When I try to play a CD or DVD, the door opens and I get a message "insert a support and try.

When I try to play a CD or DVD, the door opens and I get a message "insert a support and try. But the anti-virus scan of the device and report No. ERROR. Only play is not possible

When I try to play a CD or DVD, the door opens and I get a message "the drive is empty. Insert media and try. " But many programs, such as antivirus programs analyzing the device and NO ERROR report. It is not possible to play alone.  No player of media, including Windows Media Player 11 or Windows Explorer does not recognize the presence of the media. I tried with many CD and DVD that plays normally on other computers with similar OS and also on DVD players.

My computer has Windows Vista Home premium with Service Pack 2.

Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

Hello

Click right tab taskbar - task - process - make sure WMPlayer.exe Manager, nor any other
the player is responsible - in the affirmative PROCESS END on them and try again.

-----------------------

You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.

Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

CD have a tolerance + - and your must read on the edge outside these tolerances of discs.
They may be delivered, but it is generally more economical to replace the disk. Can burn you
a mastered CD and a DVD mastered on this computer and laptop and other computer
machines? Can you do the same on the laptop and play in this machine?

Several good info here:
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

===========================================

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

Maybe you are looking for