When I connect XP it creates a new user profile for me every time. All my documents are gone?

Similar Questions

• What to do with the old user profile after you have created a new user profile

  original title: new user profile

  I was told my user profile is corrupted and create a new one, if I do this is it recommended to give up and delete the old? Or simply use the new profile for the intended use of the new?

  Hello

  They are similar, if not the same, as your question then use these methods to correct problems
  with the account or migrate to another (explained in the last link however you please, don't skip the)
  other measures to start).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Restart the system created the new user profile

  When trying to connect to my laptop (before leaving), I have a blank screen with only a cursor before I could log on to the computer. I got tired of hitting CTRL alt del to get into the Task Manager, but he did not do anything.

  Then, I held the power button for five seconds to turn off the computer and restart it.  When he started upward, it showed an error that says the computer is not stopped correctly and on this screen, there are several options to reboot windows, I chose the option "restart windows normally" I could connect with my fine existing password, but when the windows actually open, my experience had changed and all my files are gone.  After some research, I found that all the old information of my were still there, but a separate user profile had been created and everything has been re-pathed to the new user.  The new user profile name was my existing profile name, then my name with a .pc at the end (ie. user name - username.pc).

  My questions are twofold: one) what the hell happened? and (b) what is the simplest to make everything re-pathed to my existing user profile.

  Thank you

  You have been put in a temporary user profile because the original was damaged. You can try the techniques below. If this does not work, let me know and I'll give you another path.

  Critical files are under % systemdrive%\users\user-account\ntuser. The ntuser.dat file is actually a registry hive. Run regedit high and select HKEY_USERS and "load hive" in the menu. Now, go to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

  There is a line for each profile. If a profile is bad, check:

  (a) that the name of the key does not stop in ".bak" (remove .bak If it)
  (b) that the RefCount value is 0 (change it if it is different)
  (c) that the State value is 0 (change if different)

  If this is not the case, make the changes and try to connect as this user.

  More details of MVP Aaron Tiensivu - assume in this example that the user name is "atiensivu", field is "personal" and the user profile is located in % systemdrive%\users\atiensivu. Letter is usually C: on standard Vista installs. Replace each instance of "atiensivu" by the username of the corrupted profile.

  1. If you can log in profile, take note of the variable value environment % USERPROFILE. It will probably be "C:\Users\atiensivu" or "C:\Users\atiensivu.staff". Logoff.

  2. If you have opened a session with the profile at any time since your last reboot or you think that there are files in use in the profile, reboot. The important part is to ensure that there are no open files in the directory of the profile broke.

  3. log in as administrator or another account that has local administrator rights.

  4. run "takeown /r /a /d y/f % systemdrive%\users\atiensivu.

  5. starting at % systemdrive%\users, rename "atiensivu" to "atiensivu.old".

  6. in % systemdrive%\users, create a directory named "atiensivu".

  7 run "takeown/r/u staff\atiensivu/f % systemdrive%\users\atiensivu".

  8. run regedit and go to HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList and remove the SID key to the corrupted profile. Best way to find the correct SID is looking for the 'ProfileList' key to the directory mentioned in %UserProfile% in #1 step.

  9. closure of the session.

  10 log on the account "atiensivu". A new profile must be created. Copy all the files you can of the old profile directory.

  Orders "takeown" might be overkill, but I don't like permission errors.

  MS - MVP - Elephant Boy computers - don't panic!

• How to remove an admin account and create a new user profile

  Hi, I have been using my 2 in 1 PC since July last year and I'd like you guys to show me the steps on How to remove an admin account and create a new user account.

  Hello Nicolas,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you try to delete a local administrator account?
  2. are you able to connect using the Microsoft account?

  Thank you for your query details.

  I also like the fact you want to know how to remove an administrator account and create

  a new user account.

  If you are able to connect on the Microsoft account, I suggest you try the following steps to remove an administrator account.

  a. press Windows + X keys and click on computer management.
  b. click on "local users and groups" and then click on "users".
  c. right-click on the account which you want to remove, and then click 'Remove'.
  d. click 'Yes', if the prompt message.

  To create a new user account, please see this article:
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  See also:
  User accounts: FAQ
  http://Windows.Microsoft.com/en-us/Windows/user-accounts-FAQ#1TC=Windows-8

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Why should I create a new user profile when you remove a damaged user account?

  I have a corrupted user account and was referred to the following link http://windows.microsoft.com/en-CA/windows-vista/Fix-a-corrupted-user-profile

  However, I don't understand why we're required to go through this complicated process when we go to Control Panel - user accounts and family safety-user accounts - add and remove accounts delete user accounts until you can actually remove an account asks you if you want to keep the files of this account.  It is said that it can automatically save the contents of this user account office and favorite Documents, music, photos and videos in a new folder on the desktop.  I realize, this does not include e-mail messages, but I thought I could export those to a memory stick and then import them into my new user account.  It all seems a much simpler process than to create a new profile.  Why Microsoft suggests must create a new profile?

  Hello Kodika

  Thanks for the return of the response.  I guess that it was just a typo, but it's OK.  Please let us know if you have any other questions or you are experiencing other problems.

  Thanks again!

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I created a new user account for my wife but she cannot open a session because of the messages "the user profile Service has no logon. User profile cannot be loaded. "How can I fix it? Thank you. Larry

  I'm on a Pavilion dv7, using Windows 7.

  Sounds like a corrupt user profile:

  Corrupt user profile:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Recently, I had to create a new user profile on my computer and am currently loaded with my accounting software of the migration to the new profile.

  I am hoping there is a simpler alternative to migrate my work in lightroom, as if it were a new computer.  The paths are the same.

  I am a little disappointed because I thought at the very least, to logging into the software would reach out to the cloud and find my complete collections.

  After all, I can view on my mobile.

  In any case, I just want to get my work without having to do another import.   There must be a reason behind these weekly backups right?  Is there a way to recover them?

  Hi moto66,

  Greetings.

  What version of LR you use.

  You need to transfer your catalog and images on the new user account.

  Once you have all the images and catalogue on this new user account, given correctly, related images you should be able to see your collections.

  And also make sure that there is no broken in the catalog and images link, if this link to find missing persons of the images while transferring data to a new user account use

  • https://helpx.Adobe.com/Lightroom/help/locate-missing-photos.html

  Concerning

  Rohit

• My computor would not start windows, so I got the opption to boot with the disc. But with the TI istalled a new windows 7 on my computor and all my files are gone. How can I get the file.

  second copy of windows 7 has been installed. How can I retrieve my files from the old copy of windows 7

  That depends on the options you chose when you made the installation.  If you chose to keep your old files, you can view the folder c:\windows.old .  If you opted to install on another partition, you can retrieve the files from the old partition.  Otherwise, you would have to have supported your computer before reinstalling.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. External hard drives 1 TB are about $85 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• I created a new user account, but it does not appear to connect to it. (Vista Home Premium)

  I created a new user account for my admin account.  I tried to create a standard account and I tried to change to an administrator account.  The only place that this account presents itself is managing it new user accounts in Control Panel.  If I try to change user or sign out and then sign back, it never gives me the possibility to sign until the new user account that I created.

  I read another post that said to try to restart in safe mode, what I tried without success.

  I also don't get no error messages, so I was not trying to fix anything, given that I'm not sure it's broken and I don't want to do something worse.  I only use this computer and Vista for a few days now, so I hope it's something simple I'm missing because I am not yet familiar with the operating system.

  Thanks for any help you can offer.

  AFBurris

  Hello

  Logon as administrator

  You must open a command prompt at the entry of the order.

  Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN

  Run CheckDisk and continue as needed.

  Good luck. Rob - bicycle - Mark Twain said it is good.

• How can I create a new user account any movement towards it and delete the old

  Win7 need to create a new user ACCT. move all the Info for it because want to rename the computer, and then delete the old user account

  To create a new user profile

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. Open a user account by clicking on the button start , by clicking on the Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on create a new account.

  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

  To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  1. Log on as a user other than the new user that you created or the user that you want to copy the files.

  2. Open Documents by clicking on the button start , and then clicking Documents.

  3. Click on the Tools menu, and then click Folder Options.

     If you don't see the Tools menu, press ALT.

  4. Click the view tab, click hidden files and folders, clear the Hide protected operating system files check box, and then click OK.

  5. Find the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.

  6. Select all the files and folders in this folder, except the following files:

     • Ntuser.dat

     • Ntuser.dat.log

     • Ntuser.ini

  7. Click the Edit menu and then click on copy.

     If you don't see the Edit menu, press ALT.

  8. Look for the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.

  9. Click the Edit menu and then click on paste.

     If you don't see the Edit menu, press ALT.

  10. Sign out and then sign back in as a new user.

      If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.

• SRV Win2k3 creating the new user at startup profile

  My Win2K3 Server creates a new user profile when starting, rather than use the existing account.
  For example, the account is called "USER"
  It creates a new profile named "USER. DOMAIN ".

  The "new USER. The DOMAIN profile"seems to have migrated all the parameters of the 'USER' profile, so that it is almost impossible to tell them apart.

  My problem is that this profile does not seem to be able to access the DHCP and DNS server (and other services) and the other server Win2K3, which is of the BDC.

  I tried to remove the disk from the machine and on another windows machine, remove the directory "USER. DOMAIN"and place it on a USB key. Then, turn the player on and start again. It just creates another "USER. The DOMAIN profile"again but this time that all parameters were also lost as if it created a whole new USER profile from scratch.

  I need to get her back to the original profile 'USER' to make everything functional again.

  I would also like to know how this happened and why, if someone wants to be good enough to explain it to me.

  Your help would be greatly appreciated.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• When a right click to create a new folder, I can't see the new option 'file' in the menu. Why?

  I'm running Win 7 Ultimate and it happened on my system for the first time: when a right click to create a new folder, I can not see new option 'file' in the menu.
  I remember that I did not create new records from the last 5 days, so I can't say when the problem came. But I remember that yesterday I uninstalled 'free. '
  antivirus application which disappointed me a little. And it was the only action I suspect to have effect on my system.
  So I can't create folders in the usual way. And I need help to solve the problem. Moreover, the cmd command line works and when I type:
  MD x:\AA,
  The result is a folder named AA at the root of drive x:

  Again, I ask for help.
  Thank you
  Chris

  Hello

  Go to the following site.

  File Association fixes for Windows 7 - the Winhelponline Blog:
  http://www.Winhelponline.com/blog/file-Asso-fixes-for-Windows-7/

  In the blue box, click on the item in folder and download the file to your desktop.

  Unzip the file.

  Double-click the folder_fix_w7.reg file to add the information in the registry.

  In the meantime, you can also use the keyboard shortcut to create a new folder.

  Just press Ctrl + Shift + N.

  Concerning

• When I create a new user, the profile is not stored in my regedit.

  When I try to log on to my computer under a different name, I get the error saying profile services cannot load profile. When I created the new user, and then restarted, I checked the regedit and the profile is not listed there. Why is it not save the profile of the machine?

  Hello

  The question is on the domain environment and the post would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• How to keep my entire office when I create a new user account

  I just created a new user account to solve a problem with my account live mail, but I want to keep my old office display.  How to achieve this?

  Hello

  Thanks for your posting in Microsoft Community

  What type of account you created?
  Is it a limited account or administrator?
  If sa is an account limited, you will need to log in as administrator account and you must give permission to access Office

  If it's an administrator account you can access the desktop computer from the old account to which you want to access by going to
  my computer > c drive > user > desktop and copy those file on your desktop or other disc

  Account limited, you must log on as an administrator and give permission to access desktop of type lusrmgr.msc in the box RUN and press on into the House.

  Double-click the users folder > right click on the new account is created (have you creat) > properties > click on Member of > add > administrator...

  And trying to hold the Office to your account