When I reset my apple ID and password for the new computer, it does not start installation
When I reset my apple ID and password for the new computer, it is as I entered the wrong password. This happens time and again @
My problem was solved, thanks anyway.
Tags: Flash Player
Similar Questions
-
32-bit vs 64-bit processors, and recommendations for the new computer operating systems
This message can be duplicated... because I posted in laptop - forum.
I'm in the market for a new desktop computer and want to do a lot of video editing (using Roxio and Vegas Movie Studio). I want to know the specifications to ask. I need to know if it is better to get a 64-bit operating system processor AND... OR... a 64-bit processor and a 32-bit processor or should I just stick with 32-bit systems? I'm afraid that my drivers and existing software may not be not compatible with 64-bit processors. I want a system that will be able to also change the HD videos.
Any help with explanations would be appreciated.
Thanks in advance.
Hi lcdrdan,
I use a HP Elite d5000t with Vista 64 bit and I have Vegas Studio 9 installed and it works great. The specifications of the box didn't say it works with Vista 64-bit, but it does.
-
I have a new PC and want to install Acrobat on it but cannot find a version upgrade. I can't find the original software. Since I already paid for Acrobat, I would like to reinstall on my new PC and upgrade to the latest version. I don't want the Cloud version and am ok if the latest version of office is not the latest version of cloud. How can I do this?
Hello
Where you purchased this product, if Adobe would then request make you to "adobe.com/getsupport. Connect using the credentials, and then select the option 'always need help contact us' & login to chat.
The chat expert will help you with tools & look in your account
Kind regards
Christian
-
After I reset my Firefox browser"remember password for the site" options is disable.
After I reset my Firefox browser"remember password for the site" options is disable.
Hello karim138, firefox will not save your passwords when you put to execution in permanent private browsing mode ("never remember history" in options > Privacy panel).
-
I don't remember what my password for the administrative account.i did not a password reset disk. AlSi o do not have a disk to recover. How can I reset my password or put on the administrative account?
If you have forgotten your password, if you have another user who has administrative privileges account you can log in to that account and change the password of your account of origin of the user accounts applet in Control Panel. If you do not have another account like this set upwards or that you do not have the password which you will need to log on to the built-in Administrator account. In XP Home, start the computer in Mode safe. This, by repeatedly pressing the F8 key as the computer starts. This will put you in the right menu. Navigate using your arrow up; the mouse does not work here. Once in safe mode, you will see the normally hidden administrator account. The default password is white.
In XP Pro, you don't need to go to Safe Mode. In the home screen, do Ctrl-Alt-Del twice to get the classic Windows logon box. Type in "Administrator" and the password that you assigned when you set up Windows.
If you reset the password of the account administrator integrated into house or have Pro and don't remember the password, use NTpasswd to change the password of the built-in to a white administrator account. Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.
http://home.eunet.no/pnordahl/ntpasswd/
Then, go to the user accounts applet in Control Panel and set passwords that you remember and other changes. WRITE THE PASSWORDS DOWN AND PUT THEM SOMEWHERE YOU WON'T LOSE THEM.
MS - MVP - Elephant Boy computers - don't panic! -
This is a silly question, but I'm not too tech savvy. I don't know I have changed something somewhere. I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research. This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return? I did a reset to the original values Apple TV and it did not work. The tvOS is 9.1 (13U85).
Try to understand the issue.
Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3? You can attach a screenshot?
I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...
-
I bought lightroom in 2010 and have the serial number and a new computer. When I downloaded the latest version and typed in the serial number, it does not work. I bought at the origin of the creative suite. Any suggestions?
Your serial number works only with the EXACT product and the purchased version
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
-you will need to enter your original serial number during the installation for non-Cloud programs
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
- and also read https://forums.adobe.com/thread/1146459
-
I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.
Hello Varshil07,
Thank you for using communities of Apple Support.
If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start. To start, I suggest that try you to start in safe mode by following the instructions below. For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.
Choose the Apple menu > shut down.
After your Mac stops, wait 10 seconds, then press the power button.
As soon as you hear the startup tone, hold down the SHIFT key.
You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.
Release the SHIFT key when you see the gray Apple logo and progress indicator.
To exit safe mode, restart your Mac, but no press during the startup.
OS X El Capitan: start in safe mode
Have a good.
-
Windows XP SP3 problem
Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.
This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. " I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?
It's certainly interesting!
If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:SHOULD work!I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:and try the SP3 Setup file again.But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:1. have you safely backed up ALL your data?2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact. -
Connected to the new router, but locally only.
Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
BASICALLY,.I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)
I can connect if I use a cable, but its disadvantages.
I can connect wirelessly with my PC and Ipad. and Internet access.
I TRIED:
Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »Thank you in advance and we hope you can answer this soon!
I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.Hi Bryyaan11,
You can check out the link to HP support and try to download the drivers for your wireless card updated:
For more information, you can also consult the following article:
Updated a hardware driver that is not working properly
You can also check the following items and try the steps:
Windows wireless and wired network connection problems
Solve problems, find wireless networks
Hope this information is useful.
-
CAPTCHA does not. have tried all the solutions support and installed the new FF. still does not. Help.
Try creating a new profile as a test to check whether your profile is the source of the problems.
See "basic troubleshooting: a new profile:
There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.
See:
-
Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.
Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3
I hope this helps...
-
I install the game install the patch but it does not start, just flashing screen and that's it. has tried everything what is possible. D what can I do to read. ?
Wednesday, April 15, 2015, 17:56:29 + 0000, PhilipMallard wrote:
I bought a Windows 8.1 today and wish I hadn't! It's a pain to use (I had a Windows 7 previously). None of my games of Cossacks work on windows 8.1 either and I've tried them in compatibility mode. Is it possible to install Windows 7 on my new computer and replace the disastrous 8.1 version?
I would like to point out something that you may not realize: Windows 8
has two interfaces; the modern/Metro Interface (which may be all the)
you have looked at) and the traditional desktop Interface. You can use
one or both. This traditional desktop Interface is almost
identical to the interface of Windows 7. the biggest difference is that
There is no Orb start clicking to bring up the start menu.But note that you can get the ORB start by using one of the many
third-party programs, are free or very cheap (the classic interface
http://classicshell.sourceforge.NET/ and debut8 to
http://www.stardock.com/products/start8/; my personal preference is
Debut8, but they are both very good). And goes from an interface to
the other is very easy; There are several ways, but simply by pressing
the Windows key is perhaps the easiest.Just install one of these two and using the traditional desktop computer
interface may be a better choice for you than going to Windows 7.
I use Windows 8, almost exclusively with traditional workstations
the interface and with 8 Start installed. If you were to look at and use
my computer, you may have a hard time realizing that it is not
Windows 7.
I also recommend to read "how to make Windows 8 or 8.1 watch and.
Want Windows 7 "to http://www.howtogeek.com/elk/298/45121/4206
I can't address the issue with your games, except to say that
whenever you move to a new version of the operating system, some of
which is used to run on the former does not work on the new. And it's
much more likely with utilities and games with companies
applications. -
Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.
Any ideas out there?
I know the pro 2 surface is not the real model, but at least it should work fine.arwinq,
You can see the system requirements, including the maps here.
https://helpx.Adobe.com/Illustrator/system-requirements.html
but I fear that you may be taken in this GPU issue described by butz in post #13 here:
https://forums.Adobe.com/message/7773402#7773402
You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.
-
Adobe CC will not update my Photoshop and Lightroom for the new 2015 CC, it fails at 43% every time and gives an error code 50.
Hi Gregory,
Please refer to the threads below to resolve the error code 50:
Which is updated CC 50 error Code?
Setup error - code error 50 creative cloud.
You can also try to download the app from the link below:
Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools
* Be sure to read the important Instructions before downloading *.
Kind regards
Sheena
Maybe you are looking for
-
iMac late 2012 edition hangs on reboot after installing Sierra
I installed on my iMac, edition end of 2012 Sierra, and now it crashes when rebooting and turns off (black screen). It has worked very well since the upgrade to Sierra yesterday, but this morning I rebooted and the iMac stop at Midway through the boo
-
How to unlock the phone with broken screen?
The screen on my Keon is broken. Fortunately, it still meets the touch. Just in case, I wonder: How would unlock my Firefox OS phone if it no longer meets the touch? I'm running 1.3 on my Keon, and my flame (always good screen!), it's the 3.0 nightly
-
Not getting no not signin completion of Norton
Recently, I followed all the instructions to get the latest Norton toolbar and the last work of Firefox. Norton is currently enabled. I have a problem when it comes to AutoFill areas username and pswd of any page I saved information for. ? Can anyone
-
Portege 4010: No Standby Mode and Hibernate mode
Dear people, After you have reinstalled my P4010, I don't have the standby and hibernation Mode option more. I use Win XP pro, SP2, version 2002 Any suggestions? Kind Ragards,Jasper
-
Push button that gives data: how to store?
Hi, I have a set of buttons in LabVIEW, everyone gives me a decimal number which is supported at the end (press the X button and its value is waiting, when you press the button, the value changes with the new number)... I want to make a sequence of N