When I start my computer I get a message saying c:windows\system32\ambrune.dell, how do I solve this problem?
When I start my computer, I get a message saying c:windows\system32\ambrune.dell how can I solve this problem?
Original title: ken asked
Tags: Windows
Similar Questions
-
file HAL.dll
When I start my computer I get a message that says that the file\system32\hal.dll. is damaged or missing. Please reinstall a copy of the file. I have the original Windows XP CD and I tried to re - install, but it will not go beyond the implementation of window. I can't sign in to windows. How can I reintall this file? It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose? It depends on your hardware, but it is extremely likely that the problem (did I already say that?). I've never had to replace a file hal.dll for this problem.
The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted.
For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top.
If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too.
You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go.
For example, method 1 will not work if your system does not start. You may have more luck with other "methods".
If that doesn't work, then I suggest to provide a little more information about your system:
Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Your system have IDE or SATA disks?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a working CD/DVD (internal or external) drive?
You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)?
If the system works, what do you think might have changed since the last time it did not work properly?
-
Lately when I turn on my computer, I get a message saying. "Windows mail can compact the message store. This can take up to a few minutes. "It looks like a real message of Windows but when I click on the link"Get help from communities", it does not work. I cancel or close the message, because I fear that the message can be fake and won't open my computer for a virus or worse. Anyone has any info on this particular message? I can't find anything in the help section of Windows. Thank you.
original title: compaction of the database messages
Hi Kathy,
Please click on the orange button at the top of this page that will help you find the right forum for your problem in ads.
Mike
-
Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?
Hi Jer9009,
Welcome to the Microsoft answers site.
· Could you give the exact error code or error number you get?
To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.
A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.
For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge
Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
original title: Itunes and DEP
While downloading Itunes on my laptop right before you start to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation. Is there any solution for this? I'd like to install itunes on my laptop.
Hi Steve681229,
Thank you for using the Microsoft Answers forum. Here's what worked for someone else. Thanks Kevin
Hi thrivenformore,
Please use the forum for Support of Vista,
You could try to add iTunes to the DEP exception list. However, this behavior is not normal. Go to the support forum of Apple for iTunes for Windows, search on DEP. There should be a thread "How can I turn off DEP for iTunes?" or it Prevet planting iTunes? "which provide troubleshooting steps you might want to try before adding it to the list of exceptions."
How to add the program to the DEP exception list:
1. Press Start, right click on computer and select Properties.
2. in the window that appears, click Advanced (on the left panel) system settings.
3. in the first box that says Performance, click on the settings button.
4. in the window that opens, click the Data Execution Prevention tab at the top.
5. There should be a box of exceptions in the middle of this window. Click the Add button and navigate to the C: drive, then Program Files, then the iTunes folder, and then choose the iTunes exe.
6. Add the exception, and then click OK in the window of the DEP.Hope this helps, Kevin
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.Thank you for using answers Forum. Please let us know how it works.
Joseph
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
MY phone is 6 and my phone using the last update (9.3.2) when I type the time massges is stuck... (VIber, imassge, wts place) How can I solve this problem?
Now its all ways stuck not only type
-
Orb iTunes turns when you try to sort Apps on Iphone s 6 using Mac and PC at different times. Applications do not appear to the right of the applications that are registered in the ITunes applications library. How can I solve this problem?
Hi leon4444,
Welcome to the communities of Apple Support! I'm sorry to hear that you are having these problems with your iPhone. I'm kinda not clear on the exact nature and scope of the issue you describe, but if you are having problems sorting or organize your apps using iTunes, you can verify that you follow the procedure described in the following article:
12 iTunes for Windows: Sync and organize iOS apps
Concerning
-
When I try to erase a disc, Windows Explorer stops. How can I solve this problem?
Windows stops and restarts. It won't let me erase a disc. I had problems in other cases were shuts down Windows but can't explain what they are right now. How can I solve this problem. I am a novice when it comes to solving problems.
Try running chkdsk /f
Jerry
-
Whenever I'm listening to the radio or talk radio, the sound stops unless I move my mouse every 5 seconds dam... It really starts to pi * me off. Whatever the new add on no you guys sent please, get rid of it. I tried to restore my computer to an earlier date and work until the dam update download again. So I tried to delete a reinstall of firefox... Nothing works.
This problem is limited to audio players?
There is a much more serious problem affecting some users Firefox 25 where the browser stops just do nothing until the mouse is moved again. The best solution for this at the moment is back at 24 in Firefox. It has a link to the old installer in this article: install an older version of Firefox. To change your update settings so that you can see Reinstalling Firefox 25, see this article: Advanced panel - accessibility, navigation, network, updates and other settings in advanced Firefox.
-
I tried to search the frequently asked questions and did a search first. It did not work, what I found F9 turns the initial contacts on and outside, but does not solve the problem with the component being wrong.
Until a very recent update (last week or two at the most) when I type writing, the contacts pane in the window of writing have shown my address book. Now it shows some kind of research, that I can't use because I have to see all the entries to see which ones I want to send an email. In some cases, I have multiple entries for a person based on their having several email for different types of e-mail addresses. Try to remember those who want DOESN'T WORK for me. I can't get this behavior in safe mode. As an alternative, I need Thunderbird to save my setting of safe mode, so I don't have to reconfigure the SafeMode whenever I have to restart windows or restart Thunderbird. I currently come in default safe mode
I tried to remove and then install an older version of Thunderbird and the pane bad contact on the left was there. I can't find any setting to change the part of that wrong at the old I need. I would rather not try to reinstall win7 pro from scratch for this problem, assuming that would fix it.
I am running windows7 64 bit pro
It was very strange. Now things work properly and I don't know why. I want to thank everyone for their help. The image shows the first letter of the contact you want on screen messages write with the address list. Before it wasn't to show a list of addresses, just search options to search for address books. I think I'm more confused then I was before. I'll try a reboot and see if the message of Scripture remains fixed.
Once again, thank you for all the help and hope that the correction is corrected.
-
This problem just happened while looking through the Mozillza support site.
while scrolling (two finger or with scroll bar) , after a few,(3-5) seconds, the display jumps to the top of the page.
I only have usually a website open at a time and this was the case during this most recent event.
Please, couch answers in simplest terms as I am old and unfamiliar with techspeak. Thank you!Have you noticed any other unusual behavior?
In the case where one of your extensions is concerned, could test the page Firefox Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.
You can restart Firefox in Mode safe help
Help > restart with disabled modules (Flash and other plugins still works)
In the dialog box, click on 'Start mode safe' (not Reset)
Any difference?
-
I don't want to go to earn 10 - I've heard too many problems. I'm ready to upgrade to win 8 or 8.1 if it means I get a legitimate copy of windows
See more of Diagnostic report.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Code of Validation caching online: 0xc004c4ab
Windows product key: *-* - X92GV - V7DCV-P4K27
The Windows Product Key hash: aU2z1/fnhnLHmhBm699qYZT2E6s =
Windows product ID: 00426-OEM-8992662-00400
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {39925E49-B133-4F66-B5AD-313D699A1FC4} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.151230 - 0600
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
Other data-->
Office details:
{39925E49-B133-4F66-B5AD-313D699A1FC4} 1.9.0027.0 6.1.7601.2.00010100.1.0.001 x 64 *-*-*-*-P4K27 00426-OEM-8992662-00400 2 S-1-5-21-2595295314-2542787543-4225730385 Corporation Sony VGC-RT100Y American Megatrends Inc.. R0215T2 20090902000000.000000 + 000D94A3007018400F8 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 HPQOEM SLIC-MPC 109 Content Spsys.log: 0 x 80070002
License data-->
Input error: can not find script file "C:\Windows\system32\slmgr.vbs '.
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: not registered - 0x80070005
Output beyond bitmask:
--> HWID data
Current Hash HWID: NgAAAAEAAgABAAEAAQACAAAABAABAAEA6GFeeXrS2FDET5CjxF2wENabrO + LNoiqlLsihUxY
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC Sony VAIO
FACP Sony VAIO
HPET Sony VAIO
MCFG Sony VAIO
SLIC SLIC-MPC HPQOEM
OEMB Sony VAIO
GSCI Sony VAIO
SSDT Sony VAIO
The date of manufacture of your system is around September 2009, which means that your system might have are preinstalled with Windows 7, but another edition such as the home edition Premium or Home Basic edition.
Check at the bottom of the laptop or in the battery compartment to confirm the version and edition of Windows which initially is preinstalled on your laptop, then the answer here with your findings.
-
I run Windows Vista. Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.
connection. Ensure that the computer is connected to the internet and try again".
My computer is connected to the internet, and it works very well. How can I get rid of this annoying message.
I tried all means to find this file on my computer, but it does not appear to be
Can you help me please
Mike Gray
Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the check and the boot if the problem persists.
To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note: Follow step 7 to reset the computer to start as usual after the boot process.
Hope that helps. -
Runner error invaldi 137903 backweb application ID
Runner error invaldi 137903 backweb application ID
You can have an application antivirus or antimalware too aggressive. Which do you have?
See: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00061410
I suggest NOT to take advice of HP to make an "HP System Recovery". If you are unable to uninstall HP or Compaq connections, you can probably prevent the error message by disabling the application HP Backweb to start as follows:
Removes the AutoRuns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Install and let it scan. When the analysis is complete, click the 'connection '. Examine the entries in the tab log for an entry which seems related to the Backweb or HP or Compaq connections connections. If found, clear the check box for this item.
Restart and confirm that the error message does not appear.
If you cannot determine which of the no doubt several items related to HP is the culprit, uncheck half of them and restart. This repeatedly until you identify the startup item that is causing the error message.
In AutoRuns, leaving an unchecked item prevents him from starting automatically at startup, but you can restore the automatic start simply be rechecking the box. Once you determine you want to never see again the question, you can remove it.
-
I update firefox from version 7 to version 8, now when I run firefox every time it itself open the Web "to start with firefox", in firefox options I select the "show a blank page" but his does not work. I use firefox on windows XP - SP2.
Try to restart Firefox, the time of a page (s) after the beginning of a new version should disappear. In fact this last time with 8.0 they did not come to the top for me.
If it works then raise Subject: config and insert the url of the page into the filter. Right-click on anything that appears and use "Reset".
Maybe you are looking for
-
Try to upgrade to Mac OS 10.11.6 El Capitan, but the Mac App Store gives me an error when searching for updates. The error is "NSURLErrorDomain error 1100. I've seen people say it's a DNS issue or there is a problem with the Apple servers, but I was
-
What can I do if my 6s sillicone iPhone chip?
I bought my case silicone back in September and noticed a few days ago it was a small tear. The phone has never been dropped. A few days later, I noticed a similar tear at the bottom of the case. These silicone tears fell gradually just leaving small
-
Sam P870/Win8 - not all the features of Gesture Touchpad Synaptic work
Click n drag does not work for me... how about yourself?Simple finger don't scroll also no go... . How about you? Initially, it did not work with the synaptic driver from Toshiba... so I tried the last generic of Synaptics.He gave me more options but
-
Update caused Windows Blue Screen of Death. Suggested fix does not work.
In February, my Sony Vaio laptop has been updated automatically by Microsoft and now it does not start. I followed all the instructions in this thread (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2
-
Want 4500: Device Configuration->; device non-reachable
My new envy 4500 _IS_ on my network. My new MacBook Pro _IS_ on my network. I get to the configure step and everything looks good, until I get the answer below: "Device setup". 0 select device 0 confirm the anti-piracy settings O select network Devic