When I connect my computer to my tv I get mode not supported on my tv screen

Similar Questions

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• When I connect my computer to my TV to stream films-it no longer works

  original title: connection

  When I connect my computer to my TV to the movies stream - it does not more-i don't know why - I tried a new power cord...

  Hello

  1. what happens when you broadcast films on television?

  2. do you get an error message?

  3. use Windows Media Player or Windows Media center to stream movies?

  See the link below and check if it helps you.

  From PC to TV, part 1
  Digital media stream to any room with Windows Media Center and Xbox 360

  http://Windows.Microsoft.com/en-us/Windows-Vista/from-PC-to-TV-part-1-stream-digital-media-to-any-room-with-Windows-Media-Center-and-an-Xbox-360

  From PC to TV, part 2
  Stream home movies to any room with Windows Media Player and an Xbox 360

  http://Windows.Microsoft.com/en-us/Windows-Vista/from-PC-to-TV-part-2-stream-home-movies-to-any-room-with-Windows-Media-Player-and-an-Xbox-360

• I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available

  I have an upgrade question. I received a notification when I connected my computer to the internet that Lightroom 5.7.1 was available had merge to HDR & Panoramic photos. I can't find these. Where can I find them.

  It is unfortunate that Adobe has chosen to use the "update" in the notice inside LR 5. It is not an "update". It is an 'upgrade '. Thus, you pay if you want. Also as usual, Adobe directs clients to the CC solution and makes it hard to find perpetual license option.

• When vga cable connection to tv message comes up not support on the TV screen

  When connection cable vga to tv to the computer message comes up not support on the TV screen

  There is a compatibility issue, which is that the TV is showing the signal it receives cannot be treated by the latter.

  If my suggestion is to look at the manual of the television or the manual online for television at his homesite to get 'accurate' requirements to connect your computer to the television, including DPI

  then see how you can get your computer to meet.

  you might need a buy a specialty graphics card (this is xp compatiable) who has the ability to convert computer and output to the TV signal.   in others, the graphics card can meet who needs the TV.

• Impossible to connect the computer to the internet after getting a virus

  Firewall settings

  I can't connect the computer to the internet after getting the following error message after I have used AVG 2011 to isolate and virus and rebooted my computer.
  Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.
  Check the settings of firewall for the HTTP port (80) and HTTPS port (443) FTP port (21).

  I can't connect the computer to the internet after getting the following error message after I have used AVG 2011 to isolate and virus and rebooted my computer.
  Windows cannot connect to the internet using HTTP, HTTPS or FTP.  This is probably caused by the settings of firewall on this computer.
  Check the settings of firewall for the HTTP port (80) and HTTPS port (443) FTP port (21).

  Which firewall do you use? First, click on start > run > type inetcpl.cpl > Ok. Now, click on the "Advanced" tab On the Advanced tab, you should see a button to "restore the settings advanced". Click on the button. Follow the prompts all to confirm your selection. Then click on the 'Connections' tab > LAN Settings button. Make sure that there is a check mark in the box "Auto-Detection" parameters and that there is NOT a check mark in the box use proxy settings. Try to connect to the internet. Post your results please.

• How can I change the video display Mode when the monitor mode not supported?

  While creating my new monitor, I changed the computer video display mode at 120 Hz by accident.  Now I see something on the monitor other than the words not taken in CHARGE the MODE.

  My system is a new HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3 ghz

  I tried the start mode by pressing ESC on power but do not help the startup options.  And the just F11 menu option makes the startup screen disapear and puts the monitor mode not supported.  Tapping F8 doen't work and tapping F12 just puts me in the bios menus that do not help.

  How can I upgrade the video card integrated with a video mode that is supported when I can't see the screen?

  I answer my own question because I found my solution, thanks to my grandson (freshman to Renselear Politech).

  I shoot to buy a monitor that displays a refresh rate of 120, so I could put my rear view.

  Here is the solution.

  My computer double exit DVI.  My grandson told me to connect my new monitor to the other output because the output does not get touched when I changed the original mode of production.  He has worked and is automatically selects the default monitors mode.  Then I've reconfigured the original output using the integrated display software. Solved!

• I have a digital signature, but when trying to install its software, it says "(Package of Installation not supported by the processor - it comes to i3)?

  I have a digital signature, but when trying to install its software, it says "(Package of Installation not supported by the processor - it comes to i3)?

  Hi Richard,

  1. what software are you trying to install?

  2 are. what digital signature you referring?

  3. What is the brand and model of the computer?

  4. you made any hardware or software comes to the computer before the show?

  Also check out the links for more information:

  What is a digital signature?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-a-digital-signature

  How can I decide that drivers are safe to install?

  http://Windows.Microsoft.com/en-us/Windows7/how-can-i-decide-which-drivers-are-safe-to-install

  Please write to us with the exact details of the question and the answers to the questions above so that we can help you further.

• HP Pavilion P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7 to connect the Sony HC20 Handycam.

  Original title: Sony Hanycam HC20

  I just bought a HP Pavilion P2 - 1140 W7 64 bit and may not know how to download video from my Sony Handycam HC-20 who

  using a Firewire connection. P2-1140 does not have a way to connect to a Firewire port and USB transfer is not supported by Windows 7.

  I looked in the spec of my card mother HP and there is no additional slots to add adapters, no PCI, PCI-e or anything that looks like

  as if you can add anything. I know that the Firewire to USB converters cable do NOT work, any suggestions please

  There are USB firewire converters, but I think it will be a situation of hit or miss--they are unable to work or perform very well.

  The only option I can think of that would work would be to use AV out on the camera and a USB capture card that records on the computer.
  You can also consider going back to the computer and get a different model that is built in firewire support or at least an extension connector in order to get an expansion card.

• When I start my pc the monitor reads "mode not supported".

  unplugged my pc & MONITOR. When I plugged it back in & has tried to start it, it keeps reading 'mode not supported '.

  Hello!

  The pc is probably set to a resolution that does not support the monitor. Start in safe mode and set the resolution to the native wreck of monitors.

  To start in safe mode, you will need to press F8 at the moment of startup and select Safe mode.

  Let me know if that is not the case.

  Kind regards

  Joel

• Lightroom 6 installer think that I am running Vista on my computer because it says that Vista is not supported.  I'm not under Vista, I have Win 7.

  Tried to install Lightroom 6 on my Win 7 PC.  He gave me the error code 15.  I ran the CCleaner which has been proposed.  Then tried to install.  Now, it seems that he thinks that I'm running Vista on my computer because it says that Vista is not supported.  I'm not under Vista, I have Win 7.  What should I do now?

  Hi mmcmm,

  See this thread: try to install lightroom 6 on windows 7 get interface requirement not met windows vista not supported

  Kind regards

  Claes

• When I connect my computer to live tv antena to sony tv with a HDMI cable it works. When I hang the computer for the sony surround on tv is its great video without sound

  The use of the computer to work with a live tv to a sony surround signal to the TV sony brava. (6 months) with HMDI cable.

  Now only works computer tv signal just on TV.   Now, I GET only video no sound when plugged in the Sony surround.

  Geek team reset the desktop computer, but it still does not work.

  Hello
  When you connect the live TV antenna to the TV by HDMI sony, it works fine, but when you try to connect through the entourage of Sony you have a problem. There seems to be a problem with the sound surround sound sony so I ask you contact sony support to make the necessary changes to get the audio output.
  Support for Sony
  http://eSupport.Sony.com/

• When I spend onmy computer it says that my profile is not loaded and I was logged as a temporary profile

  original title: temporary profile

  When I pass onmy computer, it is said that my profile is not loaded and I was logged as a temporary profile, I tried to restore to an earlier date, but it did not help, how can I sort it

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected
  on with a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the Google update (if you added the toolbar Google, Chrome)
  or Google Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at the next startup, then apply OK your way
  outside, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account for the lowering your user account (the lowest level)
  APPLY/OK, then go back and reset it to the Admin APPLY/OK - this clear help
  corruption. Do this several times. Do the same for other accounts that could have
  problems. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others when
  necessary. (just to fix it with, do not use regular account, a safety valve) Always
  keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the administrator hidden from the guest account in
  Here, if applicable.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account you can still use an Admin to migrate to a new
  one (remember to always leave an Admin account that is not used except for testing and)
  Difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• I have an Ipod shuffle, 1 GB, he thinks that this is the 2nd generation. When I connect to the pc to load, I get "there is a problem with this ipod. Scan to see if there is a problem"is no problem with a sweep. Well, thought, grow old, bought new on

  "" Thought the ipod can get adopted "used by date", although sometimes she would charge, others, maybe not bought 4th gen, 24 December 2015, 2 GB and received the same message. With the latter I have flashing orange.  I can load tunes on both, and once loaded, both work very well.  Concerned about the message and the inconsistencies in charge?  I wish I had some ideas, thank you. Otherwise a great little gadget, ideal to carry in your pocket for walking, gardening, etc, etc. RFAbird

  Amber flashing light is not an indication of a problem.  Light flashing just means DO NOT DISCONNECT - eject the iPod before disconnecting.  It has nothing to do with the load or the condition of the battery.  If you eject the shuffle in iTunes but leave plugged in, the led becomes solid (not flashing).  Full light means OK TO DISCONNECT.  With the light, the color has meaning.  AMBER means battery recharges.  GREEN means the battery is fully charged.

  Concerned about the message and the inconsistencies in charge?

  What is the "inconsistency in charge?"

  NOTE: The shuffle gen 2 cannot use the USB to host port cable supplied with the 4th gen shuffle.  The connector is different between the 2nd and 4th gen shuffles.  Use the original (with stand) cable for 2nd gen shuffle and ultra cable short with 4th gen shuffle.

  This message always appears when you connect two changes?

• When I connect my PC to the TV, I get back from my PC on my TV

  PC to TV hook

  I'm trying to display and use my PC on my flat screen TV. I hang the cable between the pc and the TV PC INPUT and I get only the background from my pc to my tv but nothing else. I need a drive to make it work? Help me please if you can... Jim

  Hi JimTillery,

  You can see the following link which will guide you through the process.

  Connect your computer to a TV

  See also:

  TV on your computer: understanding signals TV and TV tuners