When I try and print from the internet, I get a message to add a printer but I can print emails fine.
When I try to print the Web form, I receive a message to add printer, when a printer is already connected and working. I can't print at all from the internet but you can print emails
Hello
1 have you made changes to your computer recently?
I suggest you to follow the steps below link Microsoft and see if it works:
You cannot print or print preview Web pages in Internet Explorer on Windows Vista or Windows 7
http://support.Microsoft.com/kb/973479
Concerning
Tags: Windows
Similar Questions
-
Wireless connections
I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?
Hello
I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?
You can also try the following methods and check if it helps.
Method 1:
Update a network adapter driver.
Method 2:
Troubleshoot network adapter problems.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems
-
Recently, I restarted my computer and received the following message is displayed:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows
Normally.Safe mode
Safe mode with networking
Safe mode with command promptLast good Configuration known (your most recent settings that worked) start Windows normally
Use top and down arrow keys to move the selection of your choice.
.
Seconds until Windows starts: 30 "After I tried all the options available, but whenever I do it, windows is only a blue Flash of a screen and then brings back me to the same menu over and over again.
I can NOT CONNECT AT ALL even in safe mode (by connection, I mean I can't access the section Office at all - case im explained does not this right). as soon as it reaches the load to windows xp my computer screen restarts as if I am the ' turn off and turn back on.
I tried to perform a repair of Windows through my cd of instalation installation, but it just took me a blue screen saying there was a problem and he had to shut down to avoid damage. He also told me this: * 0x0000000a (0x00000002, 0x00000000, 0 x 00000018, 0x80819b92)
The computer is an emachine and was purchased at a walmart nearly 5 years ago and it worked fine until one day it started to do this. I can't access any of my files or anything. It must be a software problem, because since then I checked all the problems of material possible and found nothing. the result of this is that I can't use my computer. It is a desktop computer and was reliable until it happened. I'm not sure of the cause, and I think it's something wrong with the operating system. I have tried everything I know and need help as soon as possible.
Hi josiahgenesis,
· Have you been able to launch the repair facility?
Try the following.
Method 1: Try to select disable automatic system failure reboot from the advanced boot menu options to see if it helps.
Method 2: Check to see if the following is useful.
You receive an error message "Stop 0x0000000A" in Windows XP
-
I have photo stylus epson rx 520 when I try and print from the internet he prints only on the left side, how do I set back to A4 portrait advice please. I have windows 8.1
Petersrex
You the best solution is to contact Epson. We don't support Microsoft products on this site and they know their best products.
-
When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.
Hello bdoolen, please try to reset firefox and see if that can solve the problem...
-
error message when I try to connect to the internet wireless
When I try to use the Internet, I get a message saying 'the settings saved on this computer for the network do not match the requirements of the network. I don't know how to change the settings so that it works.
Hello
Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
Update your WiFi drivers on computers. How you are positioned in the router? Are there
obstacles in the path? Good luck that the router settings have changed, or maybe it was
reset - do you have other computers that connect to this router? You system connects to other
WiFi as a library, Starbucks or other sites?Actually try updating your driver and disabling the network logon.
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx------------------------------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT. Start - Connect To log on to the network.-----------------------------------------------------
Check this box:
Strange problem with Internet under Vista
http://www.catonett.com/blog/archives/194Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
http://support.Microsoft.com/kb/928233/en-us----------------------------------------------------
And:
Network connection problems
http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet
Hi evilcrebyc,
Consult the following Microsoft articles and make sure that all settings are correct.
How to configure Internet connection sharing in Windows XP
http://support.Microsoft.com/kb/306126
Troubleshooting Internet connection sharing in Windows XP
-
Original title: new laptop user
I recently got a laptop EEE. When I try to connect to the internet via the usb cricket modem thing, I get an error ras entry creat/change. I tried to set the automatic start, but when I click the button start I get an error 1068. Any help?
Hello
I suggest you follow the troubleshooting steps form the article and check if it helps.
"Error 1058" error message appears when a service stops unexpectedly
http://support.Microsoft.com/kb/241584
Also refer to this article and check if it helps:
"Error 1068" error message when you try to enable Internet connection sharing
http://support.Microsoft.com/kb/827328
Note: Also valid for Windows Vista
-
Loading of the Internet
Whenever I try to download a file from the internet it get the same message everytime "he could not open the Internet Explorer Web site. The site requested is either not available or cannot be found. "Please try again later ' this happens for all sites, I try to download from... Please help.Hello
To work around this problem, follow these steps:
1. start Internet Explorer.
2. on the view menu, click Internet Options.
3. on the Advanced tab, clear the do not save encrypted pages on the
disk check box.
4. go to the page where you received the error.
5. right click on the file link, click on save target under, select one
destination and then click Save.
Good luck! -
error when you try to download on the internet.
Help!I get an error; "Extended attributes are incompatible" when I try to download on the internet. Why and what to get fixed?
Need your help as soon as POSSIBLE. Thank you.
Sincerely,
Melinda
How is it related to the installation, upgrade and activation of Windows Vista?
Tell you download or install?
If you mean install:
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/the-extended-attributes-are-inconsistent/129b7935-2da2-47B2-8b4d-e8b581e12b54
-
When I try to connect to the internet it tells me I need network drivers.
Original title: Windows 7 drivers
Hi, I recently built a computer with a motherboard Asus H81M-E. I installed Windows 7 pro 64-bit. When I try to connect to the internet it tells me I need network drivers. Where can I find the drivers? There are all the other drivers that I need to install for the computer to function properly? Thank you for reading, I hope you can help.
I don't know a lot about the generation of computers, but I don't know that you need a network adapter to connect to the internet, which would be listed in the Device Manager. You really need to go to the asus help and support. But to give you an idea of what adapter need use Google to search for: asus h81m-e network driver
Good luck
-
Hi all
I had problems with my Toshiba Satellite A665 to internet connection. Lately when I try to connect to the internet, for the first minute or so it says 'No internet connection' (or something similar). Basically, he has the yellow warning triangle. Sometimes I can open the browser and search normally, but other times - and this happens more often it won't let me use my browser. When I have not fix the problem, he said that the DNS server is not responding. The problem is this same error happens all. unique. time. and the other computers in the House connect to the internet just fine. I called TWC and what I get on their part, it is "there no reported outages in your area. Useful, right? Tends to be gnawed by the use of Netflix and Hulu Plus, but this has never kept internet bandwidth to work in the past. What is going on? I'm so tired of having to go all the way down the stairs to reset the router every hour (on a good day) to get the computer to connect to the internet.I contacted Toshiba and they say that all the drivers on your computer are up to date and nothing is broken. I have also not downloaded or installed anything on my computer.If the reset of the router fixes the problem you should probably watch that as the culprit. Check the software/firmware for the router and see if you can borrow to someone router to test.
I hope this helps.
-
Download error when I try and click on the apps section [was: download]
When I try and click on the apps section in creative cloud that it says download error please contact customer. Can someone please tell me what this means in order to fix and continue with my school.
Windows or Mac?
What is the full error message? like its saying, Installer is no longer functional or unable to reach the server Adobe... etc?
If possible after the screenshot of the error message.
Wired Ethernet or Wireless/Wifi Internet access?
In the meantime, try with the steps mentioned in the link below:
https://helpx.Adobe.com/creative-cloud/kb/download-error-apps-tab.html
-
CARS: 2 nodes with Oracle single Client Access name (SCAN)
OS: OEL 5.4 64-bit
Version: 11.2.0.3
When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).
servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))
serviceBD service
SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;
METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS
---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----
serviceBD BASIC SELECT 180 NO LONG YES
But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.
Node 1
servicioBD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
Or
Node 1
servicioBD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))
)
(CONNECT_DATA =
(SERVICE_NAME = orcl)
)
)
I have also observed the following (cluvfy).
1 all LISTENER_SCAN running node 1
2 there is no TCP connectivity
3 the error message is obtained PRVF-5713
[grid@rac1 ~] comp cluvfy $ scan - verbose
Check scan
Checking the single Client access name (SCAN)...
ANALYZE the running node name? ListenerName Port running?
---------------- ------------ ------------ ------------ ------------ ------------
scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1
scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1
scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1
Checking TCP connectivity to ANALYZE listeners...
Node of ListenerName TCP connectivity?
------------ ------------------------ ------------------------
RAC1 LISTENER_SCAN1 no
RAC1 LISTENER_SCAN2 no
RAC1 LISTENER_SCAN3 no
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.
Check the resolution settings of name to 'scanvip.domain1.local '...
SCAN the IP address status comment name
------------ ------------------------ ------------------------ ----------
scanvip.Domain1.local 10.210.2.18 spent
scanvip.Domain1.local 10.210.2.19 spent
scanvip.Domain1.local 10.210.2.17 spent
Verification of the installation program ANALYZES VIP and the listener has failed
The analysis check failed on all specified nodes.
Could someone help me please.
The solution was to restart scan_listener.
srvctl stop scan_listener
srvctl start scan_listener
-
Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one. I see my movie library where it is stored on an external hard drive, but my music was on my iMac.
Where all the playlists gone and why didn't appear my entire music library? I checked the preferences and iTunes points to the correct folder, BUT only my music purchased appears...
Same thing happened to me. I tried to replace iTunesLibrary.itl with an older copy, but that has not worked. Then I tried to return a version by resetting the Time Machine's iTunes app, but it would allow me to edit or delete iTunes because it is part of Mac OS X.
So, I can not sync my iPad or iPhone, update all apps or find my music, that is, the course of the odf, still on my hard drive. ITunes just can't see the library.
The difficulty of this Apple.
Maybe you are looking for
-
How to view a pdf file online in the body of the browser
I am having some problems in interaction with pdf documents online with a Web site called Equator.com. I use the latest version of Firefox (10.0) and running Mac OS Lion. What can be done to fix this problem?
-
I'm used to be able to check my backup of disk utility disk. I now use El Capitan 10.11.1 on an iMac and can't find this option. When I try to run first aid on the backup drive, she fails. Can someone tell me how to check the disk please, thank you
-
Hi I have lost the icon App Store on my iPhone 5s and cannot download apps. If someone can guide to relocation?
-
Free Windows 10 Upgrade for Inspiron N4110 - is it ready?
This morning, I discovered a Windows 10 logo on my notification bar, clicking on it shows that I am now eligible to download Windows 10. I have a Dell Inspiron n4110, processor Core i3, 4 GB RAM, Windows 7 Home Premium 64-bit. I use mostly my laptop
-
Bluetooth PC/Z10 10 blackBerry questions
I try to connect my Z10 to my laptop via bluetooth. They are both paired, but does not connect. I want to transfer contacts via blue tooth. Any ideas I do this?