When I start my computer I get a blue screen saying "unmountable_boot_volume".

Similar Questions

• When I start my computer I get a message that says that the file < root windows > \system32\hal.dll. is damaged or missing.

  file HAL.dll

  When I start my computer I get a message that says that the file \system32\hal.dll. is damaged or missing. Please reinstall a copy of the file. I have the original Windows XP CD and I tried to re - install, but it will not go beyond the implementation of window. I can't sign in to windows. How can I reintall this file?

  It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose?  It depends on your hardware, but it is extremely likely that the problem (did I already say that?).  I've never had to replace a file hal.dll for this problem.

  The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted.

  For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top.

  If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too.

  You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go.

  For example, method 1 will not work if your system does not start.  You may have more luck with other "methods".

  If that doesn't work, then I suggest to provide a little more information about your system:

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system have IDE or SATA disks?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

• What to do...   When I start photoshop cc I get a blue screen of death Kernel_security_check_failure?

  When I start photoshop cc I get a blue screen of death Kernel_security_check_failure?

  You have an Nvidia GPU in your system?

  If so, you have installed a Nvidia driver with a serious bug in it.

  Contact NVidia to see if you can use their beta driver, or if you need to download an older driver to avoid this bug.

• Turning on my computer I get a blue screen saying 'Checking file system on C:.

  Original title: can not enter Windows

  Turning on my computer I get a blue screen saying "checking file system on C: the type of file system is NTFS.  The volume is dirty.  CHKDSK checks the files (step 1 of 3)»  It freezes ever complete the check, and I have to manually turn off the computer.  I can't get into Windows and also get this message in SafeMode.  Thank you.

  Hello

  We can refer to the following article and first try Method 3 and check if that helps.

  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

  If you're able to boot in SafeMode woth command prompt, then you also, try Method 2 of the above article.

• Whenever I start my computer, I get a blue screen STOP: 0X0000007E.

  I have Windows Vista Home Premium on an IBM Thinkpad T60p.

  I can start my computer in safe mode and log on and use some applications.
  Sometimes I can access the login (in normal mode) screen, sometimes even not far away.
  I get the error code is always:
  STOP: 0X0000007E (0XC0000006, 0X81CFFB72, 0X8B5BA930, 0X8B5BA62C)
  Please tell me how to fix this or that Microsoft help me.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• When I start my computer I get this error message: Windows cannot open this file: GLBD4EA.tmp

  When I start my computer, I get this error message:

  Windows cannot open this file: GLBD4EA.tmp

  To open this file, Windows needs to know what program you want to use to open it. Windows can go online to look for automatically, or you can manually select from a list of programs installed on your computer.

  What do you do?

  -Use the web service to find the appropriate program
  -Select a program from a list of installed programs

  No selection works for me. I don't know what concerns the .tmp file, or why I need to open it.

  Please help :)

  Hello

   
  Perform the following steps to remove the file from the registry.
  a: type regedit into the search box start and click on enter.
  b: Search now to the following key
  HLKM\SOFTWARE\Microsoft\windows\currentversion\run
   
  then delete the following key
  53E412B3-9907-4F9E-A6DC-D0106D1D72C
   
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information
  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Hope this information helps.

• When I start my computer I get an error message about V protect Application on the Windows XP-based computer

  When I start my computer, I get an error message, "V Protect Application has encountered a problem and needs to close".

  System information Utility version 1.0.0.1

  OS version: Microsoft Windows XP Home Edition, Service Pack 3, 32-bit

  Processor: Intel (r) Celeron (r) CPU clocked at 2.66 GHz, x 86 Family 15 Model 4 Stepping 1

  Number of processors: 1

  RAM: 1 GB

  Graphics card: RADEON 9250, 128 MB

  Hard disks: C: Total - 76316 MB, free - 47785 MB; KC: total - Mo 305168, Free - Mo 304760;

  Motherboard: MICRO-STAR INTERNATIONAL CO., LTD, P4M266-8233,

  Antivirus: AVG Free Antivirus, update: Yes, On-Demand Scanner: enabled

  I run the above system and would appreciate any help with the removal of this message as if I don't send it to Microsoft, it goes.

  Thank you

  Roy.

  You can try those Microsoft committed the 'experts' ideas Support Engineer (1, 2, 3) for safe, clean boot Mode, Online Scanner, but I think that most of the people who know how XP would recognize that there is no component 'V protect' in Windows XP and a simple search Google reveals that your problem is with your AVG software and has nothing to do with Windows XP.

  You should look in their forums (like me) and here's what they suggest:

  Vprotect belongs to AVG Security Toolbar.
  Please try to run repair installation using the latest installation package.

  If the problem persists, please follow all the steps in the instructions to complete reinstallation .

  I think that if I were you, I would follow the instructions on the page AVG to uninstall and reinstall your AVG because there may be other parts of AVG who are afflicted that you have not yet discovered, but in AVG, some people with V forums protect problems find that AVG repair install works.

• When I start my computer, I get and Error Message (InfoCenter.exe - Application error)

  When I start my computer, I get and Error Message (InfoCenter.exe - Application error) that someone knows what this means and why I make it?

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same error occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  I suggest you try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Check if that helps.

• When I start my computer, I get an errror messege, (c:\program v1.8.4 specials\webspec.dll, the specified module could not be found

  WHEN I start my computer I get an error message, (program v1.8.4 specials\webspec.dll specified module cannot be found

  Hi stinger2165,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• When I start my computer, I get an error message «Error loading C:\Users\jimhoss\AppData\Local\Temp\...» »

  When I start my computer, I get three error messages concerning three different files.  They all have the same path and they all say
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\bsipi.dll".
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\udilt.dll".
  "Error loading C:\Users\jimhoss\AppData\Local\Temp\mounINFO.dll".

  I have Malwarebytes and run it a couple of times and I remove all the files it detects as malicious, but I still receive these error messages when I start my computer.  I also have MS Vista.

  Hello

  They seem to be the remnants entered boot for malware.

  Malwarebytes is normally very good to remove things like that.

  The problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• When I start my computer, I get a screen that tells me the EULA has expired and I need to call the computer of the company rented to renew, however is not a rental?

  When I start my computer, I get a screen that tells me that the CONTRACT has expired and I need to call the company, that the computer can be rented to renew, however is not a rental? I have no idea what this same refers to, however, it gives me a password to enter, tells me that I have to wait 10 minutes, then it resets a chipset and allows the computer to, and then starts. I can't even take a screenshot of this message, because what it comes to control over the computer. I've scabbed virus and comes back clean. All this shows is a name of agent: HLZR4G1, then the Version 5.6.5 (Build-a-1028). The password was Wanker that seemed fishy, now the password is numbers and letters. Can someone explain this to me?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  make it work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• When I start my computer I get a message saying c:windows\system32\ambrune.dell, how do I solve this problem?

  When I start my computer, I get a message saying c:windows\system32\ambrune.dell how can I solve this problem?

  Original title: ken asked

  See: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/cwindowssystem32ambrunedll-the-specified-module/5c928ca6-e7e3-40ab-87f4-0224c2fc7759?msgId=c3b91db6-876f-484c-8216-2ffce4473a24

• When I start my computer I get a window (black) called cmd.exe.

  I have Windows 8.1.  When I start my computer I get a window (black) called cmd.exe.  It disappears eventually when the computer loads completely.  But, how can I get rid of the window cmd on startup?

  John Alderman

  Press Ctrl-Shift-Escape and go to the Startup tab to view all the things that load at startup. One of those who is going to be the cause of this view occurs. Sometimes it's easy to sort by name, it sometimes takes a few tests to know who is who.

• When I start my computer, I get a thing called trayapp that holds showiing, how do I get rid of him?

  It appears each time I start my computer.  I clicked on it and tried to delete it, but it won't go away.  Appreciate any help you can give me.

  Thank you
  Andi Toomey

  Download the freeware "Autoruns" from Microsoft software.  Double-click on it to launch it.  After it is started, click on the 'Startup' tab and all the programs that are scheduled to run when you start your computer appears.  Find the 'Trayapp' application and uncheck in the list.  Then exit the application.

  Autoruns: http://technet.microsoft.com/en-us/sysinternals/bb963902>
  HTH,
  JW