When I try to reinstall Windows I get an error that I need a driver for continue instalation.

Similar Questions

• When you try to import photos, I get an error that says that the preview is not available for this file.

  When you try to import photos I get an error that says: Preview is not available for this file. Then when I try to download these files, a gray box returns for each photo with the name of the file, and this error message -Preview is not available for this file but no picture. The files are JPEG files. I use Lightroom CC help?

  Some additional information. I received these photos of my granddaughter of my son with Dropbox. I checked the files under properties and found that they were listed as "some blocked properties" so I checked the box to 'unlock' and click on apply. The blocked message went away. Then, I took the original photos out of the folder of file they were in. I went back to LR and made sure those grey boxes with the Preview is not available for this file was missing. Then I went to the new files with the status of unlock in a new folder and tried to import into LR... same thing happens again! UGH

  Hi rsobieski,

  Could you please copy the images of Dropbox in a new folder on the computer/pictures folder.

  Also, then try again to import images into Lightroom and also please check if you have read and write permissions on the images.

  Kind regards

  Tanuj

• When I try to reinstall Windows XP I have this message: "the version you are trying to install is older version.

  Cannot install xp

  everytime I try to reinstall windows xp pro, I get "version that you are trying to install is older version.

  E-mail address is removed from the privacy *.

  How to do a clean install of Windows XP

  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm
  also: http://www.bootdisk.com/

  Also, make sure you have the drivers you need for your mother, video card
  card, sound card, etc.
  Try Belarc Advisor: http://www.belarc.com/free_download.html
  He did a good job of providing a wealth of information, including key software codes
  and you will need drivers for devices.

  If you perform a clean installation on an existing PC which has XP already installed:
  Check your code CD Key corresponds to what Belarc Advisor reports to your existing installation.
  Note: Windows OEM installs usually come with a sticker on the PC or laptop and may not match the installed key factory.
   
  Note: A number of vendors now supply restore CD or a restore hard disk partition
  and, usually, do not provide a Windows XP CD.

  J W Stuart: http://www.pagestart.com

• When I try to update windows I get this error «Windows Update error 80072efe»

  Hello

  I installed 2 days ago to my new PC windows 7. After the installation is complete, I tried to update windows for the first time and every time I get this error: «Windows Update error 80072efe» I google the error and I saw that a lot of people have the same problem. Most of them had their infected PC but mine is brand new and I don't know what to do.

  Hello
   
   
  I found some articles that should help you solve thi sissue.
  Try the methods listed in the articles below and check.
  
  1 Windows Update error 80072efe or 80072f76
  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efe-or-80072f76
  
  2. you may experience temporary errors related to connection when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to activate Windows, I get a message that I have exceeded the number of times that I can activate my OS.

  Reactivation of my professional Windows

  I have a professional windows. I installed it on my Mac and I uninstalled it. But of course I have registered more than once in that it is the machine, but I uninstalled. But now I have an office and I want to use windows profesional in it. Now, when I tried to activate it, it said I crossed my activation limit. Not use it in any other machine. And if we use it in any other machine that I need to disable and want to turn it on in my office.

  Please give me a solution for this.

  Thanks in advance

  If it's a full license or upgrade of detail - you can move it to another computer as long as it is installed on one computer at a time (and if it's a version upgrade Windows the new computer must have its own license of qualification).

  Have you tried using the activation of the phone and talk to someone?

  To contact a Microsoft customer service representative to activate Windows by phone, follow these steps:

  1. Click Start, point to programs, point to Accessories, point to System Toolsand then click Activate Windows.
     Or, click on the Activation of Windows icon in the notification area.
  2. Click on Yes, I want to telephone a customer the service representative to active windows now.
  3. Click read the Windows Product Activation privacy statement, click new, and then click Next.
  4. Follow the steps in the Activate Windows by phone dialog box, and then click Next.
  5. When you are given a number and call don't select any option and wait for a person pick up, then explain what happened.

  The American phone for activation number is 1-888-725-1047

  How to activate XP:
  http://support.Microsoft.com/kb/307890

• When you try to activate Windows I get an error: Code 45123 could not establish a connection with the activation server.

  the error number is 45123 and said "we could not establish a connection with the activation server." Please give me an answer to this error and try to solve it! If you want I can send you my product key to activate it, but I think it's better on email not here because there are a lot of... the pirates who have access to this site! provide me with an email address and I'll send you my product key and try to activate it and then give me the id I need to enter the activation window! Thank you!

  I solved this problem! Thanks for the help!

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• When you try to download Silverlight, I get a message that says that Windows Installer are not available.

  Windows Installer is not correctly installed

  When you try to download Silverlight, I get a message that says that Windows Installer are not available.  Windows install is not properly installed.

  How can I fix it?

  I am running XP Home Edition.

  Thank you

  Hello

  1. you try to directly run the silverlight program without saving it on the computer?

  Run the following article fixit tool and check.

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

• When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Original title: error message

  When you try a yahoo search I get the error message "windows cannot find (web site name) make sure you typed the name correctly.

  Hello

  ·         What web browser do you use?

  ·         Would which site you find?

  ·         The issue is that with Yahoo search?

  ·         Exactly how you try to search? Web site or toolbar in Internet explorer?

  You try to use the Bing search engine to search for Web pages online. To access Bing search engine type www.bing.com in the address bar. Please provide us with more information about the issue to help you further.

• When I try to reinstall Windows XP on my Toshiba laptop, it works until I reboot. Then it says nvrd32.sys not found: press any key to continue.

  original title: NVRD32. SYS ERROR

  When I try to reinstall Windows XP SP3 on my Toshiba laptop, it works until the first reboot. When I boot on CD it comes up saying nvrd32.sys is not found: press any key to continue. When I press a key it is said: the Installer failed. Press a key to restart your computer.

  So, I don't know what to do. I tried searching on google and found a set, but talk of computer that I couldn't begin to understand. Basically, what I consider somewhere or can I fix it myself? I just paid for a new disk of Windows XP SP3, so I'm not looking forward to having to pay someone to use it.

  Hello

  ·         Windows XP came preinstalled on your laptop?

  ·         If so, you have a recovery partition?

  ·         Where did you buy the disc of Windows XP SP3 for?

  nvrd32.sys file is a chipset driver and must be installed via floppy F6 during initial installation.

  Method 1: To do this, follow these steps.

  a. you can download the chipset drivers from Toshiba Web site and copy it to a floppy drive.

  b. press F6 at the start of the installation of Windows XP.

  c. follow the on-screen instructions to install the drivers for the chipset.

  Method 2: You can contact Toshiba to restore to factory on the laptop.

• I upgraded Windows 10, now when I open Photoshop Elements 10, I get a message that I need to Internet Explorer version 5 or later for all the elements to Photoshop to work. When I try to download the latest version of Internet Explorer, I said that I have

  I've updated to Windows 10. Now, when I open Photoshop Elements 10, I get the message that I need Internet Explore version 5 or higher for Photoshop work properly.  When I try to download the latest version of Internet Explorer, I get a message that I already have the latest version. SO, what should I do?

  Settle in the right forum.

• My iMac news, sharing and permissions had a name 'wheel' that I didn't put there. When I try to delete it, I get code error-8076. Any thoughts?

  My iMac news, sharing and permissions has a name 'wheel' that I didn't put there. When I try to delete it, I get code error-8076. Any thoughts?

  It is a part of the OS and nothing to worry about.

  https://en.Wikipedia.org/wiki/wheel _ (Unix_term)

• I get online w / dell.msn, but when I try to open Hotmail I get a msg that Win Explorer stopped

  BUT when I try to open Hotmail, I get a mssg that Win Explorer stopped.    I can still use browser, but it won't let me in my mail.

  Huh?

  PT

  This forum is for Microsoft Security Essentials.

  Please you have to

  http://windowslivehelp.com/

  to further support.

• Installed WriteItNow 3 software and now when I try to uninstall it, I get the error message: error in LaunchAnywhere.

  I installed the software WriteItNow 3 and now when I try to uninstall it, I get the error message: error in LaunchAnywhere. Cannot launch the executable file. Class not found: com, zerog, lax, LAX. How can I fix this so that I can uninstall the software?

  original title: error LaunchAnywhere

  You can give a whirl to this program because it is good enough to get rid of stubborn programs.

  http://www.revouninstaller.com/

  I hope this helps.

• I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop I get an error message telling me to download and install App Office creative cloud so I didn't and it launches the application craps out and gives the sa

  I recently used Migration assistant to transfer to a new macbook pro and when I try to use Photoshop, I get an error message telling me to download and install App Office creative cloud so I do and it begins to it out craps and gives the same message over and over.

  Hi Paul,.

  Migration wizard does not work in the case of Adobe applications.

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

  Kind regards

  Sheena