When I run Muse I get the following error message: error [file/deleteFile]: error

Similar Questions

• installed acrobat 7.0 on windows 8.1. Installation could cmpleet, but when I try to run acrobat I get the following error: 0xc00000fd

  installed acrobat 7.0 on windows 8.1. Installation could cmpleet, but when I try to run acrobat I get the following error: 0xc00000fd

  What can we do?

  Not at all surprised, is not for modern versions of Windows. You will need to buy Acrobat XI (sorry, far too late for the upgrade price), or join.

• When I run Vista I get the following message, even if it seems to work OK

  "osCheck has stopped working" what do I do?

  A quick Google for "osCheck" tells me that this file belongs to Norton Antivirus.
  http://www.bleepingcomputer.com/startups/oscheck-16239.html

  You can stop from running at startup or, better yet, uninstall Norton and get something much better. I recommend NOD32 (commercial) or Avast 9free).

  Start Orb > Search box > type: msconfig and when it appears in the results area above, right-click and choose 'run as administrator '.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue. Find osCheck under the Startup tab, and then clear the check box. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Usually in Vista it will be blocked by Windows Defender and you will need to enable it so you can then check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Instead, use the Services.

  Start Orb > Search box > type: services and when it appears in the area of results above, made a right click and choose 'run as administrator '. Confirm the elevation necessary.

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• In adobe muse Im getting the following error, say: "very big limitations contained (W:12903330.289490186 H:953897.3592778504) detected in BoxUtils::childBounds. I made a composition and by mistake, he has increased the size above the limits, Im not able t

  I need to get this fixed ASAP

  If you haven't already done so, please send us the .muse to [email protected] file as well as a link to this topic. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc.. Thank you.

• I downloaded creative cloud, Dreamweaver and Muse.  I get the following error message when you try to run Dreamweaver: '... Unable to start properly.  0xc000007b'. Muse started ok.

  I downloaded creative testing Cloud, Dreamweaver and Muse.  I get the following error message when you try to start the Dreamweaver application '... Unable to start properly.  0xc000007b'. Muse starts without a problem.  Is there something wrong with the download trial of Dreamweaver or is it my computer?  I downloaded the Windows 7 premium, Intel, processor Pentium B940 2.0 ghz, 4 GB ram, 64-bit operating system.

  ... 07 b problems http://forums.adobe.com/thread/1355374?tstart=0

• 6.2.16: when you try to update Itunes, I get the following error message: "there is a problem with this package of can I install."  A program required for this install to complete could not be run.  Contact your support team / packages vendo

  6.2.16: when you try to update ITunes on my Windows laptop, I get the following error message: "there is a problem with this Windows Installer package.  A program required for this teaching to complete could not be run.  Contact your supplier of staff or the package of support ".  There is no associated error code.  I've never had a previous issue with ITunes updates.  Thank you, Debbie

  Repair Apple Software Update since the programs & features Panel configuration and then try again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  Problem Windows install

  When you try to download iTunes I get the following error ' there is a problem with this windows package install a program required for this install complete could not be run.

  I looked at several forums and tried cleaning patches, etc they suggest.  I also tried to download Windows Installer 4.5 but keep says "the update does not apply to my system" (I tried all.)

  I am running Windows Vista and have downloaded the service pack 2 (one remedy suggestions!)  Someone out there has a solution?

  Hello, Atwitsend...,

  Try to repair.
  Go into Add Remove Programs, then select Apple Software Update > change > repair.

  If this does not work, try to uninstall. .

  Remove and reinstall ITunes, Quicktime, and other software components
  http://support.Apple.com/kb/HT1923

  Download the iTunes Installer and save it on your desktop.

  http://www.Apple.com/iTunes/download/

  Try to install iTunes using the installer that you saved.

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

  Greetings

  
  

  I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.
  

  
  

  I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.

  
  

  The Contact Sheet function was working well, until I ran the updates.
  

  
  

  I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...
  

  
  

  Help, please!

  Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

• I get the following error code 80070bc9 when you try to do window upsdates

  I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

  Hello Kristen,

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable or uninstall the security software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset components Windows Update the link below:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

  Hope this helps

• I get the following error: error \mset16g.dll specified module could not be found. I am running XP on top of vmware fusion

  original tittle:msetg.161

  I get the following error: error \mset16g.dll specified module could not be found.  I am running XP on top of vmware fusion

  Hello Salim'sMailbox,.

  ·         When exactly do you receive the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Response with more information to help you further.

• I get the following error when I turn on my computer ' C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.dat.

  Original title: rundll error

  I get the following error when I turn on my computer.  I am running VISTA with service pack 2.

  C:\Program data\f10a0075-c31f-4c3d - 9 c 66 - 6aa39dd52db1.dat
  Thanks for the help.

  Hello

  To remove the error message if still there after the controls above to malware.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  original title: The Audio service is not running windows vista

  Hello

  I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

  I saw it in Event Viewer

  The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

  Thank you

  -Majid

  These error messages are a pain in the neck to extract useful information.

  I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

  If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

  Realtek and NVIDIA, for example get stuff good free audio driver.

  If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

• Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I fix it

  Get the following error when trying to install adobe reader in Windows 10... "the file 'C:\ProgramData\Adobe\Setup\{AC76BA86-7AD7-1033-7B44-AC0F074E4100}\AcroRead.msi' is not a valid package for the Adobe Reader XI product... How can I solve this problem? Thank you.

  Hi JFO58,

  I recommend you to run on your system cleaning tool:Download Adobe Reader and Acrobat tool - Adobe Labs

  Later, try to install reader again by using the following link: Adobe Acrobat Reader DC install for all versions

  Kind regards
  Rahul

• first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»

  first items 12, new installation, serial No. accepted, installed and started again, but does not run. I get the following msg-box: ' LoadLibrary failed with error 126: Das angegebene Modul wurde nicht found.»   Installation in German on WIN7 64 bit professional, Samsung SSD. What can I do to run this program?

  Jürgen Freund

  First 12 items on Window 7 64-bit. What card card video/graphic fact your computer use - AMD Radeon?

  I found this YouTube video about the error 126 precisely to solve the problem.

  How to fix the ERROR 126 when you open programs OpenGL - YouTube

  The link was provided in an old thread from 2013 here by the ID danneomarre (see post 6 of the next thread)

  LoadLibrary failed with error 126: could not find the necessary

  Please let us know if it worked for you.

  Thank you.

  RTA

  Add on... When everything is OK and work, update the 12 to 12.1 update using Help Menu/implementation of an open project.