When I gave restart my sistem take a long time to restart my windows 7?

THE WEEK LAST I GOT IT IS VERY SLOW MY SISTEM GIVE THEN RESUMED MY SISTEM

THEN I COMPLETED THE GET RECOVERY TO COMPLETE MY SISTEM AFTER YET ALSO GET VERY SLOW REBOOT WHEN I GIVE THE REBOOT?

Autoruns for Windows

http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx>

Troubleshoot your PC speed

http://www.ComputerActive.co.UK/CA/PC-help/2038187/solving-PCs-speed>

Optimize Windows 7 for better performance http://windows.microsoft.com/en-us/windows7/Optimize-Windows-7-for-better-performance>

Open the troubleshooting of System Maintenance utility

http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter >>

`~`

The current time and the date now in Baja California (border region), the Mexico is

21:29
Thursday, May 16, 2013
The time Pacific daylight time (PDT)-0700 UTC
 
UTC/GMT is 04:29 Friday, May 17, 2013
            
Current weather conditions in Tijuana

Cloudy15 ° C / 59 ° F

Tags: Windows

Similar Questions

  • Take too long time to come for Windows

    Hello

    I have Pavilion g6-2031se and of the last two days it takes too long to come to Windows. I faced this problem for the first time and I do not use my notebook for Skype, Facebook and only very light work. Can someone help me with this?

    Thank you

    Ganga

    @Ganga,

    No worries, I would like you to try a clean boot. This allows the computer to boot without unnecessary programs or offers to start with it.  When you open this document of croll to the section "How to perform a clean boot" once listed there to expand the section for your operating system to get the appropriate instructions.

    Once you have made the appropriate changes, restart the computer at least 3 times and see if you notice a difference not how long it takes to start.

    Please answer as soon as possible.

    Thank you

  • T400 takes a long time to start after windows updates

    Hello

    I have a T400 I had to reset to factory settings (2008). After the reset, I started to download and install all windows updates. For a set of updates, after restarting the computer my T400 started taking some 10 minutes to start. She continues to do more another week later after you have installed all updates. The screen goes black for 10 min and then I get the screen of Thinkpad and wihtout a problem starting windows.

    Can someone tell me what could be the problem? How can I tell that update is the cause and uninstall it?

    Thank you! Lore

    Sorry:

    No I do not recommend a BIOS update.

    I think you DID an update of the BIOS via the update system and now the BIOS needs to be initialized.

    Only go in the BIOS, press F9 to load defaults F10 - Yes

    If this does not help, remove the battery of the BIOS for a few minutes.

  • Satellite M300 PSMDCA takes a long time to start

    I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

    First of all, when you start the computer, it takes a long time to start and activate Outlook.
    I am running Windows 7Home Premium.
    Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

    Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

    Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

    Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

    Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
    Quite often when scrolling on the websites of the page I'm going to freeze?

    I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

    Any thoughts? Thanks, Shirl51

    > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

    This nonsense!
    The system should boot up quickly my laptop needs 30 seconds to start.
    In my opinion, the system is screwed

    In your case, I recommend to reinstall the system.
    Did you create the recovery disk?
    If this isn't the case, I think that detailed instructions should be placed in the user's manual.

    After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

  • Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

    Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

    Hello C Johnston,

    Did experience you these issues when streaming video from any other website?
    It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
    You might try to optimize Internet Explorer to see if it helps at all:
  • How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish?

    My problem is? How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish? Example I have Microsoft Security Essentials set allow to run daily on 1200 AM and until he finishes my computer goes to screen saver Mode. and when I click on my mouse, I must sign completely new in my computer > how to stop this from happening, I want to keep my Security Scan open until there finishes?

    All the solutions for this?

    Original title: Windows Vista systems

    Hello

    This can help you:

    "Enable or disable the screen saver.

    http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

    And this is how do to change the time to wait before the screensaver comes on (article 8) and how to disable the password to logon to him (art. 9):

    http://www.Vistax64.com/tutorials/85539-screen-saver.html

    "How to disable or enable Protection by password on Wake Up in Vista"

    http://www.Vistax64.com/tutorials/102686-password-protection-wakeup.html

    See you soon.

  • Z10 Z10 Blackberry BlackBerry takes a long time to start when the parameters "SIM card PIN lock" is activated

    Device: BlackBerry Z10
    Model: STL100-1
    Software version: 10.2.1.537
    OS version: 10.2.1.1925
    Carrier: Beeline (KZ)

    Z10 takes a long time to start when the parameters 'SIM card PIN lock' is running

    Tried to activate or disable this setting, the result:

    On - 5 min 13 sec (on-screen progress bar has reached 100% for ~ 1 minute, then waited for another 4 minutes in this State)

    Off - 1 min 17 sec

    What is the problem of the time difference?

    Good, thanks

  • Pages take a long time to load in versions 6,7 and 8, version 5 works fine.

    Version 5 works fine, when I updated to 6.7, and now 8, pages take a long time to load. It's on 2 different computers, one with Vista, Windows 7 other. If I restart Firefox it helps, but the problem comes back. Does not happen with IE or Opera.

    The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

    Try to decrease the value of the pref Network.http.Max - connections 256-30 such as used in versions of Firefox 3.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

  • desktop computer takes a long time to load after uninstall of netware

    Dear Pascal, recently, by chance, I installed the client service for Netware on my PC. He asked to restart the computer, and after reboot, logon screens became classic. I uninstalled netware by accessing the properties of LAN. I managed to restore logon screens using Microsoft resources available on the net. However, my PC now takes * for long time for the desktop icons and toolbar are displayed. I use Microsoft Windows XP Version 2002 SP3, Intel Core2Duo processor P8600 @2.40 Ghz with 2 GB of RAM on Lenovo Thinkpad R400. I understand that it is after uninstalling the netware client that my office is very very slow. Help me for a faster loading of the desktop computer. Best regards, Reba Shankar

    Hey Reba,

    Thanks for choosing Microsoft Community!

    You have reached the right forum. Try to solve this problem.

    If I understand correctly, you have some performance issues on windows XP computer.

     

    Let us try the following steps:

     

    Method 1: Any installed program must be uninstalled from Add and remove programs. You can just remove shortcuts from other places like LAN properties.

    Run the following fix - it to uninstall client services for Netware.

    Solve problems with programs that cannot be installed or uninstalled:

    http://support.Microsoft.com/mats/program_install_and_uninstall

     

    Method 2: See the following article:

     

    How to make a computer faster: 6 ways to speed up your PC:

    http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=uQRRD6ZPxkC

     

    Important notes:

    ·         Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

  • Starting the server takes a long time due to the storage of JMS persistence files

    Hello

    We use WebLogic 9.2 on a windows machine.
    Recently, we have improved our request to work with JMS.
    We are on 2 different servers in a cluster using 2 JMS servers and works with distributed destinations.
    We use file storage as our persistence store.

    Recently, we found boot server takes a long time because of the actions that are performed on the storage of files.
    Analysis of this problem, we have seen that the size of the file is of ~ 2 GB.
    We understand that the file size does not fear (unless it is compacted manually), and its size matches the largest number ever of pending messages in the queues (as a mark of high tide).
    We shot also store debugging, using weblogic. Debug.DebugStoreIOPhysical and we saw a lot of recovery after newspapers file storage is open.
    We have checked and checked our JMS transactions are completed successfully. We also checked that the current messages and number of courses is 0.
    We stopped the server gracefully, check that there are no messages pending.
    However, several times takes start server ~ 30 minutes due to heavy work on the persistence store.
    Compaction or remove storage of files eliminates the delay.
    However, we want to avoid the manual operations whenever we want to start the server.

    Please share your ideas.

    Thank you
    Itsik

    The only suggestions I have off the top of my head are:

    * Ensure (1) the host system has at least 2 GB (the store file size) memory physics in addition to the memory used by the current process, and (2) the host system is not rebooted between each restart WebLogic. If you ensure that both of these, then the operating system puts implicitly cached content of the file of the store in memory even between boots - when WebLogic starts subsequently storing files, the o/s should be the content of the file much more quickly.

    * You can move to a JDBC store. Runtime JDBC store performance are lower, but since you have generally has only a small amount of records to retrieve, startup performance should be higher in this case.

    * Not that it helps your case, but it happens that we have significant performance improvements of starting process for a future version (if all goes well a near future release).

    Tom

  • Firefox takes a long time to close since a recent update and memory of pigs.

    Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

    Upgrade your Firefox 9 browser and check

  • The system preference takes a long time to load

    As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

    Data sheet:

    iMac (end 2013)

    Intel Core i5 at 2.7 GHz

    8 GB 1600 MHz DDR3

    1 TB 5400 RPM HARD DRIVE

    Intel Pro Iris 1536 MB

    I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

    I suspect that it is a function of low priority in the memory compressed algorithm.

    Upgrading to an SSD and it will rise to attention.

  • XY graph sometimes takes a long time to update legend

    Hello

    I wrote a small piece of code that highlights (changes line width) the plot on the graph when we click a mouse on its name in the legend of the plot. The code works well except when I the legend scroll bar is visible and its position is not 0, then when I click on the name of the parcel, the chart takes a long time(>4s) to change the width of the plot on the legend. The plot on the graph is updated instantly. Its only the legend of the plot that takes a long time to get updated.

    I enclose the code here... Please, run it and see if you also see the same behavior.

    Thank you

    Ritesh

    Hi Ritesh,

    The patch of f2 is already released. http://www.NI.com/download/LabVIEW-development-system-2015/5656/en/

    We will inform you of the R & D of your first question, but unfoturnately we cannot provide information on future products releases.

    Kind regards

  • videos take a long time to buffer

    There are a few dat I could watch fine Inc. and now it will take a long time for the buffer viedo and still have problems

    Hello

    1. what operating system is installed on the computer?

    2. what version of web browser work?

    3. do the same thing happens with all the videos that you try to play?

    4. I think you are referring to the videos online?

    5. How do you try to play the video?

    If you use Internet Explorer and facing problems, watch videos online, then you can check out the link below:

    The video problems when you use Internet Explorer

    http://support.Microsoft.com/kb/2532294

    Note:

    There is no option within the operating system to increase the speed of buffering. Only way to increase the speed of buffering in some measure is to have a connection with a higher bandwidth. But note that as does you not an option of continuous play in CD or DVD.

    Another work around that I do personally is to pause the video to complete the buffering and watch the video once the buffering completed.

    I hope this helps!

  • My CPU runs at 100% without no reason and programs take a long time to open.

    A FEW TIMES WHEN I TRYING TO OPEN A PROGRAM FOR EXPLORER MOMENT HE TAKES A LOT OF TIME IT OPENS

    original title: RUN MY CPU to 100% BY MOMENTS AND PROGRAM TAKES a long TIME TO LOAD what COULD BE WRONG

    Hello

     
    You can try the steps in the following link and check if it solves the problem:
     
    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
     
    I hope this helps!

Maybe you are looking for