When I restart and press f8 to go into safe mode, I can't scroll to the top I use the arrow keys, but she will not go up
It shows the possibility to go in safe mode, but I can not just ride to select
Try using the arrow keys on the numeric keypad (key '2' and '8'), but for those to work, your "Num Lock" must be disabled. (Press the NumLock key, until the light Verr off Num).
If this does not work and you are able to boot into normal mode, you can configure so that it starts in safe mode using "msconfig":
Start-> Run-> "msconfig".
Start msconfig, click on:
Win.ini (tab)-> and then place a check mark in front of "/ SAFEBOOT"-> click on 'OK '.
Restart your computer.
He will then start safe mode.
HTH,
JW
Tags: Windows
Similar Questions
-
My card has been replaced on my Mac and now my CS4 won't open. I have re-uploaded, gave the serial number, but it will not always be open. He said that the license has expired. But this isn't the case. Now what?
uninstall, clean (use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6) and then install correctly (do not migrate, use timemachine etc.) using the installation files.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7.1. 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
problem reinstalling windows Vista operating system.
I'm trying to reinstall the windows Vista operating system. When I restart and press F8 on my dell Inspiron will in the Advanced Boot Options. I support then to fix my computer, but instead of reloading Windows Vista my computer turn on normally. How can I solve this problem. Thanks in advance for your support. Valerie SGWhy you want to reinstall your PC? It could be that you don't need to reinstall Windows, and solutions you could solve, which is recommended.
However, if you want to reinstall your Windows, it's NOT F8, F8 key belongs to Windows and he'll fix the problems. To reinstall Windows, you must use differently for Dell steps:
And for more details, you could visit the Dell Web site and search for your model and find the method to do this, or contact technical support:
-
why I can't take a new picture and I can't remove all the images of photos.new will not be saved
Check your storage space on your iPhone, iPad and iPod touch - Apple Support
-
I need to install Adobe acrobat 8.1 standard on another computer that my old crashed and is no longer useabel. I have the disc and the serial number, but it will not activate. ?
Hello
If you are using windows, you might see the following link for download Acrobat 8 and then see if you are able to activate it.
Download Adobe Acrobat products. 9, 8
Concerning
Sukrit diallo
-
I just bought Adobe Photoshop elements 13 for a Mac and try to install. I'm about to enter the serial number, but it will not letters. What I do and where do I go for help?
Nitan15479421 serial number cannot contain letters. It is likely that you have received a redemption code. Please see Rédemption Code help for more information on how to use your redemption code.
-
I open my folder and make rotate the image (view), but reader will not save the rotated version (returns to original format).
"Rotate view" - possible to make using Acrobat or Adobe Reader.
"Rotate page" - possible to do only with Acrobat.
Be well...
-
The application databases
Name: Firefox
Version: 30.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:30.0) Gecko/20100101 Firefox/30.0Reports of incidents for the last 3 days
All Crash reports
Extensions
Name: McAfee Security Scan more
Version: 1.0
Enabled: false
ID: {e4f94d1e-2f53-401e-8885-681602c0ddd8}Name: McAfee SiteAdvisor
Version: 3.7.0
Enabled: false
ID: {4ED1F68A-5463-4931-9384-8FFF5ED91D92}Important change preferences
Accessibility.browsewithcaret: true
Browser.cache.Disk.Capacity: 358400
Browser.cache.Disk.smart_size_cached_value: 358400
Browser.cache.Disk.smart_size.first_run: false
Browser.cache.Disk.smart_size.use_old_max: false
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20140605174243
Browser.Startup.homepage_override.buildid: 20140605174243
Browser.Startup.homepage_override.mstone: 30.0
dom.mozApps.used: true
extensions.lastAppVersion: 30.0
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1404084666
places. History.expiration.transient_current_max_pages: 100530
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
Print.printer_HP_Photosmart_6510_series.print_bgcolor: false
Print.printer_HP_Photosmart_6510_series.print_bgimages: false
Print.printer_HP_Photosmart_6510_series.print_colorspace:
Print.printer_HP_Photosmart_6510_series.print_command:
Print.printer_HP_Photosmart_6510_series.print_downloadfonts: false
Print.printer_HP_Photosmart_6510_series.print_duplex: 1515870810
Print.printer_HP_Photosmart_6510_series.print_edge_bottom: 0
Print.printer_HP_Photosmart_6510_series.print_edge_left: 0
Print.printer_HP_Photosmart_6510_series.print_edge_right: 0
Print.printer_HP_Photosmart_6510_series.print_edge_top: 0
Print.printer_HP_Photosmart_6510_series.print_evenpages: true
Print.printer_HP_Photosmart_6510_series.print_footercenter:
Print.printer_HP_Photosmart_6510_series.print_footerleft: & PT
Print.printer_HP_Photosmart_6510_series.print_footerright: & D
Print.printer_HP_Photosmart_6510_series.print_headercenter:
Print.printer_HP_Photosmart_6510_series.print_headerleft: & T
Print.printer_HP_Photosmart_6510_series.print_headerright: & U
Print.printer_HP_Photosmart_6510_series.print_in_color: true
Print.printer_HP_Photosmart_6510_series.print_margin_bottom: 0.5
Print.printer_HP_Photosmart_6510_series.print_margin_left: 0.5
Print.printer_HP_Photosmart_6510_series.print_margin_right: 0.5
Print.printer_HP_Photosmart_6510_series.print_margin_top: 0.5
Print.printer_HP_Photosmart_6510_series.print_oddpages: true
Print.printer_HP_Photosmart_6510_series.print_orientation: 0
Print.printer_HP_Photosmart_6510_series.print_page_delay: 50
Print.printer_HP_Photosmart_6510_series.print_paper_data: 1
Print.printer_HP_Photosmart_6510_series.print_paper_height: 11 h 00
Print.printer_HP_Photosmart_6510_series.print_paper_name:
Print.printer_HP_Photosmart_6510_series.print_paper_size_type: 0
Print.printer_HP_Photosmart_6510_series.print_paper_size_unit: 0
Print.printer_HP_Photosmart_6510_series.print_paper_width: 8.50
Print.printer_HP_Photosmart_6510_series.print_plex_name:
Print.printer_HP_Photosmart_6510_series.print_resolution: 1515870810
Print.printer_HP_Photosmart_6510_series.print_resolution_name:
Print.printer_HP_Photosmart_6510_series.print_reversed: false
Print.printer_HP_Photosmart_6510_series.print_scaling: 1.00
Print.printer_HP_Photosmart_6510_series.print_shrink_to_fit: true
Print.printer_HP_Photosmart_6510_series.print_to_file: false
Print.printer_HP_Photosmart_6510_series.print_unwriteable_margin_bottom: 0
Print.printer_HP_Photosmart_6510_series.print_unwriteable_margin_left: 0
Print.printer_HP_Photosmart_6510_series.print_unwriteable_margin_right: 0
Print.printer_HP_Photosmart_6510_series.print_unwriteable_margin_top: 0
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.timeSpan: 0
Storage.vacuum.Last.index: 1
Storage.vacuum.Last.places.sqlite: 1403633482Graphics
Description of the adapter: ATI Mobility Radeon HD 4200 Series
Drivers: atiu9p64 aticfx64 aticfx64 atiu9pag aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64
RAM card: 256
Device ID: 0 x 9712
Direct2D Enabled: Blocked for your version of the graphics driver. Try to update your driver graphic version 10.6 or newer.
DirectWrite Enabled: false (6.2.9200.16571)
Driver date: 15/03/2010
Driver version: 8.712.2.1000
GPU #2 Active: false
GPU accelerated Windows: Direct3D 9 1/1
Vendor ID: 0 x 1002
WebGL Renderer: Google Inc. - ANGLE (ATI Mobility Radeon HD 4200 Series Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: skiing
AzureContentBackend: Cairo
AzureFallbackCanvasBackend: Cairo
AzureSkiaAccelerated: 0JavaScript
Incremental GC: true
Accessibility
Enabled: false
Prevent accessibility: 0Versions of the library
NSPR
The expected minimum version: 4.10.6
Version: 4.10.6NSS
The expected minimum version: 3.16 base ECC
Version: 3.16 base ECCNSSSMIME
The expected minimum version: 3.16 base ECC
Version: 3.16 base ECCNSSSSL
The expected minimum version: 3.16 base ECC
Version: 3.16 base ECCNSSUTIL
The expected minimum version: 3.16
Version: 3.16This could be linked to the "keyboard navigation" function, which moves the cursor on the page when you scroll with the arrow. Or maybe in this case jumps around things on the page.
You can enable the use:
- F7 key
- "3-bar" menu button (or tools) > Options > advanced > general mini-onglet > uncheck the box 'always use the buttons cursor to navigate through the pages.
A little luck?
-
I turned on my computer today and none of my programs has emerged. The icons were not on my desk. When I click on the start menu and click programs, it says (empty).
Hi Mlwatson82,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1:
Step 1: Start in safe mode and check if the problem persists.
What is safe mode?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode
See also
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
-
When I click on he App Store update, he said first a reboot is required, then it just happens before the restart, a pop up advising me that updates have changed and offers 2 options: 1) cancel, which does nothing and 2) show invisible characters, which also does nothing. I rebooted several times and it still does not work. What should I do?
In some cases, this error message is caused by a problem in the network. Please restart your router and your device at wide band, if they are separated. If there is no change, see below.
This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.
Please, back up all data and read this message before doing anything.
Triple-click anywhere in the line below on this page to select this option:
/var/folders/zz/zyxvpxvq6csfxvn_n00000s0000068
Right-click or Ctrl-click on the highlighted line and select
Services ▹ reveal in Finder (or just to reveal)
the contextual menu.* file should open with a selected subfolder. The subfolder has a long name beginning with "zyx" and ending with "68". Place this subfolder in the trash. Do not move other subfolders with similar names. You may be prompted for administrator login password. Restart the computer and empty the trash.
* If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
-
ADF picks up the paper and fire the first half of the page very low in rolls in the printer, the printer then makes all the normal sounds as had prepared for the task, but it just error and says to remove the paper jam. You hear a little noise of rotation as if he was failed in the second half, if you will, of the feeding process.
I tried all the tips of the ADF and cleaning tips, etc I do not jams, and I am aware of any previous jams.
Thank you in advance!
Hi there @FliAngler , I hope all is well
I read on paper jam error message you see on your Officejet L7780 however, there is no jam present. My suggestion would be to consult the guide below and clean the rollers. You can also try the other steps in the guide if the paper jam message comes back!
A message "Paper jam" for L7300 HP Officejet Pro L7600, L7500 and L7700 all-in - One Printer Series
If troubleshooting does not help, I would finally support.
Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
Best wishes
-
How do we install Cs6 on my new laptop computer...
Hello
Please download Creative Suite 6 applications
Hope that helps!
Kind regards
Sheena
-
Hi all
Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.
To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.
A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.
I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.
Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.
I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.
I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.
Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.
Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.
If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!
DISM is a thing of Windows 7. First test the hardware.
Standard hardware troubleshootingFirst to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.
Diagnosis of memoryIf you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.S.M.A.R.TStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason ListIf it is on will be true, otherwise on enable in the BIOS of the computer.Predict the failure must be False if everything is ok.In Vista and later if SMART failure predicted Windows prompts the user to run the backup.Run chkdskIn computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.SFCCheck the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).sfc/scannowHeatHeat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.For memory diagnostic resultsClick on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-resultsDouble-click the entry for more details on this entry.For results of Chkdsk
Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.Look for EventID is 7 and Source disk
Look for EventID is 11 and the Source disk
Look for EventID is 50 , and the Source is disk
Look for EventID is 51 and Source disk
Look for EventID is 52 and Source disk
Look for EventID 55 and Source is NTFS
Look for EventID is 130 and Source is NTFS
Look for EventID is 134 and Source is NTFS
Look for EventID is 137 and Source is NTFS
Look for EventID 1001 and Source is Autochk
Look for EventID 1001 and Source is Winlogon
Look for EventID 1001 and Source is WinInit
Look for EventID 1001 and Source is Chkdsk
Look for EventID is 26212 and Source is ChkdskLook for EventID 26213 and Source is Chkdsk
Look for EventID 26214 and Source is ChkdskDouble-click the entry for more details on this entry.PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.For the results of the SFCStart - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "It will be able to see which files are corrupted.To see if therefindstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|moreThere are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these. -
When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?
Hello
1st thing to try is a restoration of the system in safe mode
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not read this information
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/
If the problem continues to repost in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
I restarted my machine yesterday and now when it comes to the screen with scrolling bar (think Night Rider), it restarts in loop. Impossible to enter Safe Mode (arrives at crcdisk.sys and while it recharges) or normal startup mode. Startup Repair is unable to repair. She argues that the onus of a BadPatch.
Startup Repair shows the following:
Problem event name: StartupRepairV2
Signature of the problem 01: external Media
Signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
03:6 problem signature
Signature of the 04:262148 problem
Signature of the problem 05: BadPatch
Signature of the 06 problem: BadPatch
Signature of the problem 07:0
Signature of issue 08: 1
Signature of the problem 09: SystemRestore
Signature of the problem 10:0
OS version: 6.0.6000.2.0.0.256.1
Locale ID: 1033Hello
I hope you made redundant data backups as I suspect that the drive has failed. If a PC, you must
remove all power and remove and reinstall all the cables (at both ends where possible), memory and cards. Do
not tighten, effectively remove and replace them with care.Click here for the manufacturer of your hard drive and launch their diagnosis on your drive.
By manufacturer diagnostic utilities
http://www.techsupportforum.com/hardware-support/hard-drive-support/302602-hard-drive-diagnostic-utilities.html
SpeedFan
http://www.almico.com/sfdownload.phpHD Tune
http://www.hdtune.com/----------------------------------------------
If necessary:
You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.You can use another DVD that are not protected but you will need to copy you have the product key.
On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmIf nothing works, you can make a repair facility that must save the data but you will need to
Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
need to know your product Code.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.htmlNo new chances.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
"Jiggly" videos on different Web sites
It started suddenly two days ago! So far, the videos played perfectly. I have the latest version of Flash from Adobe and Mozilla. Suggestions welcome!
-
When I filled a credit card for purchases online, a useful list of all the cards I used appears. Many of these cards have disappeared, and there a typing error. How to access this list of credit cards? Or is it just to get longer and more I change
-
Taylor Swift 1989 tour will not play!
Why will not play around the world of 1989? No matter how long I left to buffering all that I get is a black screen.
-
Your cd/dvd-rw do this? If we are all in trouble.
My computer is a HP Pavilion a620n running Windows XP Home Edition. It came with a Lite On DVD + RW SOHW - 802S. And here lies the problem. It cannot read a dvd or cd disc but fails to write to one. Here are the steps taken by me to solve the problem
-
When I try to uninstall a program I get an error message indicating the module not found
I followed the correct steps to uninstall programs, but it seems that I'm looking for a program file that does not work or does not exist,