When I try to copy a file it displays an error message

The message error "unable to copy the parameter is incorrect."
The file is a crack of a game file.
Why is this? and how do I solve this problem?

Hello

1. is the question that is specific to a particular file?

2. is the file on a disk (CD/DVD) or on the hard drive?

3 did you changes to the computer, before the show?

Method 1:

Right-click on the file and select Rename. Now search for the question.

Method 2:

Try to copy the file using the command prompt and check.

a. Click Start, click principally made programs, click Accessories, right-click on command prompt and select run as administrator.

b. type in the following command, and press ENTER.

Copy

http://TechNet.Microsoft.com/en-us/library/bb490886.aspx

Tags: Windows

Similar Questions

  • When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

    original title: could not copy files

    When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

    Hi GloriaZF,

    What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

    You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

    I hope this helps.

  • Windows Explorer crashes when you try to copy a file

    Win xp Pro

    When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

    All solutions short of re - install XP

    Win xp Pro

    When you try to copy a file using windows Explorer, the application crashes. I tried to use select times of right mouse and select menu with the same results.

    All solutions short of re - install XP

    This happens with any file or a particular file?

    Have you tried the copy command from a command prompt window (start > run > cmd > OK)?

    For the full syntax of the copy command, see http://technet.microsoft.com/en-us/library/bb490886.aspx

  • When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

    I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

    Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

    diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

    Once thru, L.click the disk, go to actions, all, select 'enable '.

    In addition, live windows for vista is microsoft discontinud

  • Micro adapter USB keeps disconnecting when I try to copy the files.

     
     
    Micro adapter USB keeps disconnecting when I try to copy the files.

    Hello

    I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

    Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

    Any help will be appreciated, thanks in advance!

    Hello

    1 did you change on your computer?

    2 did you receive an error message?

    I suggest you to check with the other USB port.

    Method 1:

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Method 2:

    I suggest you to remove and reinstall all USB controllers

    To remove and reinstall all USB controllers, follow these steps:

    (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

    (b) click on the Hardware tab.

    (c) click the Device Manager button.

    (d) expand Bus USB controllers.

    (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    (f) restart the computer and reinstall the USB controllers.

    (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  • Robocopy hangs when you try to copy a file which in use

    Hello

    I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

    Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

    Thank you

    Jason.

    "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

    I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

    I read that you have provided the link.  This suggests that there is no solution.

    - - - - - - -

    You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

    1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

    2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

    So I precede this with

    0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

    The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

    If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

    The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

    You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

    I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

    As I say, it may not meet your needs.

  • I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

    I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

    Hello

    Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

    Hope that helps!

    Kind regards

    Sheena

  • When I click on all the files I get an error message says "without this user supported interface.

    When I click on all the files I get an error message says "without this user interface supported 'n I can't open any files or folders.

    A moderator is spent it to search in the Forum, the folders and files Windows of Feedback Forum.

    HI, Luvnmidlife,

    Windows operating system?

    It is the unique user on the system account?

    Create a new account to use for testing purposes.  See if the problem persists using the new account

    Difficulty of a corrupted user profile

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  • When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

    Original title: could not start the Service "Windows Defender" (WINDEFEND)

    When you try to install Windows Defender, I get an error message that

    "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

    How can I check which privileges I have and I need?

    I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

    Help please

    Hello

    This error message is because you have Norton installed on the computer. See the for more information section below.
    http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

    Let's try the steps and check them off below if it helps.

    Step 1: You can try to uninstall Norton and then check if the problem persists.
    Note: Reinstall Norton after verification.
    Reference: http://support.microsoft.com/kb/307895

    Step 2: Change the registry value and check.

    a. Click Start, type regedit.exe and press ENTER.
    b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
    c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
    d. enter 0, under value data, and click on the OK button.
    e. close the registry editor.
    f. restart the computer.

    Registry warning:
    Important
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."

    access denied for the creation of a directory

    When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

    When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

    Only when you try to install this application?

    What about BullZIP PDF Printer?

    (You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)

  • When I try to install my software, I get an error message that "Windows Installer could not be accessed".

    Issue of Windows install

    I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?

    Thank you, Jeanne Vecere

    You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.

    IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.

  • When you try to download adobe acrobat, I get the error message indicating that he met a unexpected faliure

    When you try to download adobe acrobat, I get the error message indicating that he met an unexpected failure. Any suggestions?

    Hello

    Please try to download the software from the URL here download Acrobat products | Standard, Pro | DC, XI, X and let us know how it goes.

    ^ Ani

  • When you try to sihn on AOL I get the error message "missing file snmaster.idx please reinstall.

    can anuone tell me how to reinstall a file called snmaster.idx. Whenever I try to connect to AOL, I get an error message indicating that the file is missing.
    Thank you
    FPV

    Hello

    Visit this help link on AOL:

    You may receive the message "the file snmaster.idx is missing" during the installation of the AOL® software if some data
    the files are not installed in the correct location. Move these files to the correct location, this problem will be solved.
    http://help.channels.AOL.com/KJump.adp?articleid=223420

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • When you try to copy a file 'trust' in Vista, get the message 'Copy as administrator'

    I have a computer with Windows Vista Home Premium (32 bit), in which I am an administrator on the computer. I have a file that is "safe" and requires administrator permission to open. Since I am an administrator, I was able to open the file. But when I tried to cut or copy the file, a message appears that I need administrator permissions to open it! Similarly, some programs that create other files (images, for example) must be open as follows so that you can actually save a picture: right click > run as administrator . If you do not open the program in this way, access is denied when you try to save a picture. But back to my account. Like programs, is it possible that I can 'copy as administrator' or 'cut as administrator'?

    I discovered how to copy and paste files using a single command line. Unfortunately, you can't copy the files, not folders. Here's how to copy a file:

    1. Open command prompt
    2. type "copy" without the "sign, while simple letters
    3. press the SPACEBAR once
    4 type the location of the file you want to copy (for example: C:\Users\default_user\file.txt)
    5. press the space bar once more
    6. type in the destination that you want to copy the file (for example: Folder\destination C:\New folder)
    7. press enter and your file should be copied.

  • Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

    Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

    I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

    Hello

    Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

    This is what happens:

    -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

    Solution:

    -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

    -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

    -Use tabs and the arrows on the keyboard to get to Device Manager

    -Remove all usb drivers, including the one that is connected to the keyboard

    -You may need to force the closure - the dawn of the computer.

    -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

    -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

    -Connect all USB cables

    -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

    - and... Here we are. Bingo!

    Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

    If it worked for you, please press useful Votes.

    Thank you.

    Ntongo

Maybe you are looking for