When I scan on my Dell AIO Printer A940, the image comes out all black in my images.
What I am doing wrong? Sometimes, it works very well with the wizard, sometimes it comes out all black and I don't do anything differently. Not sure if this is the right forum, but I would try thinking. Thank you!
You save all the scans in the same format?
Just guessing... but as the problem is intermittent, I would be
I wonder if you have problems with scanning photos
low contrast to borders... it might cause on board
detection for failure and the scan are not optimal.
Try to use the following steps to re-scan a photo
that failed and you can have a different result.
Place the picture in the scanner and go... Photo of tasks.
Get pictures from camera or scanner...
When the wizard starts... next left click...
On the... Choose Preferences screen scan... left click
the Preview button. Because of the automatic selection with precision frame
frame the picture? If not... you can adjust the left selection
Click on by dragging the dotted lines.
Also... try scanning only one photo at a time.
The site has a lot of info on digitization.
A few scanning tips:
http://www.Scantips.com/
Tags: Windows
Similar Questions
-
When I want to copy or print from the scanner on my HP4500. It comes out all black.
See above
There is no paper on the scanner screen - the message says that it is
Hi @OKC,
I see by your post that when scanning, they come out all black. You also receive a message that the paper is on the scanner bed where there is none. I can help you with this.
I have provided a document to make a reset of the printer, the scanner, the lid and ADF glass cleaning.
Reset will most likely solved the problem. Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.
Vertical stripes, lines or streaks on Copies, faxes or scans.
Do not take into account the title.
If the problem persists, please update the firmware of the printer. HP Officejet 4500 All - in - One Printer - drivers G510g.
Please provide detailed results if you're still having problems.
Good day!
Thank you. -
LexmarkX1270 of acts that it was printing but the paper comes out blank.
Since the installation of a new black cartridge in the printer, it works as it was printing but the paper comes out blank. I tried to reinstall the drivers of cleaning cartridge.
Let us know what happens after you try with another cartridge.
-
When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.
Hello1. how you try to install Service Pack 2?2. are you able to boot to the desktop?Method:Step 1: If you are able to start the computer in normal mode, then try a clean boot.To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: after troubleshooting, start the computer in normal mode.Step 2: Try to install Service Pack 2 manually.How to obtain the latest Windows Vista service pack
If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeIf you are unable to install Service pack 2, you can consult this article.Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
http://support.Microsoft.com/kb/949358Please note: method 2 refers about upgrade on site. Perform a repair installation/place will not damage files and applications that are currently installed on your computer. However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot. -
When I scan anything than it is in my computer it comes out always encrypted how to fix that
I try to scan documents in my computer of my kodak esp9 printer and all spell encripted how can I solve this
Hi Jackmcbreen,
· Is that the encryption occurs only when you use the software that comes from Kodak?
· This happens in windows scanner and Camera Wizard?
If this happens using the Kodak software, then you will need to contact Kodak for a possible resolution.
http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=9652&submit=&PQ-locale=en_US&_requestid=14287
I hope this helps.
-
How can I find the ink levels when I scan, which allowed me to print.
How can I find my ink level when I scan, allowing me to start printing.
Hello Maureen,.
Find things such as ink levels is a function of the printer driver.
This is provided by the manufacturer of the printer, and they are the best resource on the operation of their particular drivers. Therefore, it is best to ask the manufacturer of the printer for advice on this issue.
Sometimes, there is an icon in the taskbar that you can get this information. Yet once, it is a function of the driver and the printer software.
Best regards
Matthew_Ha
-
Have the disc supplied w/DELL AIO printer 944 photo. You need to reinstall. Windows cannot check the logo test. What can I do?
Hello
1. What is the full error message?2. it worked very well?
3 did you changes to the computer before the show?
Solve problems with programs that cannot be installed or uninstalledI suggest you to contact Dell technical support to check the new version of the software available.I hope this helps. -
Installation problems: Dell AIO Printer 962
I can't install my old printer (Dell AIO Printer 962) to my new laptop which is running Vista. Can you help me please?
Knowing that, here's a better link for the driver and firmware and utilities: http://support.dell.com/support/downloads/driverslist.aspx?os=WV64&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=PRN_ALL_A962&hidos=WW1&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False.
I can't talk to you throughout the process - is too long and there are too many things that could should be made according to which past that are best addressed in the manual that I have provided a link to in the previous post. I'm not able to write my own manual and even I tried I did not have the information and I'm not going to read the manual myself and then try to say it in other words for you - it would take too long and would be better.
This can help you with the installation of Vista: http://www.vista4beginners.com/How-to-install-local-printer.
I hope this helps. Feel free to ask specific questions as you go along, if you have any problems, but be specific (not "How do I install it").
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Dell AIO Printer 962 Photo and Windows 7 32 bit
OK, so I thought naively: "you had Windows XPII SP III for several years. Time to update. "I bought a program of 32-bit Windows 7 for my old Dell Dimension E520. Thank God I have the Windows 7 Upgrade Advisor printed report that told me what to expect with a certain number of programs, including Dell AIO Printer 962 Photo, Jasc Paint Shop Photo Album, WordPerfect12 and a few others wouldn't work, or have problems with Windows 7. First of all the Dell AIO Printer 962 Photo. Despite the fact I've updated drivers, and the small list of control on the screen tells me it is read to use, I get a message saying something like "your computer is unable to communicate with your printer. He then advises me to unplug/re-plug the USB power cord cord, restart the computer, etc.. I did all that, nothing. Second, the software I bought Corel, WordPerfectX6. The thing installs OK. Then I try to run it and I get a message stating: "WordPerfectX6 has stopped working" No. S_t! I tried to uninstall and reinstall and nothing. I had a call to the toll-free line 1-taking in charge, but I swear to you that I am about to return the thing and just do with NotePad. What is essential now is Dell
Photo AIO Printer 962. Someone at - he had THIS problem and found a solution? I mention the other problem where the two events are related. And since I use Windows7/32-bit, a Microsoft Product, I take a shot that maybe someone can have a cure! Thanks in advance for any advice. Series-poet: (o)Dell, web site, there is no driver Windows 7 not listed for your printer on the printer control, so everything you download may not work. The thing nearest Dell listed are Vista drivers, you can try the 32 bit version.
Cut first download auto driver from windows update.
Start right click System computer/properties/Advanced/settings/device installation settings/tick won't let me choose and never install win update and save the changes then install driver.
-
When I print an email it comes out very small and almost unreadable. If I use IE I do not seem to have the same problem. Certainly there must be somewhere I can fix the size of the font that prints. It is fine when I read it on the screen.
File > Layout Page or Firefox button > print-> Page Setup = scale
100% is usually better -
I reworked an old photograph, remove cracks in the original. However, when I print a photo on photo paper, the photo comes out darker I want. is it possible that I can do the lighter photo so what impression it improves?
original title: make the lighter painted image
Hello(1) what version of windows are you using?(2) lighter photo and print the photo what software do you use?(3) have what tool/application you used to remove the cracks?See the steps mentioned below and check if that helps.Method 1:Adjust the brightness and contrast of an image
http://Windows.Microsoft.com/en-us/Windows-Vista/adjust-the-brightness-and-contrast-in-a-pictureNote: The above link applies to Windows Vista.Method 2:How to edit pictures?Method 3:Windows Live Essentials: Photo GalleryHope this information helps -
Need help Kodak 5500 AiO printer over the network.
I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer. I need help.
Thank you
Phil
original title: using network printerEveryone,
That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.
Hey all,.
We had this same problem...
We had to follow the procedure proposed by Drompa...
> 1) share permissions
>> 1. In explorer, select C:\windows\system32\spool\PRINTERS
>> 2. Make a right click, properties
>> 3. Tab sharing
>> 4. Advanced sharing
>> 5. Check "share this folder".
>> 6. Permissions
>> 7. Grant everyone full control
>>
(> NTFS permissions 2)
>> 1. In explorer, select C:\windows\system32\spool\printers
>> 2. Make a right click, properties
>> 3. Security tab
>> 4. Edit
>> 5. Add
>> 6. Advanced
>> 7. Find now
>> 8. Select 'NETWORK '.
>> 9. Ok
> 10. Total control of the NETWORK grantAND THEN we had to install local printers, using the port trick...
1. go to 'printers '.
2. click on "add a printer".
3 Add a local printer.
4. "create a new Port.
5. use the "Local Port" option
6. on "Enter a Port name" enter: "\\Computername\Printername".And if all goes well should do!
Good luck!
Credit to Drompa and otherdreams to help out me.
Phil
-
Troubleshooting of Windows Sidebar
When I click on 'Add gadgets' in my sidebar, the screen that shows all the pop, but all the gadgets disappear immediately, so I can't click or select one of them. If this has never happened before, and what do I do?
Hello
If you use Start - type in search-> Sidebar box should still be crash - there may be a Gadget that causes
the accident that you can help out if you can get it to run by turning off then restart in a process of elimination.You are using a version of Vista 64 bit that has gadget support the 32-bit and 64-bit files? If so, you will need to
Run the lines of the procedure above in my 1st answer in both folders.This started recently past where you could have a Restore Point before this happened?
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
Hope this helps and happy holidays.Rob - bicycle - Mark Twain said it is good.
-
When I copy and paste into my Corel Draw, the image is distorted with the cutting tool
Original title: the cutting tool false image
I used snipping too long without problem. Now all of a sudden (only when I copy and paste into my Corel Draw) the image is distorted. I use windows 7 64-bit.
Hi Diana,
1 have you ever done any recent hardware or exchange of software on your computer before the show?
2 have you tried to check the issue with another application?
3. what files are copy you / paste in Corel Draw, using the cutting tool?
If the problem is specific to Corel application, then I suggest you to contact the Corel Support for assistance.
Corel communities:
http://www.Corel.com/Corel/pages/index.jsp?PgId=800085
Supported Corel:
http://www.Corel.com/Corel/pages/index.jsp?PgId=800170
For reference:
The cutting tool: frequently asked questions: http://windows.microsoft.com/en-in/windows7/snipping-tool-frequently-asked-questions
Snipping Tool to capture screen shots:
http://Windows.Microsoft.com/en-in/Windows7/use-Snipping-Tool-to-capture-screen-shots
I hope this helps.
-
Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.
Hi Chaz,
I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.
Please answer these questions to get a better understanding of the issue.
1 have changes made to your computer before this problem?
2 shut down other applications while they are in use?
3. do you get an error code?You can try these methods to check whether the problem is resolved.
Method 1: Run the troubleshooter of app.
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
Open this link to launch the troubleshooter.
Method 2: Update the application.
Method 3: Reinstall the application.
This link has the steps that you can follow to update and reinstall the application.
http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app
Feel free to use the forum for any other issue of Windows, you may have.
Maybe you are looking for
-
Laptop Eggrol: what can I use to make a video film on my laptop HP with window 10
I'mlooking to make a home movie video and I can't seem to find useful downloads and apps? Any recommendation?
-
Magic Encyclopedia Moon light game is not Compatible with Windows 7?
I have Windows 7 and that you can install the game Viva, Magic Encyclopedia "Moonlight", but he is not lance. I tried checking the compatibility with XP/run as administrator, but still get an incompatible application message. What should do?
-
Hello (Sorry for my English Italian..) I started windows, but strangely it went very slow, he continued to work, but very very slowly (no internet, it seems that I had 30 MB of RAM!) So I started "HDD regenerator" and he found bad sectors. When I fin
-
LaserJet M277dw: M277dw wireless connection problems
I just bought this printer 2 days ago and since then have worked so that it can connect to my wireless network. I didn't realize set up a printer would take over 12 hours and I am very frustrated. I am a 30 years old, the networking industry vetera
-
When I go to download pic on ETSY, I can not find the folder that contains the picture I want. I have just listed on Craigs list and he worked there. ETSY has worked before. When I go into start, photo gallery, I see what I want to put on ETSY, but