When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.
(I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.
Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,
Take a look at this:
Hope this helps
Post back if necessary
If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Original title: programs network networking Internet site Internet Site Web Web Site URL of the network
Wen I turn on, I can point to enter my password. I entered my password and the screen displays a symbol of shooting and seems to expect something to go. The mouse does not work and none of the keys work. I have WIFI in my house, but the system looks like it's waiting to connect. I waited for more than 10 minutes. The only thing I can do is press and hold the switch down for a few seconds until there is a power down. I then power back up and get my password again. I between it and the system is in place OK. It happens all the time. It all started about 2 weeks ago. I have not loaded all the apps since it worked normally. Also, if I am growing up and running and I doi a stop with a reboot, the system comes down and restarts and arrives at the passwword. Enter the password and I have hung up again.
· Have you checked the problem in safe mode?
· What version of Windows operating system is installed on the computer?
Try the following.
Method 1: Start the computer in safe mode and see if the problem persists. Report of the results.
Method 2: You can run the Microsoft Safety Scanner to search for infection by the virus. Check out the following link.
My child put their hands on my laptop now it starts and then it says no operating system found, or there is another sign that comes up it says
Security Accounts Manager intiliaztionfailed because of the following error: the handle is invalid. Error status: 0xc0000008 please click ok to shut down this system and reeboot in safe mode / check the log of the events for more information
the laptop say no operating system found is when I put the xp disk in I thought the disc would have fixed it... .as now you will probably laugh like its obveous I nothing about computers of any help would be much appreciated because it wasn't a cheap laptop and I need to keep the best care that are out of my reach of girls, but he himself is a task... Thanks in advanve david
I just bought a new Toshiba Satellite L500.
As I am a student in high school, it was a huge and very expensive purchase for me.
I previously had a Toshiba that served me extremely well, so I was ready to buy a new one, but now I have a problem with it.
I have a L5000 with operating system Windows 7 Professional.
Notepad starts end, showing the Welcome screen and allowing me to enter my password, but once the password is accepted, and disappears from the Welcome screen, I find myself with a black screen showing only my mouse pointer.
If I enter CTRL + ALT + DELETE, the Task Manager becomes visible, but I don't see nothing else UNLESS I select 'explorer' under the processes tab and end process, then re-run the Explorer - then only the home screen becomes visible.
It's a new laptop - Needless to say I don't want to have to do this every time I turn it on. I should try to restore factory default?
I'm usually very proficient with computers, but I don't have enough faith to tinker with it.
Can anyone help?
It sounds like an infection or a misconfiguration.
You can try to start in safe mode and search for services that run maybe you can find the "bad guy".
or (the fastest) is to restore the factory settings
Make sure the bios is on the 'default' as well
I think that you have no personal data on this machine in order to recovery is the most simple and quick way!
If the error after recovery occours made back to your dealer and get another
At the beginning; After the Windows Logo at the start, the screen goes black and a POWER SAVE MODE comes up. I must stop button. I can run the computer as I am now in Mode safe mode with networking.
When I turn on the computer of gateway, the machine starts and the initial window logo starts and runs for about five seconds. Then the screen goes black instead of blue and stays black for about 10 seconds. A 'Power SAVE MODE' appears. The machine is dead to all orders. I have to stop by pressing the off button. I can turn back and the F10 key to get in Mode safe mode with networking.
I tried to reinstall Windows XP original but it would erase my files. I tried to restore the last good configuration also knowledge. That did not work.
The change came after a Windsows update. I have McAfee security and I asked Windows but could not use due ot a conflict. -C' is all this bad start. Clues? I use Negear. No change when I hooked directly either.
Botton line, I can run in SafeMode with networking; but it is slow and I can't make alll I have to do. What does not load Windows?
file HAL.dllWhen I start my computer I get a message that says that the file
\system32\hal.dll. is damaged or missing. Please reinstall a copy of the file. I have the original Windows XP CD and I tried to re - install, but it will not go beyond the implementation of window. I can't sign in to windows. How can I reintall this file?
It's extremely likely that you will need to replace the hal.dll and since there are seven files on the XP installation CD that will extend into hal.dll, which would you choose? It depends on your hardware, but it is extremely likely that the problem (did I already say that?). I've never had to replace a file hal.dll for this problem.
The real problem is most likely that XP just can not find the file because of a file system corruption or a file c:\boot.ini afflicted.
For this error, I would always be first boot from the XP Recovery Console and sometimes run a chkdsk-r that will fix things right to the top.
If the chkdsk /r is clean and you have the same problem, and then re-create your c:\boot.ini file but rename the old one first so you don't build on top of those afflicted - this tidbit is absent from MS KB article that assumes too.
You can do all this in the XP Recovery Console, but do go through these methods in this article and see how you go.
For example, method 1 will not work if your system does not start. You may have more luck with other "methods".
If that doesn't work, then I suggest to provide a little more information about your system:
Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system. Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.
Provide information on your system, the better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Your system have IDE or SATA disks?
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes the plug pulling, buttons power, remove the battery, etc.)
The afflicted system has a working CD/DVD (internal or external) drive?
You have a real installation CD bootable XP which is the same Service Pack as your installed Service Pack? (this is not the same as any recovery CD provided with your system)?
If the system works, what do you think might have changed since the last time it did not work properly?
I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.
-What software changes you did on the computer before the show?
Follow these steps:
Start your computer in last known good configuration mode.
Follow the steps in this article:
Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.
original title: Auto Adjust
Whenever we start to use our computer, the screen goes black and the message 'Auto adjust is in Prgress'. Then, all of our screen is small and all the icons and pages are smaller than before.
I tried restoring the system that works and that gets our screen back to normal but every day that this Auto setting is coming and we can't seem to stop it.
Any help would be appreciated... Thank you
Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
Change the screen resolution
Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.
See you soon.
Mick Murphy - Microsoft partner
My wireless mouse works fine for the last 2 months, now, all of a sudden it doesn't work at all.
I get a windows notification that says-
"One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."
I have Vista 32 bit OS on my laptop.
My office has Windows 7 32 bit and I am able to use the mouse on this computer, then the M225 is not defective.
I tried to look for a download of update on the site of Logitech & only found:
6.32.20 set - point it did nothing to help.
I also tried to move the receiver to the other 2 ports USB w / still the same results.
Are there other downloads or solutions that will help w / this problem?
You can also try searching for devices strangers (with yellow symbols) in the Manager under the mouse devices and other pointing devices and other devices (if any). Right click and uninstall unknown devices. Then restart.
Also try the steps below to reset the power of USB:
(a) the laptop off, unplugged from the wall outlet.
(b) remove the battery for a few minutes, then reinstall it.
(c) then restart the laptop.
Original title: Canon MF 4500 printer inkjet
My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.
1. what operating system is installed on your computer?
2. when exactly you receive this error?
3. all USB devices work properly on your computer?
4. have you made changes on the computer before this problem?
You can try running the fix - it from the following link.
Hardware devices do not work or are not detected in Windows
You can try to uninstall and reinstall the USB controller. Follow the steps.
(a) click Start and then click Control Panel.
(b) click System and Maintenance, click System, and then click Device Manager.
Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.
If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
(c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
(d) repeat step 2 to uninstall all items under 'USB Bus controllers'.
Then, restart your computer and Windows will automatically reinstall all USB controllers.
It will be useful.
Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.
Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...
I have a dell inspiron that was originally windows Vista and I changed to windows7. I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.
How and what should I do to get the printer going or to get the computer to recognize. Installation CD will not work and I looked online and downloaded drivers but still the same thing.
Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.
Open the hardware and devices Troubleshooter
Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.
Method 3: Connect the printer to a different USB port and check.
Method 4: Reinstall the USB (Universal Serial Bus) controllers.
First of all, please disconnect all USB devices and then perform the following steps:
(a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.
(b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".
(c) repeat step 2 to uninstall all items under 'USB Bus controllers'.
Then, restart your computer and windows will automatically reinstall all USB controllers.
HP printer drivers- ensure that you download the driver appropriate for your device model package.
Thanks and greetings
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Some time ago I had a huge problem with my computer (I think that my mother-in-law accidentally downloaded a virus) and I took it to a repair shop where they wiped out completely and replaced the hard drive. Since I got it back when I try to use my wireless mouse and plug the nano receiver he said 'one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Why he says this? And what can I do about it if anything? I already tried uninstalling the driver and reinstalling, but that did not work because as soon as I plugged it it again once he says the same thing. So I don't know what is happening or how to fix it. Please help me!
Hi Carla,.Please go to the Microsoft Community Forums.After the description of the question, I understand that you can not use the mouse on the computer wireless.Let me go ahead and help you to questionWhat is the brand and model of the mouse?
Here are some ways you can follow to resolve the problem:Method 1:Try to connect to other USB port and verify.Method 2:I suggest for the link and follow the steps in the article:Troubleshoot a wireless mouse that does not correctlyMethod 3:Remove and reinstall all USB controllersFollow these steps:
a. click Start, click run, type sysdm.cpl in the Open box and then click OK.
b. click on the hardware tab.
c. click the Device Manager button.
d. expand Bus USB controllers.
e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
f. restart the computer and reinstall the USB controllers.
g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.
I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.
However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do
Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?
You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
What operating system you use on your L405D satellite?
To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.
In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.
If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
Explain your very detailed problem. I think that everything can be clarified then. :)
When I start my 2 year old Toshiba Satellite M40X, I get to the banner of Toshiba, but Windows does not start. I tried using the recovery CD and it does not either.
Any suggestions as to what could be the problem?
What do you mean with the banner of Toshiba? Did you mean the Toshiba splash screen that appears at the begging of the boot?
Equium M40X successfully passed this screen?
If the laptop is unable to switch to the home Toshiba screen then I presume that the BIOS has detected a hardware problem.
In this case primarily the motherboard fails
But if the laptop is able to spend the Toshiba start screen, the motherboard must be ok and only a 3rd device malfunction as HARD drive could cause this problem.
Try to study a little
I get the following message when I join my computr "one of the usb devices attached to this computer has malfunctioned and windows does not recognize," my nokia C3
Most often when a device is not it's because of a driver. Try reinstalling your.
It works for win 7 & 8
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1
Maybe you are looking for
-Very well, so I didn't know where to post this topic, but here's the deal. Skype continues to show me as online even when I'm offline. I don't know why and it's getting boring. I assumed it was because I could always be connected on Skype on my Ipod
I installed the Windows Vista SP2. Now, when I run the utility of Tuner FM NXP v.1.9, radio starts playing after a few seconds of "stuttering". Then, the audio is "echo". In other words, I hear two liable - 2 seconds late on the first. I can't descri
* Original title: backward compatibility Is it possible to ask the people at Microsoft to add games to an Xbox backward compatibility? I really miss playing Skyrim, Oblivion, Far Cry 3 and many other games. Thank you
Well, it SUCKS! My sister went to New York for a week. and she bought me a sansa Fuze 4 GB black... She came back to the Argentina yesterday... I used the mp3... last night and tonight when I tried to turn it on... NOTHING. It doesn't work anymore! a
Running Vista Home Premium (of office), power management the value default or custom, machine will not enter mode 'sleep' according to the plan. He has worked for a long time, but didn't. He may be forced to sleep through the icon 'start '. This coul