When I start my system, it continue evern reboot in safe mode, safe mode with command prompt
When I try to repair xp, it shows not disassemble the partion
don't know what repair options, you tried, but you can boot from the windows disc and choose recovery console 'r' to the stop screen trees during the installation of windows. This will bring up a command line screen choose your partition type passsword if necessary, simply press "it is perhaps empty" enter and then type chkdsk/r c:\prompt when this ends 30 min to 3 h output type reboot system will see what happens. possible, you need a Windows reinstall.
Tags: Windows
Similar Questions
-
my laptop keeps going to the start page. No matter which option I choose, IE. safe mode, safe mood with networking, safe mode with command prompt, last known, good configuration start windows normally, it always comes back to the same screen. saw this post before and the invloved boot cd solution. I have not a cd ROM is there another way to solve this problem. Thank you people
Thank you for taking the time to make this post very informative, excellent. Without the machine test myself that I can't be sure, but based on the age of the computer and what you wrote I suspect for lack of material. It could be something simple like the hard drive or RAM or something more serious like the motherboard. I wouldn't recommend replacing any material on such an old laptop.
As long as the hard disk has been physically, you can recover your data easily. If the hard drive has failed, then you will need to send the drive to a professional drive savers data recovery company. It is quite expensive ($500-3700), but they can usually recover your data. Some insurance policies cover also, professional data recovery in order to check with yours. But let's be optimistic. ;-)
IMPORTANT - If there is no question that the drive is at fault - there are noises, for example - and the data is crucial NOTHING else ON THE DISC. Whenever launch you this player you can destroy data. If this is the case, send the drive to a professional data recovery company.
I'll give you the information on how to test the hard drive to see if it's good physically and how to recover data when you can't in Windows but in doing these things requires a certain level of computer skills. You know yourself the best and that it would be better to take the laptop to a competent local professional. If you do this, do not use a type of BigComputerStore/GeekSquad of the place. Get recommendations from family, friends and colleagues.
A. test equipment
Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)Boot with the CD that you have done and do a full test of the reader. You will probably need to change the boot order. Your Dell can give you a temporary boot menu if you press F12 as the computer starts. If so, use your arrow key to select the CD drive. Otherwise, press F2 to enter in Setup (BIOS) and change the order of boot on the CD drive first. If the disk fails all physical tests, it must be replaced. Although readers of the laptop cost around $60, you should really consider if it is to put money in such an old machine. You can replace the disk, but the laptop is definitely at the end of its normal life and something else is doomed to failure.
There is information about the RAM test and other materials here:
http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
B. retrieve data detach a healthy disk when you are unable to Windows
1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd.2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:
You will need a computer with two cd records, which is an engraver of CD/DVD OR a USB stick with a capacity to hold your data OR an external USB hard disk formatted FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.
* My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.
http://www.Knoppix.NET
http://www.nu2.nu/pebuilder/ - Bart PE BuilderC. recovery of activity for the future - http://www.elephantboycomputers.com/page2.html#Backing_Up MS - MVP - Elephant Boy computers - Don ' t Panic!
-
Need help with XP, you try to restore the system to the mode safe mode with command prompt.
XP does not start even in safe mode. Can access the mode safe mode with command prompt. Tried to use the repeated suggestion here. The said command is not available.
http://support.Microsoft.com/kb/304449 I tried these instructions from microsoft are supported and the command will not be accepted.
Any help out there?
Hello
1. What is the exact error message when you try to access the computer in safe mode?The issue seems to be with the corrupted registry that prevents Windows XP startup.How do I recover from a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545Note:
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756 -
When I tried to start windows normally it ran to 0 seconds, but nothing happened, pressed enter but screen will not change.
Without knowing anything about your computer and its recent history, I would like firstly, make sure the material is healthy.
http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
In the meantime, a good troubleshooting step is to boot with a Live Linux CD. I like Knoppix, but there are others. This has two advantages: 1) if the system works, you can back up all the data that missed your last backup; and (2) with the machine running Linux allows to determine whether the problems are caused by software or hardware. If the machine is unbearably slow and/or Linux cannot run correctly, you know that the hardware is at fault. If the machine behaves perfectly under Linux, you know that the software (Windows) is at fault.
If the material is solid, you can then try a repair installation. Unfortunately for you, a disc of the operating system is required for this. Maybe you can borrow one that corresponds to the version you have installed or...
If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).
MS - MVP - Elephant Boy computers - don't panic! -
Problem detected and windows has been stopped...
PAGE_FAULT_IN_NONPAGE_AREA
Technical information:
STOP: 0 X 00000050 (0X8DF1BA4C, 0X00000000, 0X805E9A54, 0X00000000
I have not installed new hardware or software in the last 3 weeks. This failure to start the problem started this morning. Computer was working fine last night.
I have the same problem, a slightly different number.
Stop: 0 x 00000050 (0xAC58B3AB, 0 x 0, 00000000 00000001, 0x805A3E33)
While trying to delete some KB as recommended Moreover here I also received:
SPCMDCON.sys - address F737D52E base at F737B000, time stamp 3d6dd67c, FWIW.
As I understand it a error 0 x 00000050 may be an error of memory, and I remembered a couple of old computers in the basement, I'll try a swap memory.
The system is a Dell Inspiron E1505, Windows XP Home Edition
-
I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.
Discussions were merged.
Deleted duplicate.
Original title: failure of the Dll
The error seems to be a common problem with Dell laptops:
It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.
Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:
http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers
-
Every time I start my system, the Lync appears, a modem exe shortcut. files also appears, how can I stop this?
I want to know the meaning of desktop.ini, I remove cause it's to show in most of my documents?
Your thread was started successfully in the forum comments, so I moved it to the windows 'Repair and recovery' forum where is is more on the subject. You must return to your topic and we tell which version of Windows you are using.
Look in your startup folder to see if you see Lync and modem.exe shortcuts in this folder. If so, remove them and you should no longer see these pop-ups when you connect.
You can get rid of him, but it can return. Desktop.ini is usually a file hidden, so you must have the display of hidden files and folders active if you do not see it. Desktop.ini is a file that is present in many files and it is used by the process to "customize the folder. It allows you to specify multiple behaviors to a folder and what desired icon displayed for a folder. See http://msdn.microsoft.com/en-us/library/windows/desktop/cc144102(v=vs.85).aspx for a more in-depth explanation of the desktop.ini file. For certain folders such as My Documents, you should probably leave it alone. It won't hurt anything especially if you do remove it, but the folder will then behave like any other folder, you can create.
-
Hi all
Basically, several months ago I noticed something strange on my computer - I know that I should have acted immediately - my Task Manager has been "disabled by Administrator [my]". Yet, I am the administrator!
Secondly, I lit my system yesterday and was immediately welcomed with a pale blue screen with lots of white, writing, that says, ' we recommend strongly you do not press "ENTER"...? If you do and you want to move before the expiry of the period...? " However, in time, that I tried to browse what was in front of me (that I was unable to catch everything), a 10 sec period had expired and many more white/numbers/text symbols suddenly started flowing to the bottom of my screen (for 15-20 seconds-from left to right)! In addition, my turn makes an unusual noise - as serious an alert! Immediately after, my system loaded up as usual!
So, I opened the Start Menu (after I restarted my computer to activate the Safe Mode) and the arrow keys has / not working -I can't navigate upwards or downwards to select one of the options! Yet, they have worked perfectly any other time since - just not in Start Menu! Then, I scanned with Windows Defender and nothing has found summer - my "system is safe."
Third, since then, I've noticed that my system (Windows XP) ran much more slowly too - informed the script is busy, plug-ins are insensitive, etc. - and the/things are / dragged across the screen! Therefore, I searched the forum and help guide to Firefox for everything that seemed similar and came across an instance of another person things 'slide' with a slow system, who suspects a virus! So, I followed the advice given to them - reset Firefox and download a "10 days free Microsoft Virus Scanner" (recorded under msert.exe); He set off to search for more than 9 hours, which found nothing/no infected files!
Finally, for all that, I can not use system restore or reset Firefox! I never pressed ENTER when the message appeared - do you think I should be?
I know that my version of Windows has expired and I plan to update very soon, but do not want to lose all the vital files. So, I am currently the backup copies.
All this activity may be connected? Or would it be different things are happening? And also, please could someone perhaps shed light on what happened or if they can help somehow? I would be VERY grateful.
Thank you very much
Bruce.
Since we have not heard from you lately, I will go ahead and tell you how to fix your problem disabled Task Manager (and probably a few other things):
Basically, when you see these errors, the usual advice is something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.
If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor because there is no Group Policy Editor in XP Home and that advice really doesn't tell you where to look in group policy, even if you run the Group Policy Editor (unless it's really good advice).
Basically, you need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that may have been disabled.
Unless you have disabled these things on purpose, chances are good that your system has a malware infection. The malware knows what tools you use to try to find and remove (like Task Manager), the malware disables the things you tend to use and prevents them from running if you can't find the malware and remove it.
If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.
The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP. This is what it would be like you, but these measures are not necessary.
You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.
No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).
If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.
These commands from registry removes the registry entries that are stop opening programs. Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.
Before making any changes to your registry, back up the registry with this free and popular tool:
http://www.SnapFiles.com/get/ERUNT.html
You can also manually create a system restore point before you make these adjustments.
Open Notepad (and only Notepad) to create a new text file:
Click Start, run and enter in the box:
notebook
Click OK to open a new Notepad file.
Copy and paste the following lines in BOLD text into the new Notepad file:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
"DisableTaskMgr" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
"DisableRegistryTools" = -.
[HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
"DisableCMD" = -.
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
"DisableTaskMgr" = -.
[HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
"DisableTaskMgr" = -.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"DisableCAD" = DWORD: 00000000
[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
"DisableConfig" = -.
[HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
"DisableSR" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoRun" = -.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoRun" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoClose" = -.
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoClose" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoSetTaskbar" = -.
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
"NoControlPanel" = -.Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:
enableit.reg
After you save the file, close Notepad.
Locate the file enableit.reg on your desktop and double-click it.
Alternatively, you can right-click on the enableit.reg file, choose merge or open with... and select the registry editor or import.
Answer in the affirmative to the question... Are you sure you want to add the information in the registry?
You should then see a message that information has been registered in the register.
Reboot your system and test to make sure the changes 'stick '.
You can delete the enableit.reg file when you are finished.
If the registry editor has also been disabled, you will see a message like this:
Registry editing has been disabled by your administrator.
We must therefore first difficulty (not a problem).
Click Start, run, and in the type box (or just copy / paste the entire order in the window run more safe) the following text:
reg delete HKCU/v DisableRegistryTools/f
Then see if regedit behaves (of course it will be).
-
The desktop icons are huge when we started the system
When we started our PC this morning, all the desktop icons are huge. Nothing unusual happened last night, how to make the icons of the return to a normal size? There is something to be concerned about the change in the size of the screen?
Hello
Back when he was like you wanted, try the system restore.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html------------------------------------------
Also right click on desktop - view - is set to medium or classic
and other opportunities:
Right click on desktop - customize - display settings - Set resolution.
Right click on desktop - customize - display settings - top left adjust font size (DPI)
CTRL + mouse wheel works ZOOM
CTRL + and CTRL - work ZOOM in and out
Your mouse/touchpad probably incorporates a ZOOM to it.
Your system also has a magnifier built in which could be a problem - it can also often be programmed to work
on mouse/keyboards.How to turn on the Magnifier On or Off in Vista
http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.htmlTo see if your mouse/touchpad is set to ZOOM or enlarge use Control Panel - mouse.
Keyboard/TouchPad/mouse probably also has Hotkey controls to verify with the help of machine to online system
documentation and their forums, where appropriate.I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
PhotoSmart AIO 7520: Could not find the place to activate the scan function when I start the system
My scan of the computer is turned off when I start the computer... How to activate it automatically?
Hello
Have you installed the software and driver on your computer? Can you see HP Scan in
Start > all programs > HP > HP [printer] > HP Scan?
You can click HP Scan from there.
Kind regards.
-
AutorunsDisabled window opens when you start the system.
Whenever I start my computer (Windows XP SP3), a Windows Explorer window appears showing the AutorunsDisabled folder. Nothing is in the folder. I installed Windows XP-KB967715 - x 86 - ENU.exe and MicrosoftFixit50471.msi of Fix - It of Microsoft in the hope of preventing the Windows Explorer window to appear whenever I start the computer. He still appears every time on starting the system or re - start. Can someone help me with this problem? Thanks in advance.
It's probably in your startup folder. Check. Start, all programs, startup. To remove the open disk (c), open Documents and Settings, open all users or the folder with your name (only in one, try all users initially), open a Start Menu, open programs, open start and if it is delete it.
-
When I start the system upward, it goes to my logon screen and the computer crashes
I have a windows vista computer and when I start the SUST until it goes to my login screen, I connect the Welcome screen comes the computer hangs... I do a control-Alt - Delete that returns the desk top
When you get on the desktop, open the start menu to search msconfig and press ENTER.
When the popup window appears, it should start under the general tab, and you should see normal startup. For now, set it to start diagnosis, press ok and restart the computer. If it still crashes, then replace the and set it back to normal startup, as something else is causing this problem.
If she does not hang, and then back up the, set back to normal and this time go to the Startup tab. The list is all the things that are set to start when you start your computer. One of them is causing the computer to crash.
If you have an idea that it might be that you can deselect it, apply, then reboot and see if it still crashes. Or you could just go in the list, one at the same time turn them off then restart suspended far, so you know which is the cause.
-
When I try to system restore it asks which program I want to open with
I had spyware called "vista defender pro" on my computer, so I downloaded "super anti-spyware", scanned my computer with it and deleted the spyware with it. Now, many programs have disappeared so I want a system restore, but when I click on system restore it asks me to choose the program I want to use to open the file. What can I do?
Hello
See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.
Check to be sure there is no persistent piece of malware.
There are MANY varieties of these with many names, but all can be eliminated with the same methods:
Vista Defender Pro is a scam to get you to pay for it, while it has no advantage at all.How to remove all THE varieties of this malware - please read carefully the removal Instructions.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
suddenly, last night something happened with youtube. whenever I run a video on youtube its green for a few seconds, then it goes back to normal. its also green when I fast forward/jump and when I change between full screen and windowed. I linked to a screenshot of how it looks as if I googled this problem I find something else where people get a green screen but no picture at all and that it lasts the entire video.
I tried updating the drivers for my graphics card. I tried to play on my nvidia card rather than use my intel graphics hd 4600 and still got the same result, but instead to get a green image, it was really dark almost black. I also tried to reinstall flash even downgrade to an earlier version, but nothing does. and the strange thing is that I only have this problem on youtube and only through firefox so I even tried reinstalling firefox, but that did not work either
I found 2 things of this kind of help.
the first solution is to disable hardware acceleration, but instead to get a green image for a few seconds, image frozen for the same period of time and then play and she is like when its Green, when I start it up, jump and change to full or windowed.the second solution I found in support for mozilla, to change the HTML5 player. But even if this player works great I really like it. for some reason any the break from the drive when I change between full screen and windowed mode and I don't like these pop-up windows get you that its now in full screen and I can press ESC to quit.
These are just little things, but I would like to return the standard player.
If anyone knows anything that could help me with this please let me know.This is the screenshot:
http://i1285.Photobucket.com/albums/A584/JimZiii/1_zpsb3d41a08.PNGWhat a little wild speculation?
YouTube uses a technology that has chopped videos in individual pieces, which is probably video serve more easily, but could create more opportunities for issues when moving in the video. There is an add-on called Center of YouTube that allows you to disable this technology and back to the days of one big file. Might be worth a try.
-
"Unfortunately, the content delivery Service has stopped" appears when I start the system.
Dear friends,
I use Thinkpad Tablet. Since the day bf yesterday, this message appears when the system startup is almost finished. Someone knows how is it? Thank you!
I solved this problem by the method in the post
forums.Lenovo.com/T5/ThinkPad-Slate-Tablets/quot-Unfortunately-Content-Delivery-Service-Has-Stopped-quot/TD-p/897731.
Maybe you are looking for
-
How can I prevent all automatic starts iTunes?
Hello Is someone can you PLEASE advise me how I can prevent ITunes turning prematurely gray? It starts with persistence without asking for confirmation. I want to be able to achieve is to prevent ITunes automatically start under ANY circumstances.
-
Size of the hard drive for HP Pavilion p6320y
Can I install a hard drive 3 TB of this computer? It will recognize a large? It includes a disk of 1 TB currently. Thank you!
-
[5 d Mark III] Why to start my file personalized with a underscore name
Hello world I'm confused. I implemented a custom file name (screen Menu: "Set Up 1"-> "user setting 2") with 3 individual letters and the image size. I have set up as 'GROSS', so the result should be like "RAWL0001.cr2", but file names always use und
-
connection problem G-mode network show limited
I use the alfa AWUS036H wireless card there are two types of network available (G & N, G) mode I could connect only N, G. G-mode network mode network show limited.
-
Windows live messenger how to remove
Somehow or other I bought the program from windows live messenger that appears in my taskbar and I find no way to get rid of this program I ever intend to use. Can someone please