When I try to play anything seconary, it works the sermon film, vidio for awhile and stop for 20 and then play again a moment.

Similar Questions

• I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  No one can tell you anything without the info adequate system or other technical details, including the exact error message.

  Mylenium

• How can I reload Windows Media Player? I get a script error when you try to play anything

  Suddenly the Windows media player gives me a server error when I try to play anything on this subject.  It worked fine last week.

  I have the same problem as Ronald with the same results. Media Player doesn't "start" or start when I select it.

• Re: Satellite L350 - screen goes black when I try to play

  I have a laptop Toshiba L350 Sat. Its currently running on Windows Vista. Caused by a virus, I recently had to reinstall Windows. The laptop is now free from virus.

  My problem is that when I try to play some games that I have the screen goes black and I have to do a forced restart using the power button. There are no other noise running in the background, and Ctrl alt del does not work either.

  Is or has anyone else suffered from this problem and if so how they remedy? I'll try to re-installthe drivers when I get home this morning, but I can't think of anything that could be the cause of the problem...

  Any help would be appreciated

  Hello

  Which disc you used to reinstall Windows?

  Normally, if you use the all Toshiba Recovery disk should work fine after that. These parameters are pre-tested by Toshiba.

  In addition, you can try to clean your laptop using a jet of compressed air. This could blow the dust of fans cooling and, therefore, it of not necessary to disassemble the laptop.

• run-time error when you try to play new worlds of star trek

  When I try to play new worlds of star trek, I get a runtime error and the game ends.  I tried to put the game as if it was on windows 95, but when I try to play the game then he ask for me to use the original cd, but the original cd is in the cd tray already.  I tried to locate the support of the game website, but I guess that since the game is kind of old they do not support for it more.  Right now I am running the beta of windows 7, but I don't know if it perhaps is the problem or not.  I also searched areas of windows tech support anything on errors, but nothing shows up on my type of runtime error.

  frankster195,
  The game worked on this computer under another operating system?  If you have a Core duo, it may not work on it.  Also try different compatibility modes, not only of Windows 95.  Try all of them - I have heard that some people got to work in NT 4.0 or Windows 2000 mode.  Try searching the Internet using the exact phrase that you put in your header post - you'll find forums for players who might have solutions for you.  Let us know if this helped, or if you still need help.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Always get a sign on screen when you try to play the video from Netflix in Windows Media Center

  When I try to play a video on netflix by MediaCenter, he shoots me a sign on the screen and then usually I want to type anything on the subject.  I already have my information saved, but this still happens and I can't watch anything on the MediaCenter.  Anyone know why this is happening?

  Hello

  I suggest you follow the link control.

  I also suggest you to contact Netflix support to get help on the issue.

  Limits of support for Netflix in Windows Vista Media Center

  http://support.Microsoft.com/kb/972151

• nothing happens when I try to play a dvd

  I have a refurbished HP Pavilion Entertainment PC, dv6448se, with Windows 7 above. I just want to play a DVD, but the computer has no effect when the dvd

  is inserted in the drive. The quick game on the computer nothing buttons do. It says I have Windows Media Center/player, but I'm not, and it doesn't show up when I try to play a dvd. Its not listed in the AutoPlay options either. What should I do?

  I have a refurbished HP Pavilion Entertainment PC, dv6448se, with Windows 7 above. I just want to play a DVD, but the computer has no effect when the dvd

  is inserted in the drive. The quick game on the computer nothing buttons do. It says I have Windows Media Center/player, but I'm not, and it doesn't show up when I try to play a dvd. Its not listed in the AutoPlay options either. What should I do?

  =========================================
  If you happen be running Windows 7 Starter Edition or Basic...
  a DVD decoder is not included.

  As you can see in the following article... MS recommends
  upgrade to Windows 7 Home Premium, Ultimate or business.

  Info about DVD decoders: Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  And... maybe the following articles provide some ideas:

  Windows 7 - read a CD or a DVD in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player

  Windows 7 - compare editions of Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/products/compare

  Still no luck?

  One of the following freeware media readers can
  be worth a try... they'll play anything.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (the name of the file to download is: vlc - 2.0.3 - win32.exe)

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Media Player Classic Home Cinema
  http://www.videohelp.com/tools/Media-Player-Classic-home-cinema
  (works on XP/Vista/7)  (The name of the file to download is:)
  "mplayerc_homecinema.1.6.3.5818.x86.exe")
  (start with left click - Download (direct link)

  Good luck...

• Windows media player is lagging after reactivation when I try to play HD videos!

  When I wake up my pc in mode 'sleep' and trying to open HD (h.264 or whatever he calls mov) video my computer freezes, shifts and so on WMP12 starts with the high CPU usage no video or anything that could be done... just unusable... my mouse lag... can restart only! After I restarted my laptop my hd videos play fine, but as soon as I put my pc on wake and mode 'sleep' to the top of my habit of hd videos more play.

  Windows 7 Home Premium 64-bit.

  I tried sfc/scannow 'he says Windows did not find any breach of integrity resources .

  Hi dennyy77,
   
  Welcome to the Microsoft Answers community.
  a. Since when are you facing this problem?
   
   
  I suggest you to update the video driver and check if the problem persists.
   
  Steps to update the driver:
  1. click on the Start button.
  2. in the search box type devmgmt.msc, and then press ENTER.
  3. Select the audio device and right click on it
  4. now, select Properties.
  5. in the Properties window, on the driver tab, click Update driver.
  6. After installing the updates, restart the computer.
   
  For more information visit http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
   
  Try the methods below and let me know if this helped.
   
  Method 1: Set the hard drive to stop a minute or 2 before sleep.

  1. click on the Start button and select Control Panel.
  2. click the Power Options icon.
  3. click on the link Edit plan settings under your power plan. (See screenshot below)
  

  4. click on change advanced power settings. (See screenshot below)
  
  5. click on change settings that are currently unavailable.
  NOTE: This will allow power options that are grayed out to work now and not be gray.
   
  6. now click on the button "+" next to the hard drive.
  Now set the time if that hard drive goes to sleep 1 or 2 minutes before going to sleep.
   
  Method 2: Perform the clean boot your computer.
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
   
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.
   
  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
   http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode
   
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• There is no sound when I try to play the songs of desktop PCs.

  There is no sound when I try to play the songs in my library or radio.  The speakers are very well because I can play from iTunes radio on the internet and local music. I've deleted and reinstalled iTunes, restarted my computer and I know that the sound is turned on. Curiously, it seems that the song moving forward and does not in fact (the blue line streaming lights up blue when I select a song or an advance to the next song.

  See the replies in this thread:

  iTunes no sound

• When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

  When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

  Hello bdoolen, please try to reset firefox and see if that can solve the problem...

• Satellite Pro L - error message when I try to play a music CD

  When I try to play a music CD I get this error message >

  + "The version of this file is not comparable with the version of Windows you are using. Check +.
  + system information from your computer to see if you need a x 86 (32 bit) or x 64 (64 bit) +.
  (+ version of the program and then contact the software publisher.) » +

  He plays on my old XP 32 bit office but will not play on computer laptop 64 bit Windows 7.
  The CD is not a commercial manufacturing, but it is important for me.

  Any ideas please?

  Pete

  Hey,.

  Try your hand at playing the CD with Windows Media Player or player exactly?

  You can try to play with VLC media player. It s my favorite player because he plays all audio and video files and it s freeware :)

• Loud noise clicking noise when you try to play a DVD

  HP Pavilion d4995t desktop PC with High Definition Realteck Audio Ultimate.  Vista Premium o/s.  I play my sound through my HDMI cable to the speakers in my monitor. When I try to play a DVD in the DVD player, I get a loud clicking with no sound from the DVD.   This only happens to the DVD.  CDs play sounds without problem.  If I copy the same files to DVD on the hard drive, I can play from the hard drive and the sound works.  If I connect speakers to the audio output and disable the HDMI output, I can play the DVD in the DVD player and games sound through the speakers without noise.  I ran his tool from Microsoft without success.  Updated all the audio drivers.  I reloaded Vista, which corrected the problem.  But as time passed the problem comes back.  I suspect that the problem was caused by a Microsoft Update. Someone at - it suggestions?

  Hello

  Yes, sometimes after installing the Service Pack for Vista through Windows Update.

  Click on start-> "Control Panel-> sounds-> reading-> select Realtek HDMI Output, click Properties. Click on the Advanced tab above,

• Satellite L655-178 - black screen when you try to play games

  Hello

  When I try to play games e.g. need for the pursuit of speed appears a black screen, I do not understand why. I have Intel Core i3 HD and I can not play games on my laptop.

  I expect an answer please

  Hi p0wer.

  I checked the specifications of your laptop on the Web from Toshiba site and it has the Intel Graphics Media Accelerator HD graphics card.

  As you know he s not the one that is suitable for the games.

  Did you check if the card is supported in your games and is it powerful enough?

• My 5s makes a static noise when I try to play sounds?

  A few days earlier, I connected my phone to the Bluetooth speaker and used for a bit. I unplugged it properly, but my phone was not the same since.

  Every once in a while, when I try to play a sound, it makes a static noise in playback of the sound. Or sometimes it makes no noise at all.

  If anyone can understand what is happening?

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the call logo comes back again? You won't lose data, but it can cure a few glitches.

  Implementation in the new device would be the next step after that:

  Use iTunes to restore your device to factory settings - Support Apple iOS

• Pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  Hi, I have a problem with my pitch bend wheel on my pc - 300 midi keyboard Roland. The Modulation part works but when I try to pitch bend a note using the same logic of wheel just plays a continuous note. Can someone give me some advice please? Thank you

  It's a delicate issue... like some patches cannot stipulate pitchbend...

  But to quickly test your pitchbend wheel actually works properly...

  Download the free lunch monitor...

  Snoize: MIDI Monitor

  Run and see if it sees pitchbend data sent by your keyboard... and therefore by logic.