___When I have a file I multi page and "Save as", he saves more than just the page that I was clear

Similar Questions

• my icons have all changed to DPIsnt icons and don't launch, they give me just the Wizard installation device driver, how to solve this?

  my icons have all changed to DPIsnt icons and don't launch, they give me just the Wizard installation device driver, how to solve this? It won't let me continue with the wizard, I tried to launch a game through this program (the game needs a program to help him run and stupidly, I thought it was the right one) now each icon has changed and I can't access anything chrome atm, im a novice on computers so a guide idiots to solve this would be much appreciated Thank you very much

  Hello

  Did you make any changes before the show?

  Method 1: Run a virus scan to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Icons change incorrectly in Windows

  http://support.Microsoft.com/kb/2396571
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows.

  Method 3: When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows.

  Let us know if that helps.

• I have a Presario cq 56 laptop and tried to close for more than two hours now,

  You please tell me what can I do to fixs that problem. I got this laptop in July 2011, new in boxes.  I have Windows 7 Home Premium

  want to stop!

• I have a no scanable multi page PDF text. I want to finish with a multipage PDF text scanable,

  I have a no scanable multi page PDF text. I want to finish with a multipage PDF text scanable,

  the only way I found to do it is via acrobat

  (1) open the PDF and save as on the other TIFF

  (2) combine TIFF in acrobat

  (3) text recog the newly combined file

  4) Save as PDF

  It works, but I is a tedious process of multi steps.

  I wonder if there is a way to automate this, so do not human intervention?

  Without human intervention?  Not with Acrobat.

  Be well...

• Using PhotoShop elements Version 9.3 14?) : I have a file I've flattened and now want to resize now.  When I try to resize the size of the document from inches to Pixels.   When I choose to change - there is no other choice "Pixel".  I'm in., Points,

  Using PhotoShop elements Version 9.3 14?) : I have a file I've flattened and now want to resize now.  When I try to resize the size of the document from inches to Pixels.   When I choose to change - there is no other choice "Pixel".  I'm in., Points, cm, but no Pixel option.      I have the following options checked: resampling, constraint proportions, scale of Styles.

  The plan was to add a frame of 60 pixels around the 5.56 a picture and then framed 8 x 10 x 7.

  Go to Image > resize > canvas size. You should be able to find the scale of the pixel in the menu dropdown.

• I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  original title: why isn't my laptop recognize the eathernet link?

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
  then the SATA, Audio, USB, LAN, etc, drivers.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Logitech C920 sequences is more than double the size of the original file

  Hi all

  I'm very new to adobe Premier Pro and I am just a little overwhelmed by the software. Here is my configuration of curect.

  Webcam: Logitech C920

  MIC: Blue Yeti

  I record video using OBS and it generates a file in the MP4 format. About a 10-minute film is at most 200 MB. Now, when I go to edit the clip in Premier Pro I understand that I must first begin a new sequence. This is my first problem: there is no predefined sequence that matches the C920 Locitech. So for now I'm just drag and drop the file into the time line. Is this correct?

  I can do the basic changes for now and that's fine, the problem comes when I go to export the images. I used H.264/Custom upstairs (MP4 format), I leave everything as it was. only 2 things I edit are the maximum and minimum flow for 10/16. I also check the box use overview at the bottom (I think that's what it was called) now when I hit Caryl export my PC Suite for about 10/15 minutes and give me a file that is about 700 MB in size. This is more than double the size of the original file. Why is this?

  If there is more information you need, I'll do my best to advise.

  Thank you

  If the C920 clip is the first clip you fall into an empty timeline, first expected to ask if you want to change sequence settings to match the clip (unless it is already). To be sure, simply right click on the clip in the project bin and select new sequence of the Clip and they will match for sure.

  The size of the exported video file is dictated by one thingand it is not frame size or frame rate - sampling rate is what determines the size of the file. If you want to halve the size of output file, you will need to reduce the flow rate by half.

  Rather than using Custom, maybe find a predefined existing H.264 which you gives the combination of quality and size of the file that you like? Make sure that the size of the image and the frame rate matches the source. How do you want to display or distribute material - on computer, on a device, online?

  I do not use the option use the previews - that means you take a temp make file and redisplay (transcoding) there again, adding a new generation of compression loss. By not checking this box, first visit the direct export from the source element format, by cutting out the middle man. I do not have a clip that is so effects loaded it will not play in the timeline panel to check the results, I don't bother making anything green. Everything is done at time of export anyway.

  Red, yellow and green make bars and what they mean. First work Pro area

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Cannot disable the CS6.  Have disabled successfully recently because of computer problems.  Is there a limit to the time that you can disable?

  Cannot disable the CS6.  Have disabled successfully recently because of computer problems.  Is there a limit to the time that you can disable?

  Hello

  I think to delete the content in the files SLCache and SLStore files should work for this.

  Concerning

  Jitendra

• Copy the files/etc/passwd and/etc/Group from your ESX Server to the machine that you want to use as map server

  I'm trying to set up an NFS share on my windows server so that I can do vMotion.  I have 2 ESX servers that will access the storage location so that I can vMotion the content on an ESX Server to the other ESX Server.  I came across many discussion forums who say I need to "copy the files/etc/passwd and/etc/Group for your ESX Server to the machine that you want to use as map server"... How can I copy these files onto my ESX Server?

  I am VERY VERY new to VMware and will need step by step instructions on how to do it.

  Thanks in advance!

  Hello

  Try this http://vmetc.com/2008/02/19/create-a-nfs-share-for-vm-iso-files-with-windows-2003-server-r2/ and this

  http://ITKnowledgeExchange.TechTarget.com/it-consultant/Configuring-NFS-in-Windows/

  To copy the files everywhere I would use WINSCP which based a gui app secure copy, which should make it easy to copy the file into the Windows box

  Concerning

• I have about 25 mail in my email application, but he needs more than 2 GB of memory

  I have about 25 mail in my email application, but he needs more than 2 GB of memory. What could be the reason. Thanks in advance

  You have email stored in the junk e-mail folders?

  If you do this may be the question that is being established.

  Max

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)

  Hello

  I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:

  http://support.Microsoft.com/kb/310123

  It will be useful.

• I have installed autodesk inventor 9, 2002, and it is not working properly it gives an error that there is a problem of compatiability. Is there something I can do to correct the problem of compatiablity?

  I have installed autodesk inventor 9, 2002, and it is not working properly it gives an error that there is a problem of compatiability.  Is there something I can do to correct the problem of compatiablity?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Hello! I have an Adobe Creative Cloud membership and was under the impression that I was allowed to host 5 free sites through Business Catalyst. However, when I launch my site built in Adobe Muse CC by Business Catalyst he orders to buy a h

  Hello! I have an Adobe Creative Cloud membership and was under the impression that I was allowed to host 5 free sites through Business Catalyst. However, when I launch my site built in Adobe Muse CC by Business Catalyst he ordered to buy a hosting package. Can you please explain what is happening here, and how can I use my free hosting?

  5 free sites ended. It is not available from the CC and more.