· What version of the operating system is installed on the computer?
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Run the windows media player settings Troubleshooter.
Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.
-
I am unable to open Windows Update Express option, when you click on Express, I get a message saying that "files required to use windows update are longer registered or installed on your computer." I tried both options following the message, with no luck at all. Belarc says that the 125 Microsoft updates are missing. I have Windows XP Home Edition sp2 disk. Suggestions, please.
If xp is always saved, then try to open the internet options settings,
view of objects, search for & R.click on the WU & MU active x objects
(one at a time), select "update", they are part of windows update
Active x, necessary for updates... Express update could be among them
Moreover, however it is not a part of windows...
-
Nothing happens when you click on Windows update
Original title: Windows update error
When I'm clicking windows update his does not.
Emeline
The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.
Download page main for KB3168965 for all windows,
https://TechNet.Microsoft.com/library/security/MS16-090
Win - 7 32-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=53187
Win - 7 64-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=53209
Then manually install it,
Customer of June included in this update rollup, update
Download page main for KB3161608 for all windows,
https://support.Microsoft.com/en-us/KB/3161608
Win-7 32-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976
Win-7 64-bit
https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974
After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.
-
I have loaded activeX on, but when I go to automatic updates in automatic mode it says I must load activeX?
How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058 TaurArian [MVP] 2005-2010 - Update Services -
Cannot update Windows Vista, with the update functionality.
Hey Charley,
Welcome to the Microsoft Community and thanks for posting the question.
According to the description, you can not install Windows updates.
This problem can occur because of inconsistencies in Windows Update.
Perform the steps from the link below and see if it helps.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/( )
Warning of Chkdsk.
Important: When running chkdsk on the drive if bad sectors are found on the hard drive, then chkdsk attempts to repair this sector. If no data is available while data may be lost.Hope this information helps.
Answer to us if you have problems with Windows Update or any other issue of Windows, and we would be happy to help you.
Good day!
-
I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?
Hi KevinRy,
Welcome to the Microsoft Answers site!
Unplug all external devices.
Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.
Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:
1.
Right-click my computerand then click Properties.
2.
Click the Advanced tab.
3.
Under Startup and recovery, click settings to open the Startup and recovery dialog box.
4.
Clear the automatically restart check box, and then click OK many times necessary.
5.
Restart your computer so that the settings take effect.
Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.
Please reply back with the error message you get because it helps us to resolve the error.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I had a virus on my computer and now when I click on a site to access Google page appears and I can't go to the website of Norbert I click on 'cache '. Help. Please, I beg you.
* original title - frustrated *.
Looks like that you always include parts of virus/malware (or some of the many friends who came along for the ride) or the damage they did is large enough. If you notice symptoms like this now - there are probably other issues, you haven't noticed. What I mean is that you're probably not clean and even if you are - the damage can be so vast, you should probably do a clean install and your stuff from restoring backups.
This "virus" you have on your computer and how did you clean it?
-
Before the recent update in Photoshop, I could open by going to the file menu in PS and bridge by clicking Browse in Bridge. After the update that no longer works. Now I first have to open the bridge and then PS Ce that has changed?
Other than a reset of Photoshop preferences,
You can start a conversation with the customer service. Contact the customer service They can remote access to your PC if necessary.
Maybe you are looking for
-
Tecra M9 and compitable motherboards
Good day to allMy Toshiba laptop Tecra M9 PTM91E - 12R features of a faulty video card.I replaced this card many times, but it's always get bad after a while.My repair shop of my recommended to replace its motherboard in order to get a solution perma
-
Product of Equium A200 - support failure recovery
Hello I have a laptop Toshiba Equium A200. After restarting itself a number of times where he died and is now on autoloop on-screen system recovery, that does not work. I tried to use the product recovery disc, but I keep getting "media test failure.
-
the video once played very well and then this problem occurred and he does everything that the time now on all the video playback... my child was in the ffdshow video decoder settings when I stopped him I wonder if he has changed the settings? Please
-
Windows Update service works only on Vista Home Premium 64 SP2
I am running Windows Vista 64 Home Premium SP2 on an Acer Aspire 6930 with 4 GB of Ram and IE version 9.0.8112.16421. When I try to update windows, he said the service is not running, and maybe I need to restart my computer. I rebooted and got the
-
Max FMC. number of manageable devices
Hello What we have here is a virtual CMF with a maximum number of 25 handy devices (FS-VMW-SW-K9). In fact, we have less than 25 device but in the future the amount will rise above this limit. (26 to present) What can be done to extend the maximum nu