When I plug it in the optical adapter and cable for Mac book and the receiver no sound?

Similar Questions

• Receive error code 43 Tom tom 630 gps when I plug it to the computer

  Original title: tom tom gps 630

  My tom tom gps 630 does not respond when I plug it to the computer to update, it says that Windows has stopped this device because it has reported problems. (Code 43) I don't know what to do. I'm trying to fix the problem but nothing works, I bought a new usb card, but it says the same thing, please tell me what to do.

  Hello

  Follow the steps below and check if it helps.

  Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) plug the device gps tom tom 630 and perform a test to ensure that the problem is solved.

  For extra support, try to contact the Support of Tomtom site and check if it helps:

  http://www.TomTom.com/support/support.php?id=3

• Where the modem for Mac book pro

  Where is the modem for Mac book pro? Internally or externally? The modem n time machine the same?

  There is no modem. Please explain in more detail what you are trying to do and what you think, what is the modem. Time Machine is a backup program.

• Qosmio F50 - LEDs start blinking when I plug it in the socket

  Recently, when I plug in the mains, the LED on my Qosmio F50 start flashing, as well as the led battery... the only way to prevent this is to plug the laptop before starting...

  Can someone explain what this can be?
  I guess that there may be something wrong with the output power of the adapter?

  Hello

  Do you mean that the LED flashes only if the F50 was executed with the power of the battery and then plugged in the area?

  Hmm generally battery LED starts flashing if the battery power is low and must be charged.
  The power led blinks if the output voltage of the AC adapter is abnormal or laptop power outages.

  The other LEDS shouldn't flashing orange t
  But if it comes to a case, then there must be something wrong with electronic power supply or something like that maybe the technician should check

• When I plug my headphones, the sound always pregnant. What should I do to get the sound to come through the headphones?

  I have a laptop HP with Windows 2007.  I can not access my helmet.  I have Plug and always sound speakers.  What I am doing wrong?

  Hello

  ·         The headset works on different computers?

  ·         When is - this problem started?

  Check if your headset is set to use as the default value * Communication * device instead of the default device, or if the two devices are configured by default. If so, do the default headphones, so that Windows will use only when they are connected to follow the steps below:

  Check volume settings.

  a. right click on the speaker icon in the taskbar, then select volume control options.

  b. put a check mark on "all devices evolving sound.

  c. make sure you have "Default uncontrolled communication device".

  d. place a check on the speakers and headphones.

  Also, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• I have a Samsung Galaxy S II and when I plug it into the computer it says Hardware Id missing

  I was able to connect to the computer and open its files. But now my computer says the missing hardware ID. What should I do?

  Hello

  1. are you able to connect other devices on the computer?

  2 have you tried to plug the device into the other USB port?

  3 have there been recent changes to the computer before the show?

  I suggest you to try the steps below and check if it helps.

  Method 1: Rof the Nations United the corner hardware store and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  You can also read the article and try to run the troubleshooter to check if it helps.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Method 3: If the problem persists then I suggest to uninstall and reinstall the software for Samsung phone on the computer.

  Uninstall or change a program: http://windows.microsoft.com/en-us/windows7/Uninstall-or-change-a-program

  http://www.Samsung.com/au/Smartphone/Galaxy-s-2/software-updates.html

  Hope this information is useful.

• My iphone screen has gone completely blank. I can still talk to Siri via activation of the voice and the phone still makes a noise when I plug it into the charger, but the screen does not respond.

  white screen

  Try a forced reboot. Hold the home button and power at the same time until you see the Apple logo. About 20 seconds or more.

• My iPad battery is dead, but when I plug on charges that he turns and back again is there anything I can do about it?

  my iPhone died and now won't turn on help!

  You let your phone plugged in for at least 10 or 15 minutes?  If fully discharged, an iPhone will turn back not for a while until it is recharged slightly first.

  If you have left it plugged for a while yet he still comes on, then it is probably not supported.  Check your charging cable, charger and that it is plugged into the power outlet is actually feeding.

• Error when you try to add my HP photosmart C4600 to my Mac book pro

  I tried to print the test page, and he did. But I had the problem when I'm tring to print a document or a page Web etc. He asked me to add the printer and it saids

  "An error occurred while trying to add the selected printer.

  Successful-OK-ignored-or-substituted-Attributes ".

  He used to work smoothly on my PC, but now it happens right on my new Macbook Pro. My Mac is OS X 10.7.3, and I tried to reinstall the HP printing software that was provided as a disc when I brought my printer and it still does not work.

  Download and install this: support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• When I plug the headphone in front back, it shows me all the time "line in"

  .. and manually I put on headphones and then I hear of helmet, after computer to start again I have to do the same thing and here again I can hear the voice of helmet,

  I have separate headset, mic is good and shows jack rear panel but helmet appears and when I plug it into the back of the helmet, it shows online and I don't hear voices, so I manually check the headset option each time you start...

  PL. Help me

  Hello

  I suggest to set of speakers as default device and plug the headset, when you want to listen to music through headphones and connect the speakers when you listen through loudspeakers.

• The computer crashes when I plug in the ethernet cord

  I'm having a problem with my laptop. It will start and run fine without the ethernet cord. As soon as I plug it to the computer, a window appears and tells me that Windows has experienced a critical error and stops. If I unplug the power cord, it works very well after the restart. Please help me I am not getting any other error codes or messages, so I don't know where to turn. I ran malicious code detection and McCaffe and no solution to my problem.

  Hello

  When you plug it in, the network card to become 'in service', the software support and drivers and the loading error occurs. This probably indicates a problem with the network card drivers. Download a new game from the manufacturer of the laptop and install to see if refreshing their help.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• I got electrocuted when I plug a monitor and touch the fingerprint reader

  Hi all

  I'm always a little electrocuted when I plug a monitor to my E420 and touch the fingerprint reader digital (I was barefoot). I tried all the monitors in my house and they are all the same. Hook up a monitor will damage my ThinkPad?

  Thanks in advance.

  Kind regards

  Haris

  I can finally overcome this problem by using a wire and a nail as ground. Thank you all!

• envy15: sound does not work when I plug my HDMI port monitor

  I have a new HP Envy15laptop and an older AcerAC2016W with VGA connection.  I bought a cable adapts hdmi vga.  When I plug my monitor, the noise stops.  If I unplug the monitor portable speakers work fine.

  Hi, l

  I do not know what VGA to HDMI Cable you speak but VGA does not carry sound and your machine can judge use HDMI audio so it stops sound with HDMI, if you want to use the sound on your computer, you should disable the HDMI sound:

  Right click on speaker icon > devices back select Play

  Select use internal sound and turn off the HDMI sound (if it is there)

  You will need to enable when using pure HDMI (IE HDMI to HDMI TV for example)

  Kind regards.

• Satellite C670/C670D - its weird when I plug my headphones

  Hi all

  Mainly, I sorry for my bad English, but I have some French and this post was traduce with google translate.

  Here, for 2-3 days when I plug my headphones on my PC and I am trying to listen to music it makes me lots of bass, the instrumental... And down a bit, you can hear the voice of the singer. It is very annoying, because it is not terrible.

  _Information Laptop_: Toshiba Satellite C670/C670D.

  _Solutions I tried_: (in order of trial)
  -Check if the problem is not the cable or the headphone connector.
  Comment: The headset works perfectly on my phone with the same music, or even the laptop of my little sister who is exactly the same as mine.

  -Go to control panel > sound > property on the audio output > level > balance > back to 0% on the left or the right.
  Comment: The voice is back, I can hear the music perfectly, but now I hear a team of very strong of the headphones, the difference between the two when I wear this sense the helmet of two "ears." More when I unplug my headphones, I can hear more on one side of the speakers built-in to laptop.

  -Check the "Cancellation of the voice" option is not checked in the property of her.
  Comment: The option is not enabled when the headset is connected and that one side is 0% as it is an I had not set aside 0%.

  -Perform a system restore to a date prior to the problem.
  Comment: The problem has occurred since 31/01/2013. I'm back on the date of 29/01/2013... In vain, always present!

  -Check the update driver 'Realtek '.
  Comment: I went on the site "Ma - config.com" where I found an updated driver after the hardware detection. Once the update made the same problem again and again.

  I get annoyed by this problem that do not allow to appreciate the quality of my helmet on my PC. In addition, the problem is with either the Windows, on Youtube, on VLC disk...

  If anyone can solve my problem.

  Thank you in advance!

  Sincerely,
  Drama

  > The problem occurred since 31/01/2013
  And what have you done so far? Have you installed or changed something?
  I mean that the problem cannot occur without any reason.
  I never had such a problem and don't know what can be the right solution, but try to reinstall the sound driver and copy the driver from the Toshiba download page.

  Check first and then post comments.

• Xperia Z2 orange flashing led when it is connected to the magnetic charge lead

  Hey guys. I bought this phone off of a friend. His three months and works very well. But the other night, I accidentally put the magnetic port on the back and the phone is completely dead. I panicked and I tried every possible combination. I finally got a red when I plugged it into the microusb port. He turned in 10 minutes as usual.

  Now, whenever I have fix the magnetic cord (correctly) I get a flashing led orange and the unit charge at all.

  What is the flashing orange led average? Warranty covers the magnetic port? I hope someone can help me

  Hello everyone. I have problems with the magnetic charge on my Z2 port. He simply not to charge the device. He also was heat when he was in charge via USB. Sometimes, it would not even load!

  I was trying to just live with it until one day the phone turned off and never started upward for about a day.

  I knew at that stage he had no choice but to request an RMA number for these issues.

  When I called to tell them my problems, I told them specifically 'THERE IS a PROBLEM WITH THE MAGNETIC PORT', 'THE PHONE REFUSED to LOAD SOMETIMES' and 'THE PHONE HEATS DURING CHARGE'.

  The representative on the other end told me several times that he understands the problem and they will be addressed when he arrived at the repair shop.

  So, I packed the phone upward and expelled from Ontario (shipping cost me $40) and thinking that once he comes back, it'll work like it should.

  ---

  It's where I've never been more wrong.

  I'll be back on the phone today and it opens as soon as I could.

  First thing I did, is trying to turn it on. Absolutely nothing. No light, no low battery screen, nothing.

  So when I got home, I plugged the thing in a USB AC charger. The first 10 minutes, that there was only one red LED and nothing else.

  After 10 minutes, I could see the green of the battery on the screen.

  Again 5 minutes later, I was able to turn the phone on. He was sitting at 2%.

  What makes me believe that the phone was left or COMPLETELY discharged before shipping. These people in repair facilities don't know how harmful it is for a battery to be discharged to comepletely?

  ---

  The second and most outrageous of the thing is the main reason for the phone was sent he was not yet fixed!

  I tried to plug in the charger magnetic port (with a spare cord, as well as the docking station) and the phone does EXACTLY the same thing!

  In fact, it is an exact quote from that work says:

  "THE PHONE IS IN CHARGE AND WORKS WELL. "PLEASE SEND TO THE CABLE USB AND CHARGER IF PROBLEM P-<- they="" didn't="" even="" finish="" the="">

  "Software update, direct call, past quality control."

  I am so totally outraged and disgusted with Sony now.