When I connect to windows it says build 7601 windows not genuine, this could because im using the hardisc in another computer I just built or why it is dislaying this message?

Similar Questions

• When you connect to windows, there is a profile error indicating that the profile cannot be access.

  I tried to connect to my computer, just one user (Administrator), after installing a servie pack 2 tree VISTA windows update, I rebooted then, when input my password a message says that the user's profile cannot be access.
  Then I booted safe mode and was able to connect. I then tried to add a user, but trying to administrator accounts, is locked and can not access it.
  Restarted again, but has not been able to log into the user in normal profile.

  What I can do.

  Best regards.

  Arsene

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows not genuine. Error 0xC004F063 out of the blue, windows has been activated for months.

  Of nowhere while he was working on some homework, windows removes a stress load on my head that I don't have right now. I got a notice that I don't have a genuine copy of Windows 7 with error 0xC004F063.

  I have to go to work now, but will return as soon as possible to deal with this. Any help you can offer would be great, I tried to do the thing SLUI.exe 4 but there is no option to even activate over the phone for me. He just told me to buy a new license.
  
  
  Here are the:
  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  
  

  Validation code: 50

  Code of Validation caching online: 0x0

  Windows product key: *-* - 4F8HK - M4P73-W8DQG

  The Windows Product Key hash: Xs1iQgVeo0C + sObJxS7eu + FuBPQ =

  Windows product ID: 00359-OEM-8992687-00057

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.1.7601.2.00010300.1.0.003

  ID: {7DD0A71A-0C8F-4CC5-A561-D272EC4D86F2} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows 7 Home Premium

  Architecture: 0 x 00000009

  Build lab: 7601.win7sp1_gdr.120830 - 0333

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  
  

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  
  

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  
  

  OGA Notifications data-->

  Cached result: n/a, hr = 0 x 80070002

  Version: N/a, hr = 0 x 80070002

  OGAExec.exe signed by: n/a, hr = 0 x 80070002

  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  
  

  OGA data-->

  Office status: 109 n/a

  OGA Version: N/a, 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
  
  
  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Fauxe\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed
  
  
  Analysis of file data-->
  
  
  Other data-->
  Office details: {7DD0A71A-0C8F-4CC5-A561-D272EC4D86F2}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-W8DQG00359-OEM-8992687-000572S-1-5-21-4252885419-3906351918-2397252778TOSHIBAQosmio X 505TOSHIBAV2.90 20101210000000.000000 + 00066DE3707018400FC04090409Central Standard Time(GMT-06:00)03TOSQCITOSQCI00109  
  
  
  Content Spsys.log: 0 x 80070002
  
  
  License data-->
  The software licensing service version: 6.1.7601.17514
  
  
  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800057-02-1033-7601.0000-2902012
  Installation ID: 000000644431633803415351396466594251506555016825187175
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: W8DQG
  License status: Notification
  Notification reason: 0xC004F063.
  Remaining Windows rearm count: 3
  Trust time: 16/10/2012 14:44:22
  
  
  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 10:16:2012 14:19
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  
  
  
  
  --> HWID data
  Current Hash HWID: OAAAAAMAAgABAAEAAAAEAAAAAgABAAEAln1cwwPfdxZtNfBLiIL6bRSJilL tCeUES5ganqRXF0 plus
  
  
  Activation 1.0 data OEM-->
  N/A
  
  
  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CALPELLA
  HPET INTEL CALPELLA
  START PTLTD $SBFTBL$
  MCFG INTEL CALPELLA
  SLIC TOSQCI TOSQCI00
  SSDT PmRef CpuPm
  
  
  
  

  Activate using the key on the sticker of the laptop and you should be OK.

  J W Stuart: http://www.pagestart.com

• 8.1 Pro Windows - use the product on another computer key

  Original title: DeltaCharlie

  I updated my laptop old Win 7 to Win 8 Pro to Win Media Pack Pro 8.1. (What a mouthful!) I used the version of upgrade box acquired from Microsoft, which came with 2 discs and the key card. Now that I have accomplished this, I plan to do the same thing with my office.

  My question is now that I have a new product key for the Media Pack Pro version on the laptop, the can, or am I admitted that I use the original key of the box (and of course the media) to start the process even for my office? The key that exists and is active on the laptop is different from the key that came with the upgrade package Windows 8 Pro.

  Thank you

  Sorry, but the answer is no, you can't. The original key from Windows 8 Pro is still considered the basis for the upgrade of Windows 7 and the option 'Add a new feature' to install the Media Pro Pack.

  J W Stuart: http://www.pagestart.com

• Problem with Vista - saying my copy is not genuine after 2 years of use?

  Sorry posted this in another thread too so read slightly heated comments and suggestions that each person starts a new thread... anyhoo this is the result of my report. Diagnostic report (1.9.0027.0):-Windows Validation Data--> Validation status: Invalid Code of Validation of license: 50 of the online Cached Validation Code: n/a, hr = 0xc004f012 Windows product key: *-* - 27HYQ - XTKW2-WQD8Q Windows Product Key hash: U8YEZzymoD4DMyaMb32rPrNIS90 = Windows product ID: 89578-OEM-7332157-00061 Windows product ID Type: 2 Windows license Type: OEM SLP Windows OS version: 6.0.6002.2.00010300.2.0.003 ID : {870AA2D3-236B-4F15-B54D-B0B91CF3EA18} (3) is Admin: Yes TestCab: 0x0 LegitcheckControl ActiveX: N/A, hr = 0 x 80070002 signed by: n/a, hr = 0 x 80070002 product name: Windows Vista (TM) Home Premium Architecture: 0x00000000 Build lab: 6002.vistasp2_gdr.101014 - 0432 TTS Error: Validation diagnostic: resolution state: n/a Vista WgaER data--> ThreatID (s): n/a, hr = 0 x 80070002 Version : n/a, hr = 0 x 80070002 Windows XP Notifications data--> cached result: n/a, hr = 0 x 80070002 file exists: No. Version: n/a, hr = 0 x 80070002 WgaTray.exe signed by: N/a, hr = 0 x 80070002 WgaLogon.dll Signed By: N/a, hr = 0 x 80070002 OGA Notifications Data--> Cached Result: 100 Version: 2.0.48.0 OGAExec.exe Signed By: Microsoft OGAAddin.dll Signed By: Microsoft OGA Data--> Office Status : 100 Genuine Microsoft Office Standard Edition 2003 - 100 Genuine Microsoft Office Publisher 2007 - 100 Genuine OGA Version: Registered, 2.0.48.0 Signed By: Microsoft Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3 Browser Data--> Proxy settings : N/a User Agent : Mozilla/4.0 (compatible ; MSIE 8.0; Win32) default browser: C:\Users\user\AppData\Local\Google\Chrome\Application\chrome.exe download signed ActiveX controls: fast download unsigned ActiveX controls: disabled run ActiveX controls and plug-ins: allows you to initialize and script ActiveX controls not marked as safe: disabled allow scripting of Internet Explorer Webbrowser control: disabled Active scripting: allowed ActiveX controls recognized safe for scripting : allowed File Scan data--> data--> Office details: {870AA2D3-236B-4F15-B54D-B0B91CF3EA18}1.9.0027.06.0.6002.2.00010300.2.0.003x 32*-*-*-*-WQD8Q89578-OEM-7332157-000612S-1-5-21-2275782234-3048772887-1132673674Hewlett-PackardSLIC-MPCHewlett-PackardF.1220090323000000.000000 + 0009A323507018400F80c 090409CEN . Australia Standard Time(GMT+09:30)03HPQOEMSLIC-MPC100100Microsoft Office Standard Edition 2003113A68CD47C214066HaSwahhZFGb3GGFTkmEv6uW9ilM = 70141-051-7765197-561271100Microsoft Office Publisher 20071225299B8B60F6F78gNWDSECLSwa7EXyIqIPBGJFZt6o =81613-956-1993571-629331 Spsys.log content: 0 x 80070002 License data--> version of the licensing service software: 6.0.6002.18005 name: Windows Vista (TM), edition HomePremium Description: OEM_SLP Windows operating system-Vista, channel ID of Activation : bffdc375-bbd5-499d-8ef1-4f37b61c895f the Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f Extended PID: 89578-00146-321-500061-02-3081-6002.0000-1692011 install ID: 006316001370978554177895924864656472617103176700409710 processor certificate URL: http://go.microsoft.com/fwlink/? LinkID = 43473 Machine Certificate URL: http://go.microsoft.com/fwlink/? LinkID = 43474 use license URL: http://go.microsoft.com/fwlink/? LinkID = 43476 product key certificate URL: http://go.microsoft.com/fwlink/? LinkID = 43475 partial product key: WQD8Q license status: Notification Notification reason: 0xC004F059. Windows Activation Technologies--> s/o HWID data--> HWID current hash: data OEM Activation 1.0 NgAAAAEAAgABAAEAAQADAAAAAwABAAEAeqjuyVAeRPB6fzIZ/N3y9C3imog8 / gX7sPboYEbK--> s/o OEM Activation 2.0 data--> valid BIOS for OA 2.0: no, not valid SLIC table Windows marker version: n/a OEMID and OEMTableID consistent: n/a BIOS Information: ACPI Table name OEMID value OEMTableID value APIC HPQOEM SLIC - MPC FACP HPQOEM SLIC - MPC HPET HPQOEM SLIC - MPC BOOT HPQOEM SLIC - MPC MCFG HPQOEM SLIC - MPC LAURENCE ASF! HPQOEM SLIC - MPC SLIC SLIC - MPC SSDT PmRef CpuPm HPQOEM so this is do everything perfectly logical :| Help!

  Hello

  Here's where the reposting this report of diagnoses of MGA

  Questions relating to the Windows Vista Software Protection Platform - Non-genuine dialog boxes, problems of validation or software licensing services messages.

  http://social.Microsoft.com/forums/en-us/genuinevista/threads

• When I connect to Windows 7 after that my laptop has been asleep, the Welcome screen will have 10 minutes to go beyond.

  When I connect to Windows 7 after my laptop has been asleep, the Welcome screen will block for always (10 + minutes). It does not every time, but maybe once all 5 or 6 times and it's happened lately. I can just shut the computer off and the newspaper with no problem after starting it upward, but I'm afraid, there may come a time where it does not work.

  I had this problem since I got my computer 2 months ago so I don't think it's related to what I have installed. Has anyone else encountered this problem and has found a way to fix it? Is this a common bug in all of Windows 7?

  original title: Windows 7 stuck on the Welcome screen

  Hello

  Safe mode - repeatedly, press F8 as you bootup. Another method is to start - type in
  Search-> find MSCONFIG in top box - just right-click on it - RUN AS Admin Startup tab
  -check the Safe Boot (network) APPLY / OK. Don't forget to change it if necessary.

  Try a system restore before what happened: (you can run system restore
  in the Windows as well however it sometimes works better in safe mode-
  repeatedly press F8 as you start.)

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ==========================================

  If it is mounted on the homescreen?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  
  ======================================

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I am running Windows Vista with IE9. When I connect to windows live hotmail, I get an error that says "upgrade your browser" message while I'm in IE9. How to solve this problem?

  When I connect to windows live mail when this error occurs, the images are irrelevant (ads, page scroll bar, unable to move emails in a folder).  I can open emails, but enamel is images are irrelevant and are not visible.  All solutions?

  Hello

  The question you have posted is related to Windows Live and will be well suited in the Windows Live Forum. Click on the link below.

  Windows Live Solution Center
  http://www.windowslivehelp.com/product.aspx?ProductID=1

• "load error" message when you connect to windows vista account___

  When you connect on windows (vista) to my sons account, a window appears with the Dll Run in the upper left corner and a message that says: error loading C:\Users\... it indicates the name of my son, then - Home\AppData\Local\l41DMut.dll.  It does not appear on the admin or any account of my other children. (parent) account.

  I have tried to download a Web filter, but could not.  I wonder if this error message is the problem.  Even if this is not the problem with the download works do not, should not be there.  You can click on the x to close the box (it always appears twice) and then open Mazilla Firefox, etc.

  What is going on?? Can you help me?  Thank you!!

  Google has nothing for it; normally, who points to him being Malware...

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 641 cannot connect to Windows Installer and it could be installed incorrectly & error 80070641for Windows Update.

  Original title: Windows Installer does not properly.

  I am running with Vista SP 2 and since June, I have had many updates windows installation failures and get error 641 80070641 and just. Also have had difficulties to install other software. Tried to download Fixit but it wouldn't install and gave me an error 641 and message saying cannot connect to windows install and it could be installed incorrectly. I changed nothing because it has worked well. Also when I press start button to the right next to the stop etc. which is fior install and then stop includes an exclamation in yellow.  I hope someone can help, Murray

  Hi Murray,

  Have you followed the steps in your previous post?

  Because of Windows Installer, you can follow this link & check if the problem persists:

  Problems installing and uninstalling programs on Windows computers

  Hope the helps of information.

• When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again.

  When I click on anything it either in the Outlook Express Preview window to stop answer and I have use the ctrl-alt-del combination for her all over again. Anyone out there have the same problem? If so what did you do about it.

  Original title: I'm under Oulook Express 6 Windows XP Home SP3 environment.

  Bruce:

  The problem has been fixed (I think) but in a most unusual way. Let me explain.

  When I was closing down to give the computer a rest yesterday, there was a pop up saying that vprotector expected to close. He really wanted the process of closing until I clicked on finish the process. Curious to know what vprotector is, I searched on the net and got a lot of shots, saying: it is a virus and should be deleted pronto. So I searched the hard drive for the vprot. * and found in the folder program files for AVG!

  I then went to AVG to see if it's really a part of AVG and they said yes. If there is a problem with vprot, the toolbar is at fault and needs to be reinstalled. There was one click here to download and run the part of the program to fix the problem. However, I had WebRoot antivirus running that stopped the download of this program as a virus. Because I trust AVG, I've disabled WebRoot and reinstalled the AVG search bar.

  I haven't restarted WebRoot and computer flying along as it should, and OE is the link to IE when I click on a link as it has always done.

  Seems to me to be the faulty AVG toolbar and a cross with two virus programs upward was at fault. Thank you for your time. Your reply gave me a chance to think differently this problem could arise.

  Computers are really complicated machines and we have to be complicated to deal with their problems.

  Thanks again,

  Fred

• My compaq F572US says that windows is not genuine after a re-install through the oem disks

  I bought the reinstallation discs for my Compaq since I lost the original, and when I installed Vista, I put the key and it 'active', but he always says that my copy is not genuine. Is, this is the same copy supplied with the computer, there always the same stickers and key in the back are readable. Help, please? Already, I went on the Web site for the real analysis and that the when the windows activated, but he says still no authentic. :-(

  No more, thank you. After clicking on the link of the pop - up saying windows not genuine, he had me download software that has validated the copy. I sucked power / PC and now its OK. :-)

• Windows 7 Build 7601... Windows not genuine

  I have Windows 7 Ultimate for 6 years with no problems.  About three weeks ago, I renewed my subscription to McAfee - no problem.  A week ago, I was surfing the web, but I have this error message - Windows 7 Build 7601 this copy of Windows is not genuine.  I don't have the original receipt, but the Windows sticker is on the back of my HP laptop and I can see the product key. I tried to re - enter the product key (from in the Panel configuration, then systems), but he says that the number is not valid.  Can anyone offer any suggestions?

  Windows 7 was released in October 2009, which is about 3 years.

  Which edition of Windows 7 is listed on the label at the bottom: Home Premium, professional or ultimate edition?

• Hello, I use photoshop cc 2015 for PC. Well my PhotoShop when I try to start texxto tool says the following error message: could not complete your request because something prevented the text engine has been started.

  Hello, I use photoshop cc 2015 for PC. Well my PhotoShop when I try to start the text tool says the following error: could not complete your request because something prevented the text engine has been started.

  Go through the Troubleshooting Guide to solve this problem

  Troubleshoot fonts | Photoshop CS6 2014 CC, CC, CS5

  Error text engine using the type tool in Photoshop CC | Windows 8

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• I can connect to windows live hotmail, but I can't open the emails.

  "I can connect to windows live hotmail but I can't open the emails, Server error appears on the screen, but I'm connected to the internet, please help.

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

  According to the error you found, it may be a known issue, see the following announcement:

  http://windowslivehelp.com/thread.aspx?PostID=5785957e-6007-48a1-85c7-03170a5a4086#5785957e-6007-48a1-85c7-03170a5a4086