When I connect AS400 and use SHIFT + f9 screen to do at night.

Similar Questions

• How to make the computer to look for SBRIO on a LAN connection when wireless connections LAN and are active

  Hello

  I plugged my laptop to a SBRIO using a cable, I also did the same mask subnet the SBRIO and my wireless connection for laptop is also active. I run an application to transfer files from the network to the SBRIO. I was able to download the files from the network using the wireless, but when I try to transfer the files from the laptop to the SBRIO the application attempts to use the wireless instead of the connection to the local network. Is there anyway that I can apply to use the LAN connection instead of wireless?

  Thank you

  Mouda.

  You must manually configure the settings for the SBRIO and map NETWORK cable on the PC. They must be presented on the same subnet. Using the crossover cable, you can configure your PC to use an address like 192.168.0.10 with a subnet mask of 255.255.255.0. Configure the SBRIO to use an address as 192.168.0.11 with a subnet mask of 255.255.255.0. The PC uses the network connection by default for all addresses that do not match the specific subnet on teaching secondary (cable in your case) NIC

• When travel abroad (overseas) and use the WIFI, I can get incoming emails and browse the web, but cannot send emails.

  If I can find the SMTP that is used by the hotel, I can simply change my outgoing SMTP accordingly. But invariably, they do not understand the issue and unless I can find the outgoing SMTP, I'm unable to send.

  Is it possible to automatically pick up the SMTP Protocol out of the WIFI service that I use? How can I change my settings to do this?

  No, there is no easy way to do it, because the SMTP settings are often specific to the provider.  What you might try is to contact your local ISP and see if they can give you an option to send when you are not connected to them.  In addition, you can use webmail to access and send e-mail.  If your ISP doesn't have this option, there are several free accounts or cheap you can register for (gmail, hotmail, yahoo, etc.).

  Steve

• If a Firefox window is open a 1password address open, only when I quit Firefox and use a 1Password user name and password is firefox open the necessary

  I'm keeping Firefox updated.
  However, it would be nice to use an address to 1password logon when a Firefox window is open and just opened another tab.
  See you soon
  Stan

  Hi mountfordp,
  I understand that you ask is why when you address window the 1Password Firefox does not open in another tab?

  I found that he was kidnapped and recommended update after version 40 Firefox: https://support.1password.com/v3-extension-firefox/

  However for the tab does not open I don't know if it's Firefox or the 1Password.

  In the past, a new profile has been recommended to be created with the latest version of 1Password in Firefox. Use the Profile Manager to create and delete profiles Firefox , first try a new profile and see if the new tab opens correctly.

• When I connect to Internet via wifi adapter screen goes blue

  When I tried to connect internet via wi fi adapter, and when I put the security password to connect screen and wi fi, pops up an error dump becomes blue. In the blue screen appear recently uninstall the installed driver.

  You can solve this problem for me?

  and then I restart my pc the dialog box appears with the error below right.

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               fe

  BCP1:                                                    00000006

  BCP2:                                                    85DC2CF8

  BCP3:                                                    43787254

  BCP4:                                                    00000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\011014-50091-01.dmp

  C:\Users\ARNAV\AppData\Local\Temp\WER-136095-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Please help me solve this problem

  Hello

  I would be grateful if you could help me with more information.

  -What is the number of brand and model of the computer?

  This problem can be caused by corrupted network adapters. I suggest to visit the website of your computer manufacturer and install the latest drivers for network and check if that helps.

  Check out the link:'t-working-properly#update-driver-hardware-isn't-working-properly=windows-7 http://windows.microsoft.com/en-us/windows/update-driver-hardware-isn

  See also: http://windows.microsoft.com/en-gb/windows/fix-network-adapter-problems#1TC=windows-7

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I just downloaded Firefox 4 and use the full screen. I don't like. How do I reverse this order?

  I try to retrieve the button drop down Firefox and can not find a way to do.

  Use the F11 key to switch between mode full screen.

• Can I install Windows 7 on Satellite click Mini L9W - B and use the touch screen?

  Is it possible to install Win 7 32 bit on a satellite click and it will always work to use the screen in the form of tablets?
  I'll buy this one for my dental practice and the intraoral cam maintains that Win 7 32 bit.

  Are you sure that it will not work with Windows 7? Usually there are problems with the software XP and Windows 7/8, but if it works with Windows 7 there is a good chance that it will work with Windows 8. If the software is the issue that you may be able to run the program in compatibility mode Windows 7.

• My Firefox drop-down list no longer shows when I connect Internet. How can I get that back so I can clear my history?

  When I downloaded Firefox, there is a green button for Firefox on the top left corner of my screen. He's gone, so I can't do things like clear my history. How can I get that back? I don't know when he disappeared. My computer is only a month and I have finally cleared my story about 2 weeks ago.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Ctrl + Shift + F).
  
  If you are in full screen view then hover over with the mouse upward to make the bar appear Navigation and tab bar.
  
  You can click the maximize button in the upper right to leave the mode full screen or empty space of a right-click on a toolbar and use "exit full screen" or press F11.

• Error 'nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll is not found"when you connect to the computer.

  Original title:

  Problem: I use DeLL Desktop.When I connect, these messages appear on my screen: nmapp.exe.unable to locate the component. This application has failed to start because MSVCP 70 .dll not found. Re-installing the application may fix the problem. Pls help. Thank you.

  Hello
  1. what version of Windows is installed on the computer?
  2. are you aware of any changes made to the computer, before the show?
  Assuming you have Windows Vista or Windows 7, follow the steps mentioned below.

  Method 1:
  

  Step 1: Perform a boot minimum troubleshooting and check which application reports this error
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Step 2: reinstall the application.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• stop windows live messenger from starting when I connect

  How can I get windows live messenger to stop opening when I connect to the computer

  http://ask-Leo.com/how_do_i_stop_msn_messenger_from_starting_automatically_and_logging_me_in.html

  To follow the Messenger from starting automatically when the connection and allow the automatic connection. Click on Tools, Options, general. Now acheck "automatically run messenger when I connect Windows" and "allow automatic connection when it is connected to the Internet.

  And read the rest of the info there re not to remember you.

  See you soon.

  Mick Murphy - Microsoft partner

• Control what dashboad a user sees when they connect

  Hello

  I'm running vRops 6.1 and users are imported from an LDAP source.

  I would like to configure the dashboard of the user, i.e. when they connect see and access to a single specific dashboard.

  any ideas/help?

  Thanks - Dan

  Hi Dan,.

  You can create the user dashboard, then share it with one or more groups of users. When you share a dashboard, it becomes available to all users in the user group you select. The dashboard will appear the same for all the users who share it. If you change a shared dashboard, the dashboard changes for all users. Other users can only view a shared dashboard. They cannot change.

• Install and help with black screen / timeout

  I'm pretty new to the scene of the VM and try to configure the ability for my bosses to connect to a virtual desktop, while they travel.  I have setup a Viewserver, a vCenter and a main domain controller.  I send you all the traffic through our firewall through the DMZ in the Viewserver.

  When I test this connection locally from a PC on the same network through the Client view, it seems to work fine.  I have a beautiful office in Windows 7 can be used.  When I leave the office and go to any other Internet connection, I have a login name, provide connection information, and then a black screen and that's where he stays.  In the end (after 15-20 years or more) he told me that the remote connection has been completed.  Short version is it works on the inside, but not outside.

  I have reviewed this error a few messages found and have made several steps such as insurance there is no active internal firewall (will re-enable them and fix them after I understand this), checked the Viewserver can properly search the PDC, the vCenter and so on.

  I'm really stuck here and have tried different things for several days.  That's a lot of your time to test, because it works fine locally, so I have to leave the building and get an external Internet connection to test it out-> in.  I have the public IP address of the Ste of connection on its own domain.

  For the purposes of this question, it is publicip.mydomain.com

  Internally, the machines are set up as:

  PDC 192.168.11.202

  vCenter 192.168.11.203

  Viewsrv 192.168.11.204

  The firewall is DMZ had to 192.168.11.204.

  Any help would be appreciated in the sovereign.

  Thanks for the update.

  If you have double checked these three steps, then it is probably time to use Wireshark to see what is blocking PCoIP in your environment.

  Take a look at this post for more information on this. http://communities.VMware.com/message/1860992#1860992

  You can initially run wireshark on the Client from the view, and then if that does not indicate where the Eastern bloc, then run it on the Security server. Look at just the traffic PCoIP. (4172 TCP and UDP 4172).

  This is how some other people have fixed what you see.

  Select this option.

• Watch the video on the Pearl Flip 8220 smart blackBerry phones, how to make horizontal and fill the entire screen?

  I have movies on my flip. When I look at a screen remains vertical and small. Is there a way to make the horizontal screen and use the full screen? Thank you.

  After some trial and error, I discovered, you must use the blackberry Media Manager to transfer your movies and when you move the film selected your file to your phone, you must select the option 'optimize '. When I did this it turned the film 1/4 turn so I could watch it on full screen. To make the small of DVD movies to the mpg4, I use a program called "convert M2 to Smartphone". It works well.

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help