When I try to create the Word windows password reset disk it wants to place on the readers [E:] or [f], which are locations of card camera

Gateway Sx-2800-01 Vista Edition home premium 64 - bit SP1 4 GB DDR3 ram, 640 GB hd from computer > Panel > user Accts > resetwizard password, it gives options for drive [E:] Compact flash or [F:] which is a multi (sd, ms, xd, etc) Flash drive, if I change [d] with a cd or dvd - r formatted for data I get an error disc X , this disk is not a password reset disk.  I have a Maxtor One Touch 4 mini 160 GB attached with vista drivers that do not work Seagate is not 64-bit capable for maxtor one touch (their excuse is 64-bit is not dominant enough to justify the $$ to set what has happened since 64-bit xp even) NEVER BUY FROM THEM AGAIN! ANY THOUGHTS ON A QUESTION WOULD BE GREAT

[excerpt]
To create a password reset disk, you must be:

a USB flash drive
OR
a floppy drive and a floppy disk

You cannot create a reset disk using CD or DVD media.

[/excerpt]

through the creation of a password reset disk in Microsoft Windows Vista

Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

Tags: Windows

Similar Questions

  • I run pc photoshop CS6 on my windows 7 (mac). I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in my SP6 or 64 PS5.5

    Greetings


    I run Photoshop CS6 on my windows 7 Ultimate (MacPro 2008 via Bootcamp). 12 GB of ram, 512 on the video card. A lot of disk space. None of the questions of knowledge, viruses, malware, etc.


    I have stupidly? the Applications Adobe Manager to update all my Adobe apps. Since that time I now get the following error message when you try to create the Contact Sheet II in any of my SP6 or PS5.5 64-bit or 32-bit versions. «Cold is not complete the plug of command because Photoshop was unable to locate the plugin JavaScript» Re, I installed the latest update, but no change. My installation is built on CS4 extended, then with a version Standard 5, 5.5 and 6 facilities upgrade.


    The Contact Sheet function was working well, until I ran the updates.


    I'm in a bad place, as I am in the middle of multiple projects, everything I need to create Contacts for.  I thank any help or give advice on how to fix this...


    Help, please!

    Try to run Photoshop with the SHIFT key is pressed and skip loading part tird plug-in and try to use the Board contact II.  A version of plug-ins from third parties have been known to break Photoshop Scrippting.

  • Satellite U205-S5034 - error when you try to create the recovery disks

    Hello world

    I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
    An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

    The machine is a Satellite U205-S5034 under XP Pro SP3.

    Any help will be greatly appreciated. Thank you and have a nice day.

    DaveMatt44

    Hello

    What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
    So please try other discs.

    Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

  • Error when you try to create the Contact form PSE13

    I get two error messages when you try to create a contact sheet

    "The operation could not be completed. The file or directory is not found. »

    then

    "Could not complete the command II Board contact because of a program error"

    I'm on iMac OSX Yosemite 10.10.2

    Updated for PSE12 when PSE13 is released

    No problems with PSE12

    If you go to

    (user) Library\Preferences\Adobe\Plugins\Adobe Board Contact II PSE12\Elements

    and remove the

    Adobe Board Contact PSE12 Pref.


    If all goes well, you should be able to use the plugin Contact Sheet II again.

    To view your library, the user in the menu go to the Finder press the Option key, then you should see library listed in the menu to reach.

  • When you try to create the new thread in a discussion forum, the browser closes and I'm back in the office.

    I tried to create a new thread in a Discussion forum.  Closing the browser window and I was back on the desktop.  I did a system restore, which not only does not solve the problem, but deleted my internet security software.  Has worked with people of tendency to reinstall the software, but I get a message tht says: «Unable to extract the installer...» ».  I have a class of the internet this week and I need this computer.  Can someone please?

    You can undo the last restoration of the system using: http://www.vistax64.com/tutorials/76256-system-restore-undo.html.  This may fix your problem with security software that has uninstalled when you did the system restore (using a date that probably existed before the installation of trend).  I don't know if it works now that you have done other things to try to reinstate the program, but it's worth a try.  I sincerely doubt that this process could help with the problem of browser (and there not so undo it reverses your efforts).

    You use Internet Explorer?  If so, please repost your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where the IE specialists will be more than happy to help you with your problem.

    If you are using another brand of browser, please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where experts in programs other than Vista or IE will be more than happy to help you with your problem.  You can also try to go to the web site of the Explorer and contacting their technical support staff (or post on a forum if they support a).

    Only trend can help you with installation problems you encounter through their program.  Perhaps it didn't uninstall completely during the restoration of the system.  Check if the trend has a removal tool and use it to uninstall the program, then try to re - install again.  If this does not work, you will need to work with their technical support to solve the problem.

    I hope this helps.

    Good luck. Lorien - a - MCSE/MCSA/network + / A +.

  • Getting the error "the device reported unexpected or invalid data for a command. (oxC0AA02FF) when you try to create the system repair disc

    original title: error 0xC0AA02FF

    I try to use a "USB" "cruzer" to create a disc repair system, but when I click on this drive to create it I get the following error message:

    "The device reported unexpected or invalid data for a command.  (oxC0AA02FF)

    Hello

    What method did you follow to create the system repair disc?

    I suggest you to create the system with different USB repair disc and check if it helps.

    Means all try the methods and check them off below if it helps.

    Method 1:

    Try to put the computer in a clean boot state, and then check if it helps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    Method 2:

    I also suggest you to perform check disk (chkdsk) on the computer and see if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    Note: You may lose a small amount of data while performing the check disk.

    I also inform you that the data on the USB key will be lost. You should take a backup.

    You can also check with the reference article below:

    http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  • When you try to create the safety PIN or password photo, get the error "the remote procedure call failed."

    Logon to an account on the Win8 Pro system.  In the PC settings. Your account, try to create a PIN.  You will be asked your password, and when I enter the password, the tracking error.  "The remote procedure call failed."

    In the application event log, we see:

    The failing application name: CredentialUIBroker.exe, version: 6.2.9200.16384, time stamp: 0x5010a22d

    The failed module name: nvwgf2umx.dll, version: 9.18.13.1070, time stamp: 0x50b976f6

    Exception code: 0xc000041d

    Offset: 0 x 0000000000135122

    ID of the process failed: 0 x 1160

    Start time of application vulnerabilities: 0x01cddfd4b4a988ef

    The failing application path: C:\Windows\System32\CredentialUIBroker.exe

    Path of the failing module: C:\Windows\System32\nvwgf2umx.dll

    Report ID: fdf0d095-4bc7-11e2-be7a-e0cb4e8a55c5

    Faulting full name of the package:

    ID of the failed package-parent application:

    I did a search of exhaust gases and am not finding that anything related.

    Action taken:

    ran sfc/scannow and no reported problems.

    Need to stop the application to quit.

    I found the problem for the updated NVidia driver.  Once I disabled the display driver USB 3.0 that acts as a method to connect to a computer USB 3.0 (also tactile) monitor, the driver installed correctly and does not interfere with any of the Windows applications.
    Also, try to remove all the accounts on your system that are not user accounts that some applications will add them without apparent reason.  Applications still work correctly.  It's just less sure there to access your system.

  • When you try to create the simple volume, I get "There is not enough available space on the disks to complete this operation." Even when there is obviously a lot of space.

    I just installed Windows 7 Professional in the last hour and was not able to create this partition during the installation.  Now that I'm in disk management.  It's showing I 73,24 GB of free space.  What I'm trying to do in the end, is to combine this with a partition already created.  One thing I find strange is anytime I go into "new simple volume" it tells me that the maximum space in MB is 74997 when the free space on the graph shows me only 73,24 GB.  I tried to create the size of the volume to 73000 MB and have also tried 10000MB and get to every time the same mistake!  "There is not enough available space on the disks to complete this operation."  What can I do to fix this?

    Your best bet is a third party partition manager.

    With the tools of Windows 7, you can only shrink and extend partitions, apart from the creation and deletion of them.

    Disk manufacturers quote their sizes of disc in decimal format. Windows Go are 2 ^ 10 or 1024 decimal MB. Then 74997/1024 is 73,24 GB.

  • When I try to "Optimize the readers", I get "Value is not available" on a SSD

    I am running Windows 8 Pro. I can't optimize my SSD. I read online that I should be able to click on "Optimize" and who would send my SSD TRIM data in order to improve its performance. But currently "Analyze" and "Optimize" buttons are grayed out for my solid state drive. The current state also show "optimization is not available.

    Thanks for any help.

    Same thing here.

    Went to Windows "Optimizing disks", click on optimizing, but he said "Value is not available" and then the button "Optimize" changed in gray.

    When I manually ran the automatic Maintenance (Control Panel > Action Center > maintenance > start maintenance), I noticed a lot of reading and writing for the SSD during the maintenance process.  So I opened 'Optimize the readers' and he has done exactly as she was running the Disk Defragmenter (despite it, grateful that he was a Solid State Drive).  I looked in the resource monitor to see what that wrote for the SSD and I don't remember the exact name of the process, but it was something with defrag in the name.  I had already done Windows Experience Index before that, then Windows knew that an SSD has been installed and it showed as such under 'média Type', so I don't know why it was running a disk defragmentation.

    I just ran the automatic Maintenance again, but this time it doesn't seem to be running defrag as it did the first time I ran it.  But, it continues to display "Value is not available" to optimize disks.

    Then, when he says "Value is not available", which means exactly?  DisableDeleteNotify showing 0 (indicating the PAD is on), but is windows sends always TRIM wants the SSD or not?

  • Windows password reset disk

    Hello

    I have today for the first time tried to create a reset password windows on my USB disk. I inserted the disk on my pc and followed the procedure on the screen, however, told me that there is already a disc. So who created this disk and how? I've never done this before and it's a newly installed pc.

    Here are the exact words.

    There is already a disc to reset password for this user account, creating a new one will make unusable the disc already created.

    Now, I have never create any disk so where it comes from?

    Thank you.

    Maybe someone else did it. What is the reason - it does not matter since the creation of the new disk will make the old disk unusable. Go ahead, create the floppy, then don't forget to test immediately. An untested disc is near useless.
  • When I try to create the new calendar to Google Calendar in Thunderbird, after I connect, I couldn't click allow (or deny button) in the new window

    Why what happened? I searched everywhere online and I get no response...

    Do you accept cookies for accounts.google.com in Thunderbird?
    (Alt - T) Tools - Options - Privacy - Web content
    Create an exception to allow cookies for the domain above.

  • When you try to create an application Windows in DPS In - App purchases wont let me go further

    Hello

    I'm going through the process of trying to create a Windows application using the dps application builder.

    I get through the General and active this part very well, but when I get to the In - App purchase page I am stuck on the default price level. In the example, it shows com.adobe.dps.199

    The app that I produce doesn't have any In - app purchases. And it's already setup of Microsoft with no in-app purchases

    I tried to type in the price level Adobe box but no indication of the present key actually be at my disposal.

    Any ideas?

    Do not put anything in the box in-app purchase, just leave it blank.

    If the Send button lights means you have missed something on one of the pages required earlier. Make sure that there is a green check mark next to each item in the list of the pages on the left. If one of them doesn't have a green check mark means that you forgot a field that is required.

    If I had to guess I got say you forgot to specify the background color for the home screen on the active page. He often drops below the bottom of the screen on the small screens (such as my notebook), and is easy to Miss

    Neil

  • Hi I am using jdev 11g when I try to create the database, I get this type of error massage

    Listener refused the connection with the following error:

    ORA-12505, TNS:listener is not currently of SID given in connect descriptor

    so please can someone solve this problem...


    Hi you can check given SID is correct and chek Lsistner is running on the host

  • Update XP to 7 - when I try to install the Microsoft Office 2007 Suite, which was an upgrade on XP, the installation fails because no previous Ms Office could be found.

    There must be a solution out there, but I couldn't find it.  I need to reinstall Office 2007 Suite but cannot because my upgrade discs are looking for a previous installation and of course can't find it.  The version of MS Office, where I have improved in XP has a physically BROKEN DRIVE!  Now what?

    Contact MS Support & see if you can get a free replacement disc, Fern. Without it, you're sunk. See http://support.microsoft.com/kb/326246 (if the earlier version of Office was preinstalled by the OEM, you need to get the replacement on their part.)

    Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Error 80071 has 30 when you try to install the updates.

    What does it mean error code a 80071, 30 when you try to install the updates

    Hello

    1. are you able to install the updates as soon as possible?

    2 has there been recent changes made on the computer before the show?

    I suggest you to please follow the provided steps and update us with the results.

     

    Method 1: Perform the clean boot and try to install the updates.

    To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

     

    Method 2: Run (CheckSur.exe) system update readiness tool

    Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/947821

    (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Try to install updates again.

    Method 3: How to reset Windows Update components?

    http://support.Microsoft.com/kb/971058

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows.

    Method 4: Scan of the file system (CFS) auditor.

    Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

    See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    You can also check the updates failed.

    a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

    (b) in the left pane, click view update history.

    I hope that helps!

Maybe you are looking for

  • Which reader app is fully downloadable items for offline reading?

    Is there any player decent app for iPad or iPhone which will download all articles so that I can read them offline I have tried many like Feedly, pulse (which became a much worse app after Linkedin them bought), and others I do not remember the name

  • First HP Calculator: syntax error in line 23, first HP program

    Hello all, can not find this error, because I don't see anything wrong, maybe I count the lines wrong, then how count you lines in HP PPL. It's in the manual? Program to check say syntax error in line 23 program.

  • x131e - no charge.

    The port of the charger on my brand new x131e seems to be loose. I can move the card to get the green light to turn on and charge but it is very finnickey. I've seen other models who can be replaced very easily. It's something that I might be able to

  • HP EliteBook 8440p: windows product key 7

    windows 7 recovery using product product key is and the series I can not product Thank you and best regards

  • On a Canon Rebel T1i quick control screen

    The quick control screen comes on when I turn on the camera.  How can I get the LCD screen to show what I am pointing the camera to?  It can be shooting parameters not quick control screen display.