When I enter my product key of Windows Vista, I get the error code: 0xC004F063.

Similar Questions

• When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  Hello

  -Remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   

  Step 2:

  If the computer starts in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

  Step 3:

  If you haven't already done so, I would say doing a full scan on your system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• I use Windows XP and get the error code 0 x 80070424 when you try to use Windows Update.

  When I try to access Windows update, I get an error code 0 x 80070424. I've read many threads, but want to make sure that the solution is for Windows XP

  Try this link

  http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/

• Try to download & install on windows 10 but get the error code 43

  I tried 10 ways to download this product on my laptop windows 10 but I get an error code 43. I went through all the help suggestions and reports of problems page, but the same thing keeps popping up whenever I try to download Adobe (photoshop). Is there a way I can go beyond that?

  Hi Rebeccaw89001821,

  Please see the following links:

  Code 43 error when you install Adobe Creative Cloud

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

• My windows update will not install the new version of windows update, I get the error code 80070020 on a 64-bit vista SP2

  My windows update to install a new version of windows update says it acts like it will download and install it then gives me the error code 80070020 and says that my computer is unable to download or install new updates or new version of the windows update. I have a 64-bit windows vista SP2 and my avira antivirus program that has a real-time protection. I tried to do a clean boot upward and tried every possible tip I found on the Microsoft and through suggested methods help panel, I found. My computer has Avira Antivirus that has real time protection I deleted and tried without that somewhere because he said it could be antivirus programs that include real-time protection. Does anyone have advice good?

  Hello

  1. What are the troubleshooting steps correct you did to fix the problem?

  2 did you a recent software or changes to the material on the computer?

  I would say allowing you to run the FIXIT from the link provided and check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  You can also try the manual steps and check.

  If you follow the manual steps to start the computer in a clean boot state, remember to start the computer in normal mode after you have completed troubleshooting.

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Note: It is possible that some data could be removed if infections are detected.

  Hope this helps and keep us posted.

• How to access the USB secure key on windows vista, I get the message that application 10004 could not find any JumpDrive Secure device connected to your system

  Original title: how access key USB secure Windows vista

  I have a lexar player sure to jump that I used with an old computer that has Windows XP.  I now have a new computer with Windows Vista and I can't access the secure part of the USB key.  When I try to access the part secure the USB key I have the following message "Application [-10004] could not find any JumpDrive Secure device connected to your system. Please make sure that your JumpDrive Secure device is inserted into a USB port".

  Of course, the USB key is inserted into the USB port.  If anyone can help find me a way to access the part secure the USB key I would appreciate it.  Thank you.

  Hi Jon0909,

  The error that you received can be for several reasons. I suggest you try the following steps:

  Method 1: Run the fixit available in the link below and check if that makes a difference

  Tips for solving problems of USB devices

  Method 2: This normal matter as a result of a conflict between the USB and other USB (Universal Serial Bus) connected to the computer.

  (a) disconnect all the external devices connected to the computer to expect the mouse and keyboard, check if your USB key works.

  (b) If this solves the problem, and then add back both devices until you discover the piece of hardware causing the issue.

  If the problem persists, you can contact the manufacturer of the device for any known issues
  http://www.Lexar.com/support

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I turn on my computer desktop-windows vista - I get the message that Multimedia Keyboard Driver has stopped working.

  How can I fix the error message that reader Multimedia Keyboard stopped working.  My keyboard is a

  0817-gateway model # KB.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  If it works fine in safe mode, and then try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Updates to Windows Vista and get an error code 80070426

  VISTA-CAN NOT GET UPDATES OF WINDOWS-ERROR 80070426-HELP!

  Try this:

  1. on your keyboard, press the Windows key + R

  2. in the window that opens, type services.msc and press ENTER.

  3. in the list of services, find software licensing and double-click it

  4. in the drop-down menu, set the startup type of the service to automatic, and then click on apply. Then, click the Start button to start the service. See the screenshot:

  

  5. close all windows and then download the tool for troubleshooting Windows Update this download link:

  Windows Update Troubleshooter

  6. when the convenience store downloads, open it and follow the instructions. When you have finished, try to check the updates again.

• When installing updates for Vista I get the error code 80070490

  Whenever the automatic installation updated it gets error 80070490 and he falils to install all updates

  On what edition of Windows and what level of Service Pack, please?

  (1) you receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  "This problem can occur if there is corruption in component maintenance (EC) manifest."

  (a) run sfc/scannow from a command prompt
  http://support.Microsoft.com/kb/936212

  If the above does not resolve the error...

  (b) download, Saveand then run the update system (or CheckSUR) tool - http://support.microsoft.com/kb/947821

  (c) no joy? To resolve this problem, you can try to perform a repair of Windows Vista or Windows 7 installation
  http://blog.taragana.com/index.php/archive/how-to-do-a-repair-install-to-fix-Windows-7/

  Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the Service Packs and updates that are not included on the installation DVD.

  For Advanced users.

  (2) how to overcome error 0 x 80070490 when installing updates in Windows
  Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Expert MowGreen Windows IT Pro - consumer safety

• is shaded a d I canProblems installation of windows to date get the error code 80070490, tried to install windows vista from DVD upgrade areanot upgrade I can do?

  Windows update installation problems get code error 80070490, tried to install windows vista from DVD of the upgrade box is greyed out and I can't upgrade, any advise?

  Hi, Eve,.

  First run the preparation tool system update for your version of Windows.

  Start > right click on computer

  Select Properties

  Under system > Type system, you will see the 32 - bit or 64-bit system

  Download the tool for your system (x 86 is 32-bit, x 64 is 64-bit)

  http://support.Microsoft.com/kb/947821

  When finished, restart the update.  If the update fails, you will need to repair Windows.

  Your DVD says recovery?  This is the DVD, you will need to reinstall or repair Windows.

  What is the make and model of your computer.  The manufacturers provide a Recovery Utility in many cases.

  Ex: HP provides a Recovery Manager for their computers

  It is found by clicking Start > all programs > PC Help & Tools

  Click on Recovery Manager

  Follow the prompts on the screen to repair your computer

  How to automatically repair Vista using Startup Repair

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

• After the installation of Windows Vista, I get the error message "" windows/System / * ' file was not found "

  Original title: after the new installation of windows Vista it does not work.

  After the new installation of windows Vista on my laptop Lenovo at startup, it displays "windows/System / *" file could not be found... I also tried to fix.

  Hello

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If you continue to have problems with it contact lenovo

  http://www.Lenovo.com/us/en/index.html

• "update for windows vista (KB968389)" with the error code '800 b 0100'

  I'm unable to update titled "Update for windows vista (KB968389)". He always reports an error report with the code "800b0100" every time I try to install it? Can anyone suggest something that I can do to solve the problem?

  Hi TerryJackson,

  If you receive error 800b0100 in Windows Update, it means that a file needed by Windows Update is not registered by Windows correctly. System update readiness tool can correct some conditions that can cause this error.

  Method 1:

  You can try to run the system update tool and check,

  For more information, see the link:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 2:

  You can also try to download the standalone update package and try to install.

  See the link to download the update:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=6d96662c-F061-4907-b9bc-de2a1497dcfd&displaylang=en

  Hope this information is useful.

• Can manage Windows XP Home Edition of Windows 8? Get the error codes for the security updates (0 x 643). ALL through Microsoft Tech INFECTED with the virus and Trojans tried. I need help BADLY. Thank you.

  I tried every thing blessed with technology microsoft... always hanging in limbo here.  Tired of doing constant comprehensive analyses, etc. in order to remove the constant threats.  Apparently my McAfee can't stay with her either.  Need help with the download/repair these seeds as soon as possible.  Thanks to all those who wish to help me - it would be that popular, for sure!

  The question makes no sense.

  "Can manage Windows XP Home Edition of Windows 8?"

  Two problems: there is no Windows 8 and even if there were, Windows XP Home Edition would not not 'manage '.  ;-)

  I drop McAfee for a few different freeware products.  Or better yet I'd get two products 'cost' (~ 25 and 60 dollars) and install them and use them in the future - but WHEN you are trying to clean up.

  You seem like you maybe sincerely - at a time when a format/install of Windows XP/patching/installation of applications/patch/restore backups of your data is the best course of action.

  However, if you are willing to work - maybe we can at least get things cleaned up to a certain point where you can get a good backup before doing this (otherwise avoid doing all together.)

  In the order shown, do not jump (no matter what you do, what you have done in the past, etc.) ...

  First of all - download, install, operate and put to update and then run a full system scan with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Search online with eSet Online Scanner.

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now try usig the Fixit (Yes - try to use it again) to reset your Windows Components Update (you'll do the aggressive version, not the other):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Now, open Internet Explorer, visit http://windowsupdate.microsoft.com/ and do a CUSTOM search for updates.  Install any critical/high-priority ones and - for now - to ignore all those in option (always do this for material updates optional here.)

  Restart if necessary and continue to visit this web page until you have not yet updated to high priority.

  Now - if your problem is with the facilities of the .NET Framework...  You can end up with something like:
  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  to uninstall a few versions of the .NET Framework, then you can try to install again - but you should not do this until the machine is supposed to be cleaned.

• whenever I try to update windows KB972036 I get the error code 80073712

  Impossible to update KB972036 get code error 80073712

  See: Error Message When you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
  http://support.Microsoft.com/kb/957310 TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 - I get the error code 646 in updates are trying to install. There are 5 important updated that keep a failure.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Run this FixIt:

  Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates

  http://support.Microsoft.com/kb/2258121/en-us

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/