When I connect to the wireless network, it shows that I'm offline and I can't open a webpage as Google or Skype.

Original title: network Ethernet NIC network adapter wireless network device

I WAS USING MY COMPUTER, THEN HE WAS BLOCKED COMPLETELY, SO I HAD TO REINSTAL IT AGAIN, BUT WHEN IREINSTALIT AGAIN ONCE I STARTED TO HAVE A PROBLEM THAT IS (WHEN I CONECT TO WIRLESS AFTER 5 MIN SHOWES TI I'M OFFLINE AND I CAN'T OPEN ANY PAGE ON GOOGLE OR EVEN MY SKYPE) ALTHOUGH I AM STII ONLINE, SO I HAVE TO SWITCH IT OFF AND TURN IT BACK ON, CAN YOU HELP ME FIX IT, THANKS

Hello

1. what version of windows you are using on the computer?
2. do you get any error code or error message?
3 were there any hardware or software changes made on the computer before this problem?
 
See the help article and check if it helps.
 
 
Response with more information to help you.

Tags: Windows

Similar Questions

  • can not print says printer connected to the wireless network but pc says printer is offline

    happened before the printer says connected to the network but pc says offline

    Ok

    Have you tried the Network Diagnostics to see you the network can see the printer

    Go to www.hp.com/go/tools

    Network Diagnostics has a link to the wireless printing site that can help out you.

  • Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

    I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

    However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
    How can I create a network bridge and get the wireless internet to connect please?

    Any help to fix this would be appreciated,
    P

    This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

    If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

    Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

    I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

    My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

    If someone could help on this - I would be very grateful

    Good news - update of my ongoing saga with this Belkin modem/router.

    Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

    So far so good

    Thanks for the help

    TREV Smith

  • Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

    Original title: Unable to connect to the wireless network

    Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

    I should add that I have tried the solutions of the previous forum on this topic, and none worked.

    Hi Marilynnla,

    Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

    Read this article and follow the steps. Lets see if it helps in any way.

  • Wireless network adapter cannot connect to the wireless network

    When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

    Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

    Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

    Troubleshoot network adapter problems to Microsoft link above.

    Try without commitment TCP/IPv6:

    If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

    http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

    See you soon.

    Mick Murphy - Microsoft partner

  • PC cannot connect to the wireless network

    Windows Vista and office computer HP.  The use of the Airport Extreme.

    All other computers in the House can connect to the wireless network.

    The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

    I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

    For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

    I'm ready to throw the computer out the window!

    Hello

    Check the PoodlesAway solution to the same issue here:

    http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

    ======================================

    Apple Airport may be your main problem - did you check its firmware?

    Read these
    http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

    http://reviews.CNET.com/8301-13727_7-10331876-263.html

    ======================================

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • B110A connects to the wireless network but no PC connection

    Hi Forum,

    I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

    However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

    When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

    Can anyone help please?

    Kind regards

    Amol

    Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

    What did he say?

  • Windows 7 taking a long time to connect to the wireless network

    When I try to connect to the wireless network, it takes about a minute or two.  I didn't have this problem until I updated my card wireless about a week ago.

    Thank you very much.  I think I solved the problem.  I didn't have this problem until I updated my card with the latest wireless.  But I uninstalled the new and re-installed version, and that seemed to solve the problem.

  • Satellite Pro A200 cannot connect to the wireless network

    Hello

    I have a Satellite Pro A200 and Tuesday night I was able to connect to a wireless network. I received an update, rebooted and now it doesn t seem to work.

    I can see the wireless networks available via the Toshiba Radar but cannot connect to my usual wireless network.
    Also, the wireless network icon disappeared from my system tray and if I go to Control Panel/network connections, I can't even view available networks because there is no option to do so.

    Any ideas?
    the FN/F8 will work?
    Help! Please, I beg you!

    Have you tried using System Restore and restore the operating system on time earlier?
    Maybe this will remove the update installed, and you can again use the WLAN.

    Check it out.

  • HP envy laptop laptop 15-ah150na: loses the connection to the wireless network device I had not only portable for 2 days

    Loses the connection to the wireless network sometimes directly after that the computer is turned on at other times after 5 min and sometimes after an hour.  No other device I have loses the connection to the wireless network.  Help, please.

    Hello @fairgame,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I understand that you have a problem with the WiFi and wanted to help you!

    First of all, try to review the next steps, offered by community member @Great-Christine-Tree:

    First of all, we have a step by step guide to guide you through the process of diagnosis here:

    HP PC - troubleshooting Internet and wireless network

    A second option is to try the following steps:
    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • I've updated windows and now my computer does not connect to the wireless network.

    I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

    Hello
     
    You can follow below link that can help you to solve your problem:
    How to troubleshoot wireless network connections in Windows XP Service Pack 2
  • How can I disable 'O2 connection manager' to automatically connect to the wireless network?

    Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

    I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

    Hi John,

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

    You can follow the steps in the link below.

    Uninstall or change a program:
    http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

    I would say O2 you back for more information in the links below:

    http://www.O2.co.UK/business/support

    http://community.o2online.IE/

    I hope that the information above helps you.

  • How can I configure windows update in order to start the procedure, when I connect to the school network?

    OT:help configuration of Windows Update.

    I use windows 8, now my problem is that I have to enter a user_name and password each time you start the browser, if you close the browser, or open another browser, you must enter user password again once you use a wifi or lab computers. Now when I connect to wifi, my browser instantly request name username-password but windows update is not so. I tried this a few times, only once named windows update displays dialong box asking username and password and it takes hours to do.

    How can I configure windows update already if start update already when I connect to the school network.

    Wifi authentication which traverse the browser means that you still need to open a browser and a connection that first, before any other programs can access the network.

  • C309g-m - unable to connect to the wireless network, touchpad hangs

    Hello.

    As PrintDoc has suggested, it's a new thread in the suite here, where I jumped in with a diversion to the station 23.  I'm sorry.

    Here are the details:

    (1) system:

    Router is Thomson TG585n provided by ISP O2/Telefonica.  Download high speed ADSL to ~ 9Mbps.

    3 devices connected and stable:

    -L' computer running XPSP3, connects to the router via homeplug (Ethernet on electrical wiring).

    -Laptop running Vista Home Premium, connects wirelessly with WPA2-AES.

    -Mobile phone runs Symbian 60, connect wirelessly in the same way.

    Router is configured to operate on channel 11 g wireless and accept new devices automatically with the appropriate security password.

    It is a House of 3 floors - router on the top floor has always worked. computer bureau on a middle floor with printer; laptop and the phone can be anywhere.

    So far so good.

    Now, I want to add the wireless printer and I'm really bad.

    (2) summary of symptoms:

    I bought the C309g-m on Amazon UK in January 2010.  USB connection with assistant easily.  Migrated to wireless via the front panel.  Easy. Then tried to add a 500 GB Freecom Network Drive (NAS device connected to the router) and has failed, because I didn't RTFM.  After removing the FND, I get an error message of HP to the effect that I have "tried to set the printer's IP address" and lost the connection to the printer wireless.  Have not seen this message since then, so I can't reproduce.

    As I said, I removed the FND, who never appeared on the network in any way.  However I still can't connect to the printer wirelessly.  The wireless connection wizard crashes after asking to specify a password.  The wireless network Test report that the radio works, but shows FAIL the entrance of 'No filter '.  I looked into the console of the router and there is nowhere to set the MAC address filtering, so I'm stumped.

    I tried to 'Add a device' CD, for network via USB settings.  It takes forever (30 minutes?) to come up with the same error "MAC address filtering.

    One last thing: if I leave radio turned on (the default lighting) will lock the touchpad after a few minutes to the home screen.  If I disable it, it's fine.  Once locked, the only way to stop is to unplug the power supply.

    Finally - all the base printer functions very well.  I can print and scan through the USB port and can take copies.

    Thoughts:

    (a) I think my router settings can be screwed.  I don't see a way to set limits to the DHCP pool, I should be able to.  However, since I was 3 devices that connect to the Internet I am reluctant to do a factory reset in case I lose those!

    (b) there's something wrong with the printer - but I don't know what.

    c) I could try temporarily move the printer to the i) door ii) within reach of hardwirable of CAT5 and wireless range

    (d) the fact that I can connect the printer (wireless) or DNF (cable) makes me suspect the router.  However, I have not received any support from O2: they said it was an internal problem of LAN/WLAN and nothing to do with broadband, therefore, were not willing to help.

    I spent hours on this and get nowhere.  Help, please!

    Tim.

    BTW - I'm in the United Kingdom.

    Well, I think that there are many more problems with 'atypical' routers and HP software as there are with HP printers.  I see not nearly as many problems with certified brand routers WiFi (like Linksys, Netgear and D-Link), as I do with large brands and Belkin.

    The worst offenders are rented modems/routers that your ISP provides.  For some reason, they have a lot of industrial property settings and firmware that simply don't play well with HP printers (may be others, but I would never buy another printer HP - I know way to much about printers after their design for 25 years).

    A reliable and good solution cheap is to go buy a $40 or $50 Linksys router and replace stuff not expensive you have (or paste according to your router/modem rented).   Time and time again, I've seen problems disappear just after installing a standard router.

    You can reserve an IP address for a wired connection, but because parts wired and wireless to the printer have separate MAC addresses, this IP address is not available for the wired connection.

    Read the thread if you wish.  Discover the solutions on this website if you want to, but I still think you have a defective printer.

Maybe you are looking for

  • Why did you ruin bookmarks

    in the most recent version, you click on bookmark and I then have to click it a second time to choose where to put it. Here are the 2 steps. in the latest version you clicked on a bookmark, selected where to put the new bookmark and clicked on record

  • Satellite M40X-115 - cursor will not stop!

    I have a toshiba Satellite M40X-115 laptop with XP. My cursor starts moving and will not stop. For example when I try to log on to the laptop and click in the password field. the cursor starts moving, fills the space, I try to delete it, but the curs

  • Where can I upgrade my windows 2008 R2 server?

    Currently, I have Windows Server 2008 Standard and wanted to know if I was eligible, or if not how he would upgrade to the R2 edition? Regards, Paul

  • Windows Media Center - Internet TV - availability and navigation of the full episodes.

    With regard to the full episodes of Windows Media Center - Internet TV. I've seen a few questions about this in the Microsoft Answers forum, but 2 / 3 times the official response was unrelated to the question asked. So, to be clear, I'm not talking a

  • I recently lost all my Word and Excel files more music, photos, almost everything

    original title: information loss I recently lost all my Word and Excel as well as music, photos, files about everything really. After several cleaning including defrag programs I discovered that all the files are hidden and when you browse through to