When I try to boot from the rescue disc I get a blue screen

Similar Questions

• "Hang on" VM when you try to boot from the CD-ROM host or .iso

  I would appreciate any help on a problem I have. I just

  installed VMWare server 2.0 on a Server 2003 64-bit computer. I tried

  creation of 2 new reviews VM but I am unable to install an OS that I can't

  make use of the CD-ROM. If I "Add Hardware" and add the CD-ROM drive.

  Reset the computer I actually see the spinning of CD-ROM and the

  light on as if it is reading, but the VM console is just empty. Just a _____

  in the upper left corner. Same thing if I try to use a .iso. So I have

  Cannot use the CD ROM or a .iso file. That someone has it all

  suggestions? Thank you very much.

  Hello again. You can start any .iso image? What happens if you try to boot from the memory Tester ISO I have attached to this message - works very well with guests on my host server 2.0?

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Satellite A210 - 128 (PSAELE) turns off when you try to boot from the CD/DVD

  Hi all. I have a (serious) problem.

  I bought my Toshiba two years ago (it was brand new) with Windows Vista already installed (vista and boot partition). Now I'm trying to boot and install Windows 7 Ultimate, but after I select boot from CD/DVD and start the copy of the system files, my Toshiba * turns *, completely. Overheating is not the problem for sure.

  Anyone with a similar experience or everything to know about how to solve my problem? :(((

  Thnx,

  Stipe

  Hello

  Why you are sure that your computer laptop isn't overheating? In my view turn is the typical pattern of overheating and you must clean your laptop using a jet of compressed air. This could blow out the dust from the cooling fans.
  Check this box!

  You have this problem when you try to install Windows 7 or make this happen with the Toshiba recovery disc too?

  Maybe during the process of copying the files will be written on a bad sector on the HARD drive and so he shuts himself who knows?

• restarting my computer on windows xp load screen when I try to boot from the disc, I get a blue screen can someone help me?

  Recently, I restarted my computer and received the following message is displayed:

  "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last good known Configuration to return to the most recent settings that worked.

  If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button has been activated, or if you are not sure what caused the problem, choose Start Windows
  Normally.

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Last good Configuration known (your most recent settings that worked) start Windows normally

  Use top and down arrow keys to move the selection of your choice.
  .
  Seconds until Windows starts: 30 "

  After I tried all the options available, but whenever I do it, windows is only a blue Flash of a screen and then brings back me to the same menu over and over again.

  I can NOT CONNECT AT ALL even in safe mode (by connection, I mean I can't access the section Office at all - case im explained does not this right). as soon as it reaches the load to windows xp my computer screen restarts as if I am the ' turn off and turn back on.

  I tried to perform a repair of Windows through my cd of instalation installation, but it just took me a blue screen saying there was a problem and he had to shut down to avoid damage. He also told me this: * 0x0000000a (0x00000002, 0x00000000, 0 x 00000018, 0x80819b92)

  The computer is an emachine and was purchased at a walmart nearly 5 years ago and it worked fine until one day it started to do this. I can't access any of my files or anything. It must be a software problem, because since then I checked all the problems of material possible and found nothing. the result of this is that I can't use my computer. It is a desktop computer and was reliable until it happened. I'm not sure of the cause, and I think it's something wrong with the operating system. I have tried everything I know and need help as soon as possible.

  Hi josiahgenesis,

  ·         Have you been able to launch the repair facility?

  Try the following.

  Method 1: Try to select disable automatic system failure reboot from the advanced boot menu options to see if it helps.

  Method 2: Check to see if the following is useful.

  You receive an error message "Stop 0x0000000A" in Windows XP

• If I get the dvd of recovery to win s 7 of the manufacturer, what problems is I meet when I try to boot from a usb dvd player

  Separated from this thread.

  OK here is what I was asking.  If I get the dvd of recovery to win s 7 of the manufacturer, what problems I will get when I try to boot from a usb dvd player.  I worry because my computer is uefi firmware. should I disable secure boot, make sure the dvd usb drive first in the boot order.  What other bios setting I would be worried.

  You will get a facility better if you find the ISO to create such media as discussed in step 1 of the clean reinstall Windows 7 follow these steps to get the best possible installation.  You can even create flash media if that's easier for you.

  Regard to Recov disks that reinstall all the bloatware factory, Yes, you must disable Secure Boot in firmware that doesn't support UEFI to install Windows 7, and then start the media as a UEFI device.

  After installation, you can pick up some performance and optimize the installation by following Clean Up Factory Bloatware .

  You can also do a Clean install Windows 10 improvement using the Windows 7 product key, as this is explained in this link.   You can at any time change to Windows 7, even move back and forth until only is installed at the same time.

  Let us know if there are any questions and how it goes.

• Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

  Hello

  I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

  I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

  I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

  I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

  See you soon

  Usually start up to a blank screen without the Apple Logo, may report one of the following:

  • Hardware failure
  • Boot drive is not recognized as valid and updated updated
  • OS X essential software is missing, hurt moved or renamed or corrupt
  • A firmware update is necessary

  No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

  Alternatively, you can try holding down the C key to try to boot from the external drive.

  If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

  Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

• When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle

  CARS: 2 nodes with Oracle single Client Access name (SCAN)

  OS: OEL 5.4 64-bit

  Version: 11.2.0.3

  When I try to connect from the client to the RAC by using the SCANNER, I get ERROR: ORA-12541: TNS: no listenerOracle. I noticed that the service is in place and properly configured (client tnsnames).

  servicioBD = (DESCRIPTION = (LOAD_BALANCE = yes) (ADDRESS = (PROTOCOL = TCP)(HOST = scanvip.domain1.local) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = serviceBD) (FAILOVER_MODE = (TYPE = SΘLECTIONNER) (METHOD = BASIC) (RETRIES = 180) (DELAY = 5))))

  serviceBD service

  SQL > select name, failover_method, failover_type, failover_retries, goal, clb_goal, aq_ha_notifications from dba_services where service_id = 3;

  METHOD NAME TYPE PURPOSE CLB_GOAL AQNOT ATTEMPTS

  ---------------------------------------------------------------- ----------- ---------- -------- ---------- -------- -----

  serviceBD BASIC SELECT 180 NO LONG YES

  But when I do not use the service created for the tnsnames file SCAN, it's that if I directly put tnsnames to connect to any work of two nodes very well.

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.10)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  Or

  Node 1

  servicioBD =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.210.2.11)(PORT = 1521))

  )

  (CONNECT_DATA =

  (SERVICE_NAME = orcl)

  )

  )

  I have also observed the following (cluvfy).

  1 all LISTENER_SCAN running node 1

  2 there is no TCP connectivity

  3 the error message is obtained PRVF-5713

  [grid@rac1 ~] comp cluvfy $ scan - verbose

  Check scan

  Checking the single Client access name (SCAN)...

  ANALYZE the running node name?      ListenerName Port running?

  ----------------  ------------ ------------  ------------  ------------ ------------

  scanvip.Domain1.local 1521 LISTENER_SCAN1 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN2 true true rac1

  scanvip.Domain1.local 1521 LISTENER_SCAN3 true true rac1

  Checking TCP connectivity to ANALYZE listeners...

  Node of ListenerName TCP connectivity?

  ------------ ------------------------  ------------------------

  RAC1 LISTENER_SCAN1 no

  RAC1 LISTENER_SCAN2 no

  RAC1 LISTENER_SCAN3 no

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.17) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.19) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  PRVF-5713: command "/u01/app/11.2.0/grid/bin/tnsping" (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.210.2.18) (PORT = 1521)))'"running on the node"rac1"produces no output no output.

  Check the resolution settings of name to 'scanvip.domain1.local '...

  SCAN the IP address status comment name

  ------------ ------------------------ ------------------------ ----------

  scanvip.Domain1.local 10.210.2.18 spent

  scanvip.Domain1.local 10.210.2.19 spent

  scanvip.Domain1.local 10.210.2.17 spent

  Verification of the installation program ANALYZES VIP and the listener has failed

  The analysis check failed on all specified nodes.

  Could someone help me please.

  The solution was to restart scan_listener.

  srvctl stop scan_listener

  srvctl start scan_listener

• Downloaded image .iso, burned on a CD, try to boot from the CD, but don't get 'ISOLINUX 3.63. "... The kernel image is not found: linux

  Try to boot from the CD

  ISOLINUX 3.63 2008-04-10 Copyright (C) 1994-2008 h. Peter Anvin

  The kernel image is not found: linux

  boot:

  =========================

  ProLiant ML310, dual core processor Intel D series, 3 GB of RAM, 2 x 160 GB hotswap

  So what to do then? Everything boots on this device, Ubuntu, Debian, Windows 2003, etc.

  Any tips?

  Kind regards

  Reg

  Verify the signature of the downloaded ISO file MD5?

• How can I get WIndows8 TouchSmart to boot from the recovery disc

  How can I get WIndows8 TouchSmart to boot from the recovery disc? With the recovery in the drive disk when I do a reboot or stop and start it does not read anything from the DVD player. My computer is a HP TouchSmart 23-D160QD.

  @AirForce9731,

  You may need to change the boot order to boot from the DVD drive first.  The steps to do this are in the document below.

  http://support.HP.com/us-en/document/c00364979

  These are recovery disks made by the recovery discs sent by HP?  They will not work in a different system (you will receive an error message), but you are able to get the boot floppies in a different system?  They should be able to start up to a point where the error message will be displayed.

• Windows Mail is not refreshing since 09/02/2012. When I try to update using the F5 key, I get the error messages.

  Windows Mail is not refreshing since 09/02/2012.  When I try to update using the F5 key, I get the error messages.  The only way I can see me new emails is to sign on the web page of my Internet service provider, which I don't like.

  original title: windows mail is NOT refreshing

  It would be useful that Microsoft has put a notice to have several products access our email accounts so that us non-technical people could avoid these problems.

  Maybe it's something that Apple should warn the consumer. I have three e-mail accounts and I receive and send all the accounts on three different computers at the same time and have never had this problem. Your case is the first.

• When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  When I try to turn on the Windows Firewall, I get a sign message that says "Due to a problem not identified, Windows cannot display the firewall settings."

  I found another thread in Microsoft Answers relating to this problem, but who said to go into Services and see if the firewall is configured to automatically start.  However, I can't find a Windows Firewall item in the Services Menu.

  I have the PC Tools Spyware Doctor antivirus.

  I had to do a complete recovery system... which sets just need to make sure that you back up your files.

• error message when you try to print from the windows photo gallery

  I can't print the Windows Photo Gallery photos: failure of the Document to print - load plain paper.  I reloaded paper, updated printer drivers and called Dell technical support, who said it was a software isue since I can print other documents as well as photos from Photoshop Elements. I get the same message when I try to print from painting and the image viewer. Looks like a problem of microsoft.
  My printer is Dell V515w and is 4 months old.
  Even if I can use Photoshop Elements, it is easier to use the Windows Photo Gallery.  Any ideas?
  Thank you
  Richn13

  Hello
  See this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/trouble-printing-from-Windows-Photo-Gallery/456cc8bf-9791-4619-82e2-de121deec9d3

  Let us know if it helps.

• Can not boot from the recovery disc - 0x000000D1 Driver_IRQL_not_less_or_Equal

  original title: cannot boot from the Vista recovery disc

  A real problem. Vista is prompting me to boot from my recovery disc and allow the repair of Windows. However, when I insert the disk it shows loading Windows, but once he starts to launch I get the BSOd with the "Driver_IRQL_not_less_or_Equal" error report with the error code Stop 0x000000D1. I searched on advice but all I can get into the repair mode, but I can't. F8 does not work in safe mode. Week last ChkDisc has run on every start and yesterday I received a number of parts of Vista won't load does not with error reports. Today, it started with Windows can not load the warning and instructions for use the recovery disk... I'm in a loop as I cannot cross the BSOD! Help please

  Mick

  Computers are strange animals. After my response to you, I had another attempt to go beyond the blue screen. Hey hop this time my computer decided that he had enough rest and proceeded without delay to start and I would like to action, the recovery disk. There then reinstall Windows Vista and am now to a new computer! It's time to move to Windows 7! The only thing I did yesterday was to unplug my printer to my laptop!

• I want to use the recovery disc for re - install my pavilion dv6, but cannot boot from the recovery disc?

  Now my system Windows 7 Home premium canbe accessed, but with a lot of problems. That's why I want to reinstall it. I burned my own recovery (totally 4 disks) successfully disks. I insert the first disc of recovery CD-rom and restart my laptop, but it can not recognized but in win 7 automatically. could you tell me how to use my recovery disks to reinstall the system win 7 when that is not totally broken?

  Hello

  Probably go to BIOS and configuration of the machine to boot from the CD/DVD ROM. Please follow the instructions from HP:

  http://support.HP.com/us-en/document/c00364979

  Kind regards

• Equium A100 - unable to boot from the bootable disc

  Equium A100-549

  My son s partner has a 2 year old Toshiba which has become slow over time. I had done a backup of the system with office installed etc using Acronis. Anyway, decided to rid running Acronis and recorded image. The program runs normally, and he falls down to a denial of service as the ready to restore screen. It is then with the cursor flashing as usual and then it crashes, and doesn't allow you to access the image.

  I am that it can be altered, so reinstalled Acronis. Make an Acronis boot disk to run the image, and he does not take into account the disk boots directly to the normal hard drive (IDE 0) still no joy. Then I tried the restore of laptops disc. In the BIOS, I said peripheral CD as everything first and also the restore disc says place in the drive and turn off.

  While it starts up press F12, which brings a menu allowing you to boot from the CD drive. I did, but it doesn t appear to look at the CD and just load windows from the HARD drive. I removed the CD for system devices and rebooted. He found and added the new device to herself and asked to reset. Still no joy!

  Scanned with Norton, but still not good. Norton removal. The result is the same. Able to read the CD and also write to it as well. Diagnosis Toshibas ran on the unit and everything seems ok with it.

  Tried to make a bootable flash stick on floppy, but it is ignored, well specified the amorçage using other devices.
  Basically, it seems that I can t get it to watch prior CD onto the HARD drive.

  Flashing the BIOS would heal it? -Registry error causes this?

  Y at - it everywhere where I can talk to someone from Toshiba about this?

  Any info / help much appreciated

  Hello Nick

  Put the delivered device DVD recovery DVD and turn on the laptop. Press the C button and keep it pressed for a few seconds. This will force the DVD player to read the DVD, and I hope that you will be able to use the DVD of recovery for the installation of the OS.

  If possible, test it with some other bootable CD installations. Please post the results.