When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

Similar Questions

• When I start the computer, it always asks to install fwupdate.exe, and I don't know where it comes from. I never allow him to update. __

  I have problems with the computer startup and fwupdate wants to install every time I won't.

  I have problems with the computer startup and fwupdate wants to install every time I won't.

• I tried to open a shortcut with Notepad and now each shortcut on the computer opens with Notepad and it's all over!

  So I need to edit this batch file, and I right-click on it to open it with something else. I found (which, it's logical!) particular option was not there.

  I created a shortcut for this, in the hope that the option within this drop-down list, which he was. I chose Notepad, then BAM. Every single shortcut on the computer

  opens with Notepad. I tried to click 'open with a default program', but who has just missed even more. But wait, it's even worse! Now my internet it is fucked up.

  Whenever I open it with its program file, it just opens upward from the downloads page; for Chrome and explore. I can't make a new log in because I gave a flash drive large enough to hold all the files that I need and I just need to stay on this one. Please help soon

  Jaden14541

  Hi Jaden14541,

  Please take a look at the article here with more troubleshooting for your question.

  I hope this helps!

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  Hey Abdul HamidNagoor,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  If the problem persists, follow the steps in the article.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• When downloading, by chance, I clicked on "always open this type of file. Now every time I download a file, the computer opens the first file. It's annoying. How can I cancel it?

  I use WIndows Vista on my computer.  When you download a file, I clicked on "always open this type of file.  Now every time I download a file, the computer opens the file first.  How can I cancel it?

  If you mean that you click always ask before opening this type of file which turned off, please see this article if this could help restore function:

  Re-enable always ask before opening this Type of file check box in Windows
  http://helpdeskgeek.com/how-to/re-enable-always-ask-before-opening-this-type-of-file-check-box-in-Windows/

  Scroll down to Windows 7 and Vista

  Important:  The article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

• Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.

  Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.

  See if anything here help: https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

• How can I block a program that I have not loading when I start the computer. What is own mac. It comes to start scaning and ask to activate. Is this something authorized by apple. If this is not the case, how can I stop it from loading up.

  Recently whenever I start the computer a program named Mac cleaning charge, stat my scanning system and ask to activate. It looks like a third party program that I should pay. Is it an accredited program for mac. If this is not the case, how can block this load upward.

  Is it called Advanced Mac Cleaner?  If so go here. http://AMC.Kayako.com/Knowledgebase/article/view/4/0/how-to-uninstall-advanced-m ac-cleaner

  It is malware.

  Edit: See post of Linc Davis on this topic for more detailed information.

  Advanced Mac cleanser

• my computer has two network icons, 1394 and con LAN. Either, especially the icon of LAN began to move to items being passed in the system tray when I start the computer.

  I have a new and strange behavior on my computer. Until recently, the two icons, 1394 connection and LAN icons always used to appear in the whole system tray after the computer has been started. Is no longer the case. Whenever I start the computer, I don't see the icon of LAN but discover that it attributed to items passed. Then I open the properties of the network connection, uncheck 'Show the icon in the system tray', click Apply + OK, then I open the properties, check the box again, click Apply + OK; only the LAN icon is displayed in the system tray. I'd appreciate any help with this problem. The situation is sometimes the reverse case, i.e., LAN icon appears in the system tray, but I find the icon to connect 1394 points ago. I put the properties in the Start Menu, the toolbar always showed.

  Hi ErhanKarabekir,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

  Method 2

  If the previous step fails to them it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well.

  Original title: Internet wireless connection

  I use a PC & a cable modem wireless to connect to the Internet.  When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified.  I wait a few minutes until what he says at last he is identified & seems to work very well.  The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web.  This could be a looming problem with the modem, or is it something else?  Should I consider it as my modem is still under warranty?  ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.

  Thank you

  [Transferred from Internet Explorer]

  Roll up your sleeves & cross your fingers...

  ACTIONS:

  [You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]

  1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.

  4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  Note: Good for IE9, too.

  4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.

  4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.

  5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]

  6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings

  Note => for best results, check the option Remove personal settings .

  7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].

  8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]

  9 restart once again & test.

  10. in response to this post with a status report.

  ==================================================
  [1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en

  [2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.

  [3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• error winxeb32. ROM when I start the computer...

  I'm getting an error like: error loading winxeb32.rom... every time I start the computer after that I have does not appear...

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• I get "Can'tOpenLogFileException ' when I start the computer

  When I start the computer, I get the following: path to the file Can'tOpenLogFile Exception: newspaper: C:\ProgramData\Juno\Accelerator\MainException.log,open mode: 10 to WinMain(.\main.cpp:170) caused by: failure of fopen with errno ErrnoException:Call (2) "no such file or directory"

  When I try to open Juno he opens not and said that Juno detected error then the next screen is a Windows form that says "Juno has stopped working.  A problem caused the blocking of the work programme...
  I need to open the Juno - Please HELP!  Relocation of Juno changes nothing!

  I uninstall Juno and then reinstall again - maybe that will create the appropriate links and do work (it cannot be initially installed correctly) - don't reinstall it just (uninstall first).

  If this does not work, please transfer your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where people who specialize in programs that are not Vista or IE will be more than happy to help you with your problem.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Creative cloud is grayed out when I start the computer...

  I'm on Mac. When I start the computer CC is grayed out in the menu bar above. So Typekit fonts are recognized when opening an Indesign document, then I have to go manually connect to CC.

  I thought that CC was just automatically started and total boot time? I didn't used to have this problem. Please notify.

  Please see Creative Cloud App and Sync fonts

• We went to MacOS Sierra of El Capitan and now have to log in twice, when we start the computer.

  We have upgraded to Mac OS Sierra of El Capitan, and now we have to log in twice, when we start the computer.

  How fix us this?

  Thank you...

  All the best...

  God bless...

  If you have activated the preferences-> Security-> FileVault system, then you must enter your password initially so that device drivers can decrypt your encrypted drive.  Once the system is running, you must then log into your account.

  They are really 2 separate activities that happen just to use the same password.

• Get a box to enter the password when you start the computer

  * Original title: turn my computer

  When I start my computer, I get abox asking you the windows xp startup password.  This has never happened before and I don't know the password.

  Hello

  -Have there been recent changes made on the computer before the show?

  I suggest you to check if you can connect to your account or the account of default administrator in safe mode.

  Check out the link for more information on how to enter Safe Mode.

  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  a. the built-in Administrator account is disabled by default.

  b. you will see an icon for the administrator on the homescreen mode without failure.

  c. connect you (the password will be a white)

  If you are able to start the computer in safe mode, try to check and restore the system.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Important: System Restore will return all your files non-system as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Please get back to us with the information above to help you accordingly.