When I take the Media Center it takes 4 minutes to load

Similar Questions

• White screen when I open the Media Center.

  Original title: Media Center white

  When I opened the Media Center, there is a white screen. I wouldn't change a thing and it has worked before. I have Vista 64 Home Premium.

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  The screen may be black or the menu screen may be unresponsive in Windows Media Center in Windows Vista.

  http://support.Microsoft.com/kb/935901/en-us

• When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

  When you use the media player, it is possible to take a song that's already torn in our library and announced another song or part of the same song at the end? kinda like a mix.

  Windows Media Player is not a Publisher.

  You can use Windows Movie Maker to split
  and combine audio files, but it works better
  If they are in the. WMA format.

  Also the free Audacity software may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity

  http://Audacity.sourceforge.NET/

  How to split a long recording into multiple files or CD tracks?
  http://Audacity.sourceforge.NET/Help/FAQ?s=files&i=split

  How to combine two files into one longer file?
  http://Audacity.sourceforge.NET/Help/FAQ?s=editing&i=join

  How to mix songs with Audacity
  http://www.ehow.com/how_5061510_mix-songs-audacity.html

• When you use Windows Media Center on the Xbox 360 DVD have not given chapter.

  After finally finding many questions I have my Xbox Media Extender and running upward and only this question left.

  I'm ripping my DVD to single file .vob she seems to like and plays very well, but it is only with the file movie and nothing else in the record.  How the XBOX sees it, the bed and he plays very well.  However I have no control outside the break and if I restart it takes over the job.

  Now if I rip my DVD with the .bup .ifo files in this folder the XBOX instantly he shoots in the list of the DVD and it will not play.

  When I use Windows Media Center on my PC it preforms even when the film is in the folder.  Then when I add bup and ifo data I can still play, but he has all data in the chapter that I need.  Shows all the chapters, allows me to jump as I please.

  How can I get my XBOX to behave like my PC?  I have to remove these 4 files in/out of the folder to see pop in and out of my list of XBOX.  How can I get the XBOX to validate data, so my movies actually have chapters and ignore the controls?

  Thank you

  Chris

  Hello, wilsman00

  As mentioned, by changing the VOB files, the data in the chapter are probably damaged. This can be confirmed by putting in a retail DVD in the drive and play directly from the DVD.

• the media center on my xbox freezes when the invalid application "cannot start symaddin." How can I fix

  The media center app on my xbox 360 crashes when the application invalid "unable to launch symaddin" appears. How can I fix?

  Hi DaveHale,

  Check if Windows Media center computer is very well as expected?

  Method 1: I suggest to put the computer in a clean boot and check if still face you the problem of gel.

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Method 2: Disable your antivirus/firewall software temporarily and check if it is the problem of gel.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Sure to soon after troubleshooting is performed.

  Method 3: try the steps from the following link:

  When you use online media in Windows Media Center Extender on a video game Xbox 360 system, Media Center closes
  http://support.Microsoft.com/kb/934542

  Additional information:
  http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-setup/clear-system-cache

  Tips to troubleshoot installation with Windows Media Center Extenders (Applies to Windows Vista)
   http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders#section_1

  If the steps above fail, then I suggest you to post:
  http://forums.Xbox.com/xbox_forums/community/default.aspx

• 0 x 80070011 when you try to add the Media Center of Windows 8 Pro

  I am attempting to add Windows Media Center to my installation of Windows 8 Pro but get an error message saying something with evil.  Looking at the logs, I see that the problem is "DoTransmogrify failed due to error 0 x 80070011" which indicates there is a problem with my user directory is on a drive other than the Windows folder.  Since I have an SSD relatively low to start I moved my user to a much larger hard drive folder.  Should not directory junctions work the same as if the file was on the same drive?  Is there a work around short replacing my user on the c: folder?

  Thank you!

  I had a similar problem with window 8 RSAT tools that lead me to this post in my search for a solution. I'm not positive that this will solve your problem but it worked for me. Because the Setup program does not seem as follows symbolic links that point to different disks, I simply said the installer the real location of the profiles it is updated during the installation. Open the registry editor and navigate to:

  HKLM\Software\Microsoft\WindowsNT\CurrentVersion\ProfileList
  Change the location of the "Default", 'ProfilesDirectory' and 'Public' StringValues to point to the real target of your users path a symlink on drive c. (IE. "D:\Users\*).
  Run the Media Center Setup
  Change back the path in the registry.
  (I'm not positive that this is necessary, as you'd still have the symbolic link on your C drive as points that anything using this path to the right folder, I just changed it back to %SystemDrive%\* so that I could test to see if the RSAT tools has always worked without the explicit path used in the registry.)
  Good luck. I hope this works.

• Digital Cable Set Top Box connected to the Media Center computer, forced to keep MC on the use of channels 3-cant TV Guide in Media Center to record

  I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record.  For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00.  This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator?  Basically, the decoder is a decoder which makes us put all our TV on channel 3.  But the cable ready TV I hear do not need the box, they can use another device.  The computer can do the same?  Nobody seems to have no answer to this problem.  Help!?

  I read your question. I asked you what happened when running
  TV Setup and specifically want to know if the TV Setup detected your set top
  Box/decoder and it happened. If Media Center does not automatically detect your decoder,
  have you tried the manual method to learn codes? I'm trying to help you
  features of Media Center EPG.
   
  You must ask the FIOS people if they have the equivalent of a DTA
  offered in the world of cable and OTA.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Static IP remote access for the media center

  I NMH410 work through a WRT610N router.   My ports are configured for static IP access.  Seems to just going through www.ciscomediahub.com does not work well for me.

  Can someone provide the 'exact' URL I would enter in order to access my media center?

  Documentation of assistance through Cisco shows: https://Wan_IP_Address but that doesn't seem to work.  The demand is just there and finally once outside.

  To everyone:

  Apparently, I discovered and corrected the problem that I had with 'Remote access' to my Media Hub.

  Somehow, there are two configurations of router that had to be done.  On two port forwarding configurations has been necessary and once allowed me to access the media center.

  It seems that my ISP has a 192.168.x.x address router that was different from the address of my router 192.168.x.x.  It is on the home router when I incoming and make changes to the information of port forwarding.  The fact that I was getting an error message indicating that I wasn't even reached my router alerted me to the fact that my ISP was blocking remote access.  In the end, that's where my problem was discovered.

  Translate:

  If you have problems to access your media "at a distance" pole through its IP address (and not by the cisco media center), make sure that you configure the ports of the router specified by your Internet provider address, as well as the ports of the router that you have on your network home.

  I have forwarded port 443 on the two addresses of router port, and I can now access my media hub remotely.  Now if I can't play videos remotely, I'll be set.  This leads to another problem that I'll send it in another thread.

  Thanks for the help and suggestions of each.

• No sound when playing movies through Media Center

  I can watch TV, play movies through third-party software and the sound is great.  I go through a system of 5:1 and all speakers work.  However, when I try to play a movie in the film library of the Media Center, I don't hear sounds in the background, no track of voice!

  What gives?

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center S.Sengupta Media Center MVP

• I keep losing my connection to the Media Center on my D-Link DSM 750

  I keep losing my connection to the Media Center on my D-Link DSM 750 when you try to view the video library. Music photos and everything else works fine?

  Hi Ghostrider457,

  Are a. When you facing this problem?

  B. you get errors?

  C. recent changes made on the computer?

  Method 1

  Try temporarily disabling the firewall/antivirus software and check if the problem persists.
  Turn on the firewall / antivirus after you check the status.

  Method 2: new user account

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try and tell us the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Xbox 360 will not connect to the Media Center after that PC has been asleep

  My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.

  Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.

  Hello

  (1) did you make any changes before the show?

  (2) is the specific question when the computer wakes from sleep?

  This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.

  Method 1: Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Method 2: Windows Media Center Extender: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Reference:

  Set up Windows Media Center on the Xbox 360 (Windows 7)

  http://support.Xbox.com/en-in/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Windows-7

  Let us know if that helps.

• UPnP search fails when adding Xbox 360 Media Center Extender

  First of all, I spent a week looking for a solution to this so if I missed something obvious, I apologize.

  My xbox has been connected as a media center extender to this combination of the computer and the router for several months now. The router is a WII-HP-G300NH Buffalo. Earlier this week the media center extender was having video playback problems. After restarting the computer, the Extender was is no longer connected.

  When I try to add a new extension unit I get the message "unable to add extender. Microsoft says to activate upnp and multicast. Check. Reflashed firmware dd - wrt. No luck. Back to buffalo firmware. No luck. Try an old Linksys WRT54GL I hang out. No luck.

  The event recorder has this error: "Media Center Extender Setup has failed as the Extender has been detected on the network unsuccessfully searching for UPnP for the Extender (timed out after 20000ms)." Event ID: 538

  Now, I did everything I could find on the activation of network discovery, anything allowing to access media and these. Network and sharing Center is located about large open. I also tried switching between home and work networks.

  That said, I decided to check and see what updates have been installed. It turns out that an update has been applied on the day, that I started to have problems. It is said that it can not be uninstalled. Description Windows 7 and Windows Server 2008 R2 installation software item updated

  Note: I have no system restore points. Small SSD and has not taken the time to understand how to save elsewhere.

  That's all the information I have. I convinced myself that it is not the router via the steps described above and that it is something to do with the computer. Help?

  FIXED.

  Reinstalled NIC drivers.

• Qosmio G20-111: after disk HARD changing the Media center does not work

  Hi, I have a WME Quosmio G20-111, after a hard drive, toshiba support center evolution (disc hard bone) in Italy has reinstalled the WME but whenever I try to use the Media Center pc crash and show me a white screen. After several phone call they told me that the problem is that they don't update quosmio drive drivers?
  I'm desperate, any suggestions?

  [email protected]

  Hello

  Well, as far as I know that the Qosmio Player has been installed on the partition hidden on the new laptop, but perhaps the ASP is not install this application after replacing HARD drive.

  But I do not understand why the missing Qosmio Player should have a bad influence on the media library? MC is a Microsoft program that is part of the Windows XP MCE. Player of Qosmio is an invention of Toshiba and should have nothing to do with the MCE.

  However, you can try to install the Qosmio Player and then try to recover the entire operating system with the recovery CD Toshiba original delivered.

  Maybe it helps.

• I am now on iOS 9.2 Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the settings, it freezes and then crashes. Please Apple can solve this problem of Game Center iOS 9.2.

  I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.

  Hello Vaishnav,

  Thank you for using communities of Apple Support.

  I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.

  First force quit Game Center.

  1. Press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. Swipe to the left to find the Game Center app to close.
  3. Swipe up on the preview of the Game Center to close.

  Force an app to close the iOS

  If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.

  Use iTunes to restore your iPhone, iPad or iPod to factory settings

  Best regards.

• How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  online media, absent on the media library

  How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  Check the settings of language and the region under the Control Panel, make sure that it is there.

  You can also try a manual download by pressing 'Download now' tab under tasks > settings > General > automatic download in WMC options.

  Make sure that during this firewall or IPSec is does not interfere with the download.

  If the above does not help then run Setup again.

  [Tasks > settings > General > installation Windows Media Center > rerun him.]

  Make sure you have the latest version of Silverlight or Adobe Flash Player installed.

  S.Sengupta Media Center MVP