When I try to install service pack 3 I get a message saying "Setup cannot copy the file c:\windows\system32\drivers\mrxdav.sys.

Similar Questions

• Cannot open Device Manager or services.msc a message box pops up it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  Original title: I can't connect to my wireless network. My convenience store does not work and I can't open the network and sharing Center. I'm sure it's some type of virus. Help, please.
  It says "an unexpected error has occurred. The Troubleshooting Wizard can not continue. "When I try to run the troubleshooter.

  When I try to open Device Manager or services.msc a message box appears, it says "MMc cannot open the file C:\Windows\system32\devmgmt.msc.

  He said also my Defender pro subscription has expired, even if I've just recently added a one year subscription.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Try these steps and check if it solves the problem:
  a. click Start, type cmd, right click and select run as administrator.

  b. at the command prompt, type regsvr32 msxml3.dll , and then press ENTER.

  Method 2:
  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  Run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  See the steps in the link and check.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• When I try to install Service pack 2, I get an error "WindowsUpdate_80070570."

  Each update else installed to succeslfully, except for the one that says "Update important" which is be Service pack 2 for x 64 system. I tried to update, and I get this error code "WindowsUpdate_80070570"

  I rebooted my computer, cleared out memory... I would really like to fix this ASAP, I bought a video game that requires I have SP2 installed, please someone help me fix this :(

  Thanks in advance :)

  hobodealer,
  Please post with the information requested here: what to post in the Windows Update forum
  Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

  Run the System Update tool and then try to install SP2.
  Run System File Checker and test it.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 490 error code when you try to install service pack 2 with vista

  I have service pack 1 installed on my computer but I get an error message when you try to install service pack 2

  blztcj,
  Take a look at this article and try the steps inside:
  Troubleshooting Vista Service Pack installation issues

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get error Code 80070002 when I try to install Service Pack 1.

  Vista will not be updated to the Service Pack 1 or 2

  I have Vista and have windows automatically updates.  Of course, it is never updated with the Service Pack 1 or 2, and when I go to Windows updates, it says I have no updates available.  Recently I had trouble with my anti-virus software, and they said it was because my computer has not been updated.  I didn't know that I was not common.   However, I get error Code 80070002 when I try to install Service Pack 1, so SP2 cannot be downloaded until I get this one.  I tried everything I could find as an aid, but they were especially when people had problems years ago, when it came out.  What can I do?

  Hi kimber222,

  If these steps are not successful, the next step is and InPlace upgrade. This process is an alternative to reinstalling the operating system. During the process, some of your custom Windows settings may be lost.

  Run a repair installation will restore your current install of Windows to the version of the installtion CD/DVD. You will have to reinstall all the updates that are not included on the CD/DVD.

  Although this process should not damage files and the applications installed on your computer, it is always safe to make sure that you have a recent backup of your data and how to reinstall all software you have installed.

  Fill out the next step for the InPlace upgrade:

  1. Close all open applications.
  2. Insert the Windows Vista CD/DVD intot he computers CD/DVD drive.
  3. In the windows installation program, click install now.

  Note If Windows does not automatically detect the DVD, follow these steps:

  Click on start and type Drive: \setup.exein the box to start the search.

  Note The placeholder drive is the drive letter of the computer's DVD.

  List programs, click Setup.exe.

  In the settings window, click install now.

  1. click on connect to get the latest updates for installation (recommended).

  2. type the CD key if you are prompted to do so.

  3. Select the operating system in the "Windows Installer" page you want to update or Inplace.

  4. click Yesto accept the Microsoft software license agreement.

  5. on the which type of installation you want? of the screen, click upgrade.

  6. when the installation is complete, restart your computer.

• Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one.

  Since the update to iTunes 12.4.1.6 I don't see my purchased music. When I try to import my old playlists I get a message saying that the library is not a valid iTunes library. Thus, thousands of songs and hundreds of films and I can't see or play one. I see my movie library where it is stored on an external hard drive, but my music was on my iMac.

  Where all the playlists gone and why didn't appear my entire music library? I checked the preferences and iTunes points to the correct folder, BUT only my music purchased appears...

  Same thing happened to me. I tried to replace iTunesLibrary.itl with an older copy, but that has not worked. Then I tried to return a version by resetting the Time Machine's iTunes app, but it would allow me to edit or delete iTunes because it is part of Mac OS X.

  So, I can not sync my iPad or iPhone, update all apps or find my music, that is, the course of the odf, still on my hard drive. ITunes just can't see the library.

  The difficulty of this Apple.

• I am trying to format my PC and when the installer loads of my key USB Kingston, he said: Setup cannot copy the file XPtspCom.inf.

  Setup cannot copy the file XPtsp Com.inf

  Hi all!
  I try to format my PC and what configuration is loading my Kingston USB key, said he: Setup cannot copy the file XPtspCom.inf.

  I use Windows XP Professional Edition SP3.
  How do slove this problem please to continue to work with my PC?
  Thanks in advance!

  You should not use these programs, but if you want a USB key to install then you should make an ISO file and then using Unebootin according to me this is a best software to USB for xp and if you have windows 7 installed in one of your system, then you can use tool usb windows 7.

• Cannot install the update of security KB2698365, get the error message ' set up cannot copy the file msado15.dll.

  Tried several times, if I check the update log it shows canceled, have tried to disable Norton. Tried to install it manually through the Setup Wizard.  He gets up then I get the message "set up cannot copy the file msado15.dll.

  Hello

  You did changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest you register the Msado15.dll file required.

  a. Click Start and then click Run.
  b. in the run dialog box, type the following commands in the Open box and then click OK.

  Regsvr32.exe ">"

  The> placeholder is the absolute path of the file Msado15.dll.

  The following examples show how you can specify an absolute path:

  Regsvr32.exe "C:\Program Files\Fichiers Files\system\ado\Msado15.dll"
  
  If the Msado15.dll file is saved successfully, you receive a message similar to the following message:

  DllRegisterServer in C:\Program Files\Common Files\system\ado\Msado15.dll successful.
  c. click OK.

  Method 3
  I suggest to perform the clean boot and then try to install the updates. Clean boot will disable all of the third-party program to ensure that all third party program is not causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 4
  I would say that you can download and install the update to the clean boot from Microsoft download center.

  Update security for Windows XP (KB2698365)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30228

• Error code 800F0811 when you try to install service pack 2 for vista

  Original title: error code 800F0811 when trying to install service pack 2 for vista tried booting in minimum mode and reset my compents windows update or where he worked?

  When try to install service pack 2 for vista tried clean boot and reset my windows update components or where he worked? This two things were proposed during this same error that happened to a customer trying to download sp1

  Hello

  Review the information in the site mentioned below that can help you work with the question:

  http://support.microsoft.com/kb/947366#resolution3.

• Problems with Service Packs - when you try to install Service Pack 2, it says I have to install SP1. When I try to install SP1, it says that I have already.

  My automatic update did not work, so I went to the site to try to download Service Pack 2, one seemed to have trouble with my computer. After I downloaded it, I tried to run, but he said I had to download Service Pack 1. So I did it. When I try to run this file, it says I have already installed Service Pack 1. So I tried to restart the Service Pack 2, but she is always claiming that I need Service Pack 1. I don't know what I'm supposed to do. Can anyone help? I'd be happy.

  Hi mistyrayns

  
  You can check if the below steps help-
  Step 1:
  I suggest you to check if you have information that service pack 1 is present on the computer. You can click Start and run. Then type msinfo32 and press ENTER. Check if Service pack 1 is present in the information provided.

  Step 2:

  If you have service pack 1 installed, and mentioned in the information from the computer, then I suggest you refer to the article below and uninstall service pack 1 computer.

  http://support.Microsoft.com/kb/948537

   

  Step 3:
  After successful uninstallation of SP1, try to install both service pack 1 and 2. Check if the issue is resolved.

  I hope this helps.

• 80070057 error code when you try to install Service Pack 1

  I try to install Vista Service Pack 1 and when I try to install it either online or manually by downloading the entire 400 + M file, it will start and show 10 minutes later the installation failed with code 80070057 error and.  I can't find this code on a Microsoft Web site reference.  Any idea what's going on?

  Thank you

  A long shot, but try it (even if it's for Windows Server 2008). Stop mentioned serivce and run Service Pack 1 Setup.

• Error code 8024200d when you try to install service pack 2 on vista 32-bit

  SP2 and run system update tool update always fails.

  Hello

  **********************************************
  Rename the folder Catroot2 rename the Catroot2 folder (Windows XP and Windows Server 2003 only) and then try to install the program again.

  Note Skip this method if the operating system is Windows 2000.

  To rename the Catroot2 folder, follow these steps:

  1. Click Start , click run , type cmd, and then click OK .
  2. At the command prompt, type the following commands and press ENTER after each line:
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  3. Remove all tmp*.cat to the following folder:
     % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

     If any of the files that begin with tmp exist in this folder, do not remove any other files. Files .cat in this folder are necessary for installing hotfixes and service packs.

  Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.
  ***********************************************
  Reregister DLL files that are associated with Cryptographic Services for files .dll registry that are associated with Cryptographic Services, follow these steps:

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 /u softpub.dll
     regsvr32 /u wintrust.dll
     regsvr32 /u initpki.dll
     regsvr32 /u dssenh.dll
     regsvr32 /u rsaenh.dll
     regsvr32 /u gpkcsp.dll
     regsvr32 /u sccbase.dll
     regsvr32 /u slbcsp.dll
     regsvr32 /u mssip32.dll
     regsvr32 /u cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  3. Restart your computer.
  4. Click Start , click run , type cmd in the Open box, and then click OK .
  5. At the command prompt, type the following commands and press ENTER after each command:
     regsvr32 softpub.dll
     regsvr32 wintrust.dll
     regsvr32 initpki.dll
     regsvr32 dssenh.dll
     regsvr32 rsaenh.dll
     regsvr32 gpkcsp.dll
     regsvr32 sccbase.dll
     regsvr32 slbcsp.dll
     regsvr32 mssip32.dll
     regsvr32 cryptdlg.dll
     output

     Note If you are prompted, click OK .

     Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.
     Restart the computer.

  ***********************************************
  Remove the hidden %windir%\System32 and its subfolders attribute

  1. Click Start , click run , type cmd in the Open box, and then OK .

     Note On a Windows Vista-based computer, click Start, type cmd in the Search box and right-click on cmd.exe , and then click run as administrator .

  2. At the command prompt, type the following commands, pressing ENTER after each line:
     attrib s h % windir %
     attrib s h %windir%\system32
     attrib s h %windir%\system32\catroot2
     output

  ***********************************************
  Clear the temporary file and restart the hotfix installation or the installation of the service pack Note Skip this method if the operating system is Windows 2000.

  To clear the temporary file and restart the hotfix installation or the service pack installation, follow these steps:

  1. Remove all tmp*.cat of the following folders:

     systemroot \system32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}

     systemroot \system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}

  2. Delete all the kb*.cat files in the following folders:
     % systemroot%\System32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
     % systemroot%\System32\CatRoot\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}
  3. Remove all the oem *. * files in the % systemroot % \inf folder.
  4. At the command prompt, type the following commands. Press ENTER after each command.
     net stop cryptsvc
     Ren %systemroot%\System32\Catroot2 oldcatroot2
     net start cryptsvc
     output
  5. Restart the installation of the patch failed or the installation of the service pack.

  ***********************************************
  Empty the software distribution folder

  1. Click Start , click run , type services.msc and click OK .

     Note On a Windows Vista-based computer, click Start, type services.msc in the Search box, click services.msc and then click run as administrator .

  2. In the Services (Local) pane, click automatic updates , and then click stop .
  3. Reduce the Services (local) window.
  4. Select all the contents of the Windows distribution folder, and then delete them.

     Note By default, the Windows distribution folder is located in the drive: \Windows\SoftwareDistribution folder. In this place, the drive is a placeholder for the drive where Windows is installed.

  5. Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6. In the Services (Local) pane, click automatic updates , and then click Start .
  7. Restart the computer, and then run Windows Update again.

  ***********************************************

  It may be useful

• Why do I get 800736B 3 error code when you try to install service pack 1 through windows update in windows 7 64 bit?

  When windows update tries to install service pack 1, it fails with the error code 800736B 3. I am running Windows 7 professional 64-bit.

  I searched around these forums and others to find a solution and I'm afraid I'll have to re - install windows.

  So far I have tried:

  1. installation of the fix/update - Windows6 analysis tool. 1-KB947821-v10 - x 64

  2. I ran sfc/scannow in the administrator command prompt

  3 run the windows update utility for troubleshooting to solve all the problems

  4 remove all content from the C:\Windows\SoftwareDistribution; When I delete these files it redownloads the update, but on installation, you get about 65% of the way through and fails.

  5 disabled and re-enabled BITS

  6 downloaded the stand-alone manual update, installation failed the part of the way by

  Here is the reading for the Checksur.log

  =================================
  Preparation of control system was updated.
  Binary version 6.1.7601.21645
  Package Version 11.0
  2011-03-29 20:20

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store
  (f) CSI identity missing 0 x 00000000 wnetvsc.inf_31bf3856ad364e35_6.1.7600.16385_b3131d70e92cd346 appid
  (f) CSI identity missing 0 x 00000000 ws3cap.inf_31bf3856ad364e35_6.1.7600.16385_f2bcdebb5e0570d7 appid
  (f) CSI identity missing 0 x 00000000 wstorflt.inf_31bf3856ad364e35_6.1.7600.16385_1c88e04231fe3719 appid

  Summary:
  Seconds executed: 419
  Found 3 errors
  CSI identity lack Total count: 3
  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Do a repair of Windows 7 installation and then install SP1.

  Windows 7 - repair facility
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• Windows 2k8R2 - receiving error when you connect (MMC cannot open the file: C:\Windows\system32\ServerManager.msc)

  Windows 2008 R2 - I just started getting this when I connect, and also when I try to manage the machine:

  MMC cannot open the file:

  C:\Windows\system32\ServerManager.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. This may also be because you don't have sufficient access to the file.

  It always worked before and work for other users simply not me on this particular area. It is a production company, and I need a quick resolution please. Thanks in advance.

  PM

  Hello

  Your Windows is better suited for the public of Windows Server on TechNet. Please post your question in the TechNet Windows server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

• I get error code@80073aa2 when I try to install service pack 2. all the so certificate errors when I try to down load any anti-virus program

  error 80073aa2

  If there is no anti-virus installed on your computer, it is likely infected. You need to clean it up before you can install an antivirus and certainly you don't want to try to install a Service Pack on an infected computer.

  You need to clean it up first.
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop. MS - MVP - Elephant Boy computers - don't panic!