When I start my Satellite A300 the screen remains black

Similar Questions

• With some games in many places of the screen remains black

  With some games, for example completed GTA 4, but when I start several tasks in the game remains black
  is my video card: NVIDIA GeForge 7300 THE
  any1 have suggestions

  It's your graphics card, I think that this particular model has 128 MB of ram, which. You need at least 512 MB to start the game, so don't expect anything good or flashy.

  Upgrade your video card!

  also, this site is great test games to see if you can run it.

• Satellite A300 - turn is not on, the screen remains black

  I have a laptop Satellite A300. I tried to turn it on when I got home from work and the screen remains blank. The bottom (plug, power and battery lights) turns on but the screen remains black.

  Can someone help me?

  Hello

  It of hard to say what's going wrong here, but maybe it s just a small issue that could be solved easily.
  Try this;
  Remove the battery, disconnect the adapter.
  A few hours and reconnect the two parts.
  I had this problem in the past and leave the laptop disconnected during the night.
  The next day, I connected battery and adapter A\c and the laptop worked again

  Maybe this will help you too

• Satellite U920T - the screen goes black when you drag the keyboard

  This morning, I turned on my U920T-10 days but the screen remained black.

  At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

  How can this problem be solved?

  Hello

  For me, it looks like a bad connection somewhere between the screen and the motherboard.
  This could be possible reason for failure to display while sliding in and out.

  I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

  I hope that this can be corrected. I keep fingers crossed.

• Satellite 210CS - the screen stays black (even to an external monitor)

  Dear Toshiba Forum members and guests.

  Several months ago, I found an old laptop. When I turn it on, the screen remains black. And when I connect an external monitor to the laptop via the VGA input, two screens are black. I used a flashlight, pulled on the LCD screen of the laptop, but I don't see all the details on the screen.

  I thought it was because of the empty RAM slots. This week, I bought a RAM-unit and installed.
  I tried to start the laptop again, but nothing on the two screens (even though I used a flashlight).
  I searched the Internet for certain solutions, but nothing works. I also tried updating the BIOS, found on the Web from Toshiba site.

  Some information on the laptop:
  Toshiba Satellite 210CS/1.3
  PA1230E
  48 MB RAM
  1.3 GB HARD DRIVE

  Date of manufacture: 4 ^ th ^ October 1997

  If you want more information or you would like more information, please put a comment in this thread.

  I hope someone can help me solve this problem.

  Thanks in advance.

  I think there must be some serious hardware problem.
  I don't think that someone will be able to tell what part exactly failures because it could be any inner part.
  You buy the RAMs again. Well, in this case, we can exclude RAM problem, but there is probably a motherboard, CPU or a graphics card problem.

  From my point of view of the few you don't have many options: perhaps you could found some other good treatments Satellite 210CS somewhere in the internet since it is not very easy to get parts for this oldie

• Satellite a200-1sv screen remains black at startup in Vista

  Hello

  We have a problem with Toshiba Satellite A200-1sv my girlfriend: when we started, most of the time, the screen remains black, while the computer starts: after awhile, we can hear the sound of windows (vista).

  In addition, if connect us another screen of the computer, it displays the scheduled start screen. In order to use the computer, it must launch a few times... The support guy where we bought the computer told us "the computer is not compatible with Vista, we cannot do something".

  Can we do something?

  Thanks in advance,
  Ju

  I have to smile to read this message
  Mainly, this statement is funny;
  > The support guys where we bought the computer told us "the computer is not compatible with Vista, we can't do something."

  I think that this laptop has been delivered with the Vista operating system. So why the guy said that the laptop is not compatible with Vista?  :| …. that's nonsense.

  First the A200-1SV belongs to the PSAE6E series and it s fully Vista capable.
  Secondly, like you say the external screen displays home Toshiba screen and so I guess that's just a matter of adjustment.
  What you can do is to use the FN + F5 key combination to switch between display devices.

  If it doesn't help to try to put the laptop back to the factory settings using the Toshiba Recovery CD!
  In this case, the new OS, driver and tools will be installed and then everything should work fine.

  Good bye

• MacBook Pro 2015 turns on but the screen remains black...

  Hello

  Today, I tried to turn on my MacBook Pro, but my screen stays black. When I press the caps lock button, it turns green which I guess means he lit. I've also heard the startup chime it generally makes when you turn on. I already tried to turn it on and off several times and reset the SMC and the LANDAU... The screen is always black.

  Could someone help me please?

  Also a few minutes ago the fan has started to make noise in the macbook...

  But the screen remains black.

  Thank you

  Shaynidw

  Hi shaynidw,

  From your description, it seems that your MacBook Pro is powered, as soon as you hear the startup chime and see the light on the keyboard.  Thus, it seems that the problem may be with your screen or the video card.

  On the screens you see when you start your Mac

  Power on

  

  When you turn on your Mac, display is off (black) and you hear a startup chime. Your Mac Initializes his BootROM and memory (RAM live). It then performs a power - on that self test (POST) and a test of BootROM. If you hear beeps or chimes at this stage, this indicates a possible hardware problem and start stops. If you add memory to your Mac, check that it is installed correctly.

  White screen

  

  After that only walking self-test is completed, your Mac sends a video signal to your connected screens. The screen may appear black or grey at this point in the boot sequence and backlight of the screen should light up. If you do not see the image appears on your screen after a few moments, try increasing the brightness of your screen. If you use an external monitor, make sure it is properly connected and turned on.

  shaynidw, if set up the brightness of your screen does not help, you have an external display (computer screen or TV) that you can attach to your MacBook Pro to test?

  In addition, you can try to start your computer in safe mode to see if you get different results.

  Try safe mode if your Mac does not end commissioning

  If the problem persists, you may need to take your computer to an Apple Store or service provider authorized Apple , so they can inspect the video card and cables to isolate the problem.

  Take care.

• I just bought my hp pc Pavilion g series, but many times not dΘmarre; the screen remains black or blue and must strive to market several times. What is going on?

  When I turn off my pc and that you want to turn it back on, it does not work and the screen remains black or blue, sometimes but nothing else and does not

  starts up, until I have try several times in pushing and disable the power button and suddenly starts working again. The pc is almost brand new (2 weeks)

  What is going on?  Thank you very much

  Hello

  I suggest you do the repair of the system startup and check if that helps resolve the issue.

  Check the link for more information on repair system below.

  Startup Repair

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  You can also check the event viewer for more information on the error message.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  See also:

  Resolve stop (blue screen) errors
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• Toshiba Qosmio DX730 PAQ13A - no signal - the screen remains black

  When I turn on PC (all in a single DX730 PAQ13A-010005) the amber light turns white as it should. However, the screen remains black.
  If I unplug the connection, and then reconnect it, a message appears on the screen indicating 'PC', it then changes briefly to display the message no Signal.

  He will not go to log in screen etc. because the screen stays black.

  All advice appreciated.

  Must be the hardware problem.

  It seems that no signal can be picked up by the monitor...
  Probably the mother or any other element connected to the motherboard is defective...

  I guess its time to contact a technician if you want to solve this...

• 32L3441DG - bright green but the screen remains black

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  

  Posted by Patrick p
  

  I turned on my PC and my TV, everything has worked perfectly.

  When I came home from school, my PC was on but I turned off my TV when I went to school. I tried to turn it back on, the light was blinking red and green as usual when you turn it on. When he stopped flashing green, the screen remains black.

  Hello, I have the same problem.
  I can hear TV-Programm, but the screen remains black.
  Uwe,

• HELP computer HPg61 turns on, the screen remains black

  I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

  -HP g61 laptop

  -Windows 7 home prem

  Hello

  al1986 wrote:
  

  I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

  -HP g61 laptop

  -Windows 7 home prem

  Try a hard reset:

  Remove the battery and unplug the DC power adapter.
  Press and hold the power button for more than 15 seconds.
  Plug the DC power adapter (leave the battery for now)
  Press the power button

  Please post your results here.

  Best regards
  ERICO

• Acer blue 720 and the fan are on but the screen remains black

  Hello

  I appreciate any help that can be provided.  I tried to remove the batter on my daughter 720 and reinsert, but this problem persists.  I can hear the fan and the blue light turns on but the screen remains black.  I tried to rest for 30 seconds and esc, refresh and power.

  Thank you

  Well, when the scrween does not at all (even in text mode which allows a recovery) then it is most often a problem with the cable bwteeen the motherboard and screen, most often following it is a failure of the screen (which requires generally a matter of co-location as cracked screen) and from time to time, it is the motherboard. Probably time to contact Acer support to see on a repair.

• Satellite P200D-139 - screen remains black

  Hello, Ive had my laptop for a few years and after leaving in my freezer for a few weeks on vacation, I went to turn it on and the laptop turned on and the lights came, but the screen remained black. The screen was not completely black she lights up very slightly, but nothing was visible at all (not even very thirsty)

  In the past, I encountered a situation where I had a red tinge to objects on my screen, but also red horizontal lines. This was never permanent and only occasionally happened.

  About my most recent problem involving the black screen, I tried taking the battery and holding the switch thing on, but also to take my ram out and put it back again. After that I took the ram out, I turned on the laptop and the screen shows red objects and flashes the screen loading and then black again. I don't know if it was because of the ram or just a coincidence.

  I'm completely stuck on the current situation and would be grateful for all the help I can get. Thank you!

  Hello

  If everything is clear: in your case I would like to connect an external monitor to the laptop. So that you can identify if the problem is related to the screen internal or graphics card.

  In both cases you need professional help, I think the something on the hardware needs to be replaced. Therefore, you must contact an authorized service provider. Technicians can check your laptop and fix it for you it's a little tricky.

  On the Toshiba page, you will find a list of ASP.

  Welcome them

• Satellite A100-495 - screen remains black after switching to food

  After feeding, the screen remains black, the computer no longer works.

  What can I do, why?

  > After the transition to power, the screen remains black, the computer no longer works

  It works fine on battery?

• HP2000 369wm: connected replacement screen, the screen remains black.

  Hi I'm new here, I tried to find the solution here, but I can't find what I'm looking for but anyway...

  My laptop had a broken screen so I used an external monitor via the vga input. One day I was messing around on the web and I got a virus that paralyzed the system that all frozen cuz then I thought that if I plugged in my phone that I could try to fix it, but eventually transmitting it to my phone, but luckily I could reset it. I thought that if I replaced my screen that I would be able to get the screen for boot sequence or something but the screen remains black and externally will not work. There is something lacking in me to use the primary monitor, I just put? Or is there a way I can format without being able to see? I'm sure that the virus all messed up my boot sequence, but without seeing the screen and unable to use external, I am at a loss.

  cruizer71 wrote:

  Sorry Ive had one hell of a record time on my account here. I couldn't find the PDF you were making reference to, could you post a link?

  regarding the laptop:

  model: hp2000-369WM

  series:

  product: QE339UA #ABA

  OS: WINDOWS VISTA 32-bit (I think, but its vista for sure)

  is there another number or anything I should post?

  Here is your model and it doesn't have a Vista operating system... it's a Windows 7 or Windows 8 double, so check again?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5171087&LC=en&cc=us&DLC=en&cc=us&lang=en

  And your billboard is the reference number corresponding to this HP part number:

  15.6-inch, HD, LED, display panel BrightView 645096-001

  It shows that a single panel comes with this laptop.