When I try to play a song on mediaplayer it pause and when you press play there is no sound

Similar Questions

• my player windows media apart when I try to play the video the sound works but there is no picture just a black screen and all my music files are there and play very well sound just video that gives trouble?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: my Media Player does not work when I play video all I get is the sound, the screen is just black hear any picturedoesn can't if it's a DVD or a download on the internet its just sound and a black screen?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
  
  1. have you made changes on the computer recently?
  
  Method 1.
  Change hardware acceleration
  You can try to change the hardware acceleration in the middle and check (you can try another level too.)
  a. right click on a space empty on the desktop.
  b. go to the resolution of the screen.
  c. click Advanced settings, and then click the "troubleshooting."
  d. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
   
   
  Method 2.
  a. you can also check that Windows is up-to-date to check updates for your hardware.
  You can also run the difficulty below that diagnoses and identify codecs that can cause windows to become unstable or stop responding.
  http://support.Microsoft.com/GP/video_freezes_or_crashes
   
  b. if the problem persists, you can check the latest video card driver provided by the manufacturer of the PC that is compatible with Windows Vista is installed.
  You can also check out the article below which explains to update hardware drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
   

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Audio jack play and pause/stop when you press the various buttons

  Hi all

  I do a simple radio interface and I have 6 buttons which I want to have that specific preset song playing of the button located in the library screening and stop/pause the current song when you press any preset button.

  I tried to use the attachSound, with associated identifiers but don't know if it's the right way to go. He plays songs, but does not stop their...

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
  
  PlayFM1_1 = new Sound (this);
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
  
  }
  }

  
  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
  
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
  
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
  
  }
  }

  then I tried just to put each piece in its own clip and using this code, but it still doesn't stop/pause the song.

  Stop();

  {mc_preset1.onRelease = Function ()}
  mc_song1. Play();
  mc_song2. Stop();
  }

  
  {mc_preset2.onRelease = Function ()}
  mc_song2. Play();
  mc_song1. Stop (1);
  }

  Does anyone have any suggestions? Any help would be great! Thank you!!!

  Basically, I just need to know how to do the supported mc or button to STOP / to PAUSE the song that plays

  Thank you!!!

  -PAt

  the sound class has no property of break.  It has a stop() method, you must use:

  {mc_FM1preset1.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset1
  FM1value = 1
         
  PlayFM1_1 = new Sound (this);

  
  PlayFM1_1.attachSound (FM1preset1_song);
  PlayFM1_1.start (0, 1);
         
  PlayFM1_6.stop ();
  PlayFM1_5.stop ();  etc.
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_2.pause;
         
  }
  }

  }
  {mc_FM1preset2.onRelease = Function ()}
  {if(!this.) Toggle)}
  this.gotoAndStop ("release");
  radio_FM1. Text = FM1preset2
  FM1value = 2
         
  PlayFM1_2 = new Sound (this);
  PlayFM1_2.attachSound (FM1preset2_song);
  PlayFM1_2.start (0, 1);
         
  PlayFM1_6.pause;
  PlayFM1_5.pause;
  PlayFM1_4.pause;
  PlayFM1_3.pause;
  PlayFM1_1.unload;
         
  }
  }

• How can I make windows play a sound when you press the SHIFT key

  My keyboard doesn't have a light to indicate when it is capitalized. He used to play a sound, but it is more the fact after that I said not to do. However, when entering passwords that are case sensitive, it gives the wrong password. Can someone tell me how to re - turn on the sound.
  Its a Logitech MK320 wireless

  Look in Control Panel > accessibility, and then click "make the keyboard easier to use." Check the box "turn ToggleKeys. This will produce a note when you press the lock keys. Or just check the other box beneath it. In this way, you can turn the tone on or off without having to return to these settings.

  SC Tom

• Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

  Clings in the key on the keyboard? Wired or wireless keyboard?

  Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• When you press the new tab, how can I get the homepage instead of the history of tiles?

  When you press the new tab, how can I get the homepage instead of the history of tiles?

  You can try this.

  • https://support.Mozilla.org/en-us/KB/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off

  Instead of the parameter mentioned pref in about: blank, you can enter any site of your choice.

  Ex: encrypted.google.com

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• No Satellite A200-27R no response when you press power button / stop

  Hello

  Ive looked all over the internet and has spent weeks trying to understand the problem, but im at a loss.
  I recently replaced a cracked screen on my A200-27R and everything worked fine.

  A few days later, I started the new laptop and nothing has happened and has been the same since.
  The electric blue and the battery turns on but does not respond when you press the power button, not even the fan.

  I checked all the connections inside several times, checked without the battery, etc.
  I'm not sure what to try next, any ideas?

  Thank you

  Can you start cell phone if the battery is removed, with AC power only?

  You know, it's not easy to say what can be the problem.

• PowerEdge T410 won't do anything when you press the power button / stop.

  My work has recently retired this t410 server. It worked without any problems when he was arrested. I had to remove and destroy the hard drives from the system. After that, I was allowed to bring home for my own use. I installed a new sata drive and plugged into the power supply and a free sata port on the motherboard. I get nothing when I tried to boot the system. This version has the unique power. Power light only lights up when you press the test button. System fan is going at full speed, but stops when you release the power button. Also on the control panel lights 1,2 and 4 and HDD power on and turn until the test button is released. There is a single green light lit on the motherboard, while it is plugged. Apart from that, I have no response when you press the main power button. Can anyone tell how to try to get it up and running again.

  -Who-

  I have not received the answers more so I think that this issue is ignored. So I'll let everyone know what finally happened. I solved my problem after a lot of electrical testing. I found a diagram of the arrangement of the power dell power supply pins and I made myself the best possible meter test. After several rounds of tests, I found several pins that did not have the right voltage. I bought a new power supply. I installed and replace everything. I plugged into the system and it auto fed on itself. I loaded from an OS and it works perfectly.

  Problem solved

• My left shift key beeps twice when you press on--NOT STICKY KEYS

  My left shift key does not work. The law works fine. When you press it, it sounds twice. Has Ive restore my computer to an earlier point and that did not fix the problem, any more than to disable and turn off StickyKeys. The key itself is sensitive, it leads me to believe that it cannot be the entire keyboard. Any ideas would be useful.

  BTW, I am running Windows 7 on a laptop Asus U43F

  1. See manual ASUS [service] to see if there is any special significance to it. http://www.computerhope.com/jargon/p/post.htm I thought, but it seems not applicable since it is not starting, it is when running.
  2. check the sticky keys for accessibility-related technologies starting with F1 for help. There are a number of them. start going through one by one to see if something is on. You may have accidentally market something (there are combinations of keys that do this). Control Panel, display small icons, accessibility.
  3. buy a $5 or $22 USB keyboard. IBM makes a mechanical keyboard nice $79, classic, I believe to be a joy to type on (they make them for IBM). http://www.pckeyboard.com/page/category/UKBD
  4. Plug it in
  5. Try the left SHIFT key
  6. If she still double beeps {is your installation of windows or something in the laptop, not your keyboard. you can try reinstalling windows using a repair, which is less expensive, you need to reinstall your programs and drivers, but you keep your data. you can keep this configuration, my mother a.} otherwise, {hardware of the laptop may be in need of repair could cost between $200 (replace keyboard)-800 $ (motherboard).}

  There are more expensive mechanical keyboards, but they are for games.

• Colors were reversed when you press Ctrl + Maj + 11

  original title: Please HELP! Graphics card problem... CTRL + SHIFT + F11:------.

  Help, please! im running windows 7 ultimate, I have a hp pavillion centre office. support, and a very powerful graphics card. I pressed Ctrl + Shift + f11 and reversed my colors by accident (another program used same hotkeys) and my graphics card is now totally messed up. I did not buy this computer and hope that there is a way to get back to normal. ALL STRONGLY FREQUENTED HELP!  Right now my computer display looks like one since the beginning of the 1990s, that the color is not actually reversed, but I discovered that this is what happens when you press Ctrl + Shift + f11

   

  Hello

  For me, command + SHIFT + F11 does nothing with the graphics.

  However even if I'm on Internet Explorer Ctrl + Maj + F11 takes me in Kiosk mode.

  Try the following and see if that helps.

  Method 1: It could happen if the theme is replaced with the base.

  Change the Aero theme and see if that helps.

  (a) right click on desktop, click Customize.

  (b) choose one of the themes, Aero themes

   

  Method 2: The graphics card uninstall and reinstall drivers and see if that helps.

  See the following steps:

   

  (a) click Start, right click on computer.

  (b) click on properties, click on Device Manager

  (c) expand the graphics card, right click on the adapter option

  (d) click on uninstall

  (e) now go to your computer / site Web of the manufacturer of the device, download the updated drivers and install them.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Alienware 15 'K' key crashes when you press any of the line

  Howdy,

  I have a little problem with my new laptop Alienware 15. Two weeks after getting it, I noticed that the key K tends to get stuck when you press any of the line. Basically, it remains in the pressed position and not coming back to the top unless I force it by inserting something like a needle under it.

  In the limited time, I used the laptop I have not stressed that special touch at all (just looked on the key combinations of the games that I've played so far and the K key was not used).

  Advice on what to do? I was thinking to get one of these cans of compressed air and blow air under the key and see if that solves nothing. A little scared to take a screwdriver and remove since who knows what I'm going to spoil. I would not have to send the laptop back just because one key is stuck and I hope it doesn't come to that.

  Thanks for any help.

  compressed air is a good choice, you can use a clean brush also (in my case I use both to clean my knees)

• Go to the new line when you press shift + enter in the text box

  Hi, I would like to know how to go on a new line in a text box when you press a combination of keys SHIFT + ENTER. (Pressing himself enter causes the text to be erased and expelled for an ObservableList). Here is what I tried:
  

   text.setOnKeyReleased(new EventHandler<KeyEvent>() {
          final KeyCombination comb1 = new KeyCodeCombination(KeyCode.ENTER, KeyCombination.SHIFT_DOWN);
          final KeyCombination comb2 = new KeyCodeCombination(KeyCode.ENTER);
  
           public void handle(KeyEvent t) {
                  if (comb2.match(t) && !comb1.match(t)) {
                          obs.addAll(text.getText());
                          text.clear();
          }
      }
  }); 

  I'm not aware of any explicit function which allows the accent circumflex positions itself a new line.

  Hello. Please, try the following:

         final TextArea ta = new TextArea();
         ta.addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler() {
  
              public void handle(KeyEvent event) {
                  if (event.isShiftDown() & (event.getCode() == KeyCode.ENTER)) {
  
                          ta.setText(ta.getText() + "\n");
                          ta.end();
  
                      }
                  else event.consume(); 
  
              }
          });
  

• I do my record when you press the Intro?

  good for everyone, hope esten very well
  I have the following query:
  
  If I have two buttons 1 - recording and 2 - Cancel and a text field and I need to package the button Save with the Enter key, because I programmed or doing my record when you press the Intro?
  
  
  and without the cursor changing my single text field.
  
  If I have the button p22_Grabar
  as Javascript Programming serious, while the Intro key works like the truth is not to program in JavaScript...
  
  
  
  
  I appreciate your attention...
  
  REYNEL sarmouk...

  Hello

  I think the best thing to do is to try a simple Apex page in your application.

  Create a new HTML page in your application.

  When the page is created, create a new HTML box on the page.

  Then, create a new 'text element (always submits the page when you press enter)' point in this region.

  Then, create a branch on the page in the same way as before but to get to this new page.

  Now run the new page. Nothing to indicate to the text element and press ENTER. What is going on? The page is refreshed with your text still on the agenda?

  Andy

• Turn off the text field (always submits page when you press enter)

  I have an area which allows you to enter search criteria. There are two fields and a button. The 1st field is a selection list that gives a list of columns in a database that can be searched on. The 2nd field is where the user enters the value to search for. The user can submit the search in 2 ways. They can press the button or press return when the cursor is in the 2nd item that is a text field (always submits page when you press enter). The results are then displayed in a region of report below.
  
  The problem I have, is that if the request is for > 10 seconds and the user gets impatient and hits the Enter key or the button search again the query is returned for a second time (or third or fourth according to the impatience of the user) causing the claim on the basis of data with a negative impact on the performance of the system.
  
  I know how to handle the search key. On a click event on I turn off the button so that the user cannot click on it again and resubmit the request.
  
  My question is - how can I turn off "always provides a page when you press enter" text item when the user presses enter? I tried an onclick event, but disabled the front element I could type in anything. Onblur event does not seem to do anything.
  
  Any ideas would be very appreciated.
  
  Andy

  Hello

  First of all, one thing to try: attributes of the Page, there is a section for the presentation in double - try setting this option on no.

  Otherwise, using the text field type, adds the following to the INPUT tag:

  onkeypress="return submitEnter(this,event)"
  

  which means, you can call your own function of javascript on the onkeypress event, the final line would be call submitEnter(). But you can set the value of a hidden page element:

  function doEnter(t, e)
  {
   if ($x('P1_SEARCH_RUNNING').value == 0)
   {
    $x('P1_SEARCH_RUNNING').value = 1;
    return submitEnter(t, e);
   }
   else
   {
    return false;
   }
  }
  

  Then, after changing your element to an element of normal text on the attributes of HTML form elements, add in:

  onkeypress="return doEnter(this,event)"
  

  Andy