When I try to reinstall Windows XP on my Toshiba laptop, it works until I reboot. Then it says nvrd32.sys not found: press any key to continue.

Similar Questions

• Had to reformat my hard drive, now when I try to reinstall Windows XP I get a blue screen with this code at the end 0x0000007b.

  has had to reformat my hard drive now when he star0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000)

  has had to reformat my hard drive, now when I try to reinstall windows xp, I get a blue screen with this code at the end 0x0000007b (0x78d663c, 0xc0000034, 0x00000000, 0x00000000) how to solve this problem

  Hello

  I saw the 0x0000007B BSOD caused by trying to install XP on a disk hard while the BIOS is designating the reader as AHCI instead of IDE. XP has no native AHCI drivers, resulting in a stop 7B. Unless the PC had originally Vista or Win 7, but it might be useful to check that it is not likely.

  If the BIOS is set to AHCI, you could do one of three things (depending on whether your PC has a floppy drive)...

  1 find the Setup F6 disk on AHCI support at installation time (start with the manufacturer's website if you do not already have such a thing). Watch the very hit F6 prompt early in the installation process.

  2. change the setting in BIOS on IDE / ATA

  3. create a new "slipstreaming" installation disc drivers AHCI in the existing installation disc, see http://www.nliteos.com/index.html

  After the back if your BIOS is IDE / ATA

  Tricky

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• Business post - when I try to open Acrobat PRO, it asks me to sign in French - I connect then it says that I don't have a subscription.

  Business - account I have license for Acrobat PRO 10 and I have only 1 adobe ID. When I try to open Acrobat PRO, it asks me to sign in French - I connect, then he says that I don't have a subscription. I don't want a creative cloud account - I just Acrobat PRO on all 10 PC users of without access of cloud. How am I supposed to move logging?

  Summary: I bought 10 number of licenses for Acrobat PRO X. It seems to have installed Acrobat DC on each of the 10 PC. When I connect with my name of user and password Volume license when opening DC he says I do not have a subsriptioion. All of the 10 facilities were made redundant during the installation. I can't get past the login of creative cloud. I don't want the users to use the creative cloud. How can I let my users open Acrobat?

  Hi Patrick,

  There seems to be that some are in conflict with the authorization of volume license and a bench only. I ask you to connect with the Adobe support team.

  They would have a look at the details of your account and help you with this problem.

  Check the following link to contact them.

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  Please click the blue button "Still need help" to connect with one of the Adobe executives.

  They would surely help you with this.

  Concerning

  Sukrit diallo

• When I try to reinstall Windows XP I have this message: "the version you are trying to install is older version.

  Cannot install xp

  everytime I try to reinstall windows xp pro, I get "version that you are trying to install is older version.

  E-mail address is removed from the privacy *.

  How to do a clean install of Windows XP

  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm
  also: http://www.bootdisk.com/

  Also, make sure you have the drivers you need for your mother, video card
  card, sound card, etc.
  Try Belarc Advisor: http://www.belarc.com/free_download.html
  He did a good job of providing a wealth of information, including key software codes
  and you will need drivers for devices.

  If you perform a clean installation on an existing PC which has XP already installed:
  Check your code CD Key corresponds to what Belarc Advisor reports to your existing installation.
  Note: Windows OEM installs usually come with a sticker on the PC or laptop and may not match the installed key factory.
   
  Note: A number of vendors now supply restore CD or a restore hard disk partition
  and, usually, do not provide a Windows XP CD.

  J W Stuart: http://www.pagestart.com

• Errors in the world when you try to reinstall Windows XP on a new hard drive.

  Original title: errors everywhere!

  Hi all:

  I recently bought a new hard drive (seagate momentus xt) for my older PC toshiba M70 laptop. I tried to re - install Win XP on the recovery disk (which came with the laptop) but I got a black screen with cursor. I repeated the collection, same thing. To check that all was well with the disc, I scanned and then installed ubuntu 9.04 it work perfect! What is interesting is that in the prior installation, he showed that win xp has been installed on the disk. Then I tried to re - install win xp - then I got this error Grub 17... I went back with the facilities and now I'm at a point where I get a message "error: unknown filesystem grub rescue >" (after the installation of ubuntu 11.04, then windows again). I don't know what to do. What I want is my xp back, I can't get ubuntu. Help, please.
  Thanks in advance.

  Hi ARolle,

  ·         It is reinstall drive?

  Method 1: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Method 2: Try to boot from the CD and see if you can start the installation.

  Contact Toshiba to get more information on the type of disc you use to reinstall Windows.

• DMI. EXE Application error when you try to reinstall Windows Vista

  I have a Toshiba A215 S7422 and I need to re - install Windows Vista.  When I try a complete reinstall, I get the message that there is a DMI. EXE Application and program error Stops the computer.  How can I get Windows Vista re-installed on this machine.

  http://laptopforums.Toshiba.com/T5/General-technology/A205-5814-DMI-exe-exception-error/m-p/23330

  Read the information in their Forums.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Contact Toshiba above the link for any problems with their software/recovery process.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• After removing Mac Bootcamp in Windows 7, when you try to reinstall, "Windows key is already in use.

  I used to run Windows 7 on a Mac with Bootcamp. later, I removed the bootcamp on my mac and reinstalled Windows 7 on a PC. When I try to enter the Windows key, I received a message that the key is already in use! Any suggestions?

  Thank you.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Product key is not valid when you try to reinstall Windows 7

  I bought a hp laptop and it came preloaded with windows 7. I let my uncle use my laptop and tried to install windows 7, even though he was already on my laptop. I have my product key but when I type in it says invalid. Is there anyway I can restore my laptop to default settings, but it doesn't have this option, it says insert disc.

  Original title: problem with Windows 7.

  Recovery of your computer (Windows) using "Recovery Partition" of the Manufacture

  To get there, start your computer and then pressing the appropriate function key. It can be either F1, F2, F9, F10, F11, F12, DEL or tab key. Check the manual for your make and model.

  If your hard drive has failed, you must contact the manufacturer support team and request a "recovery disc" which allows to reinstall Windows 7.

  How access/start the process of recovery of the manufactures listed below.

  Acer: Press and hold ALT + F10, as soon as you see the logo
  Acer support: http://www.acer.com/worldwide/support/

  ASUS: Press or press the F9 key as soon as you see the Asus logo.

  Dell: Press F8 directly after switching on / to start the computer
  Recovering detail instructions:
  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?docid=52182

  EMachines: hold the Alt key and hold press and release the key F10

  Fujitsu: Press F8 several times directly after switching on

  Gateway: https://support.gateway.com/s/software/microsof/vista/7515418/7515418su531.shtml

  HP Notebook: Usually to begin recovery process press the F10 key, power on the computer
  HP Mini: Press F11 directly after switching on / to start the computer

  LG: Press F11 directly after switching on / to start the computer

  How to run Lenovo Onekey Recovery
  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT062552
  Detailed as follows: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=127597018499211

  Packard Bell: Turn on your computer. When Packard Bell logo is displayed, press in and hold the ALT key while pressing the F10 key several times. Release the keys when a message that Windows is loading files.
  After the system recovery program has loaded follow the instructions to reinstall the operating system.

  Samsung: Press the F4 key to the Samsung logo when you turn on first of all of the computer.

  Sony VAIO: Reboot and press "F8" repeatedly until the screen "Advanced Boot Options".

  Toshiba: Press on F12 or the value 0 (zero) key on the top of the keyboard (not the zero on the numeric keypad key)
  and at the same time, press the button power once to turn on your laptop.
  When the Toshiba screen appears; release the 0 key.
  References: http://www.mytoshiba.com.au/support/items/faq/71
  http://forums.Toshiba.com/T5/system-recovery-and-recovery/how-to-perform-system-recovery-Windows-7/Ta-p/279643

  Windows 7 - location of the Partition Recovery and information.
  "Configurations of drive partitions using the BIOS has recommended.
  Note: Check the diagrams of this article
  http://TechNet.Microsoft.com/en-us/library/dd744364%28WS.10%29.aspx

  J W Stuart: http://www.pagestart.com

• I get an error, "this copy of Windows is not genuine" when I try to reinstall Windows 7.

  I tried to reinstall Windows on a machine running Windows 7 Build 7601 made-to-measure and now I get a "this copy of Windows is not genuine error» I was trying to transfer the operating system of a 30 GB SSD to a new 90 GB SSD as the space available on the 30 GB version has been insufficient.

  Windows 7 Home Premium 64 bit.

  I really need to clean all drives and reinstall from scratch on the 90 GB SSD drive, but I'm not able to get order of format etc.

  Thanks for your help.

  Original title: problem with Windows 7 reinstall

  Hi SheldonHarrison,

  Thanks for posting in the Microsoft Community. It seems that you have a problem with the activation of Windows after changing the hard drive. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

  We start with a few questions-

  Did you do any other changes on the computer?

  I would like more information about the issue.

  Method-

  You are facing this problem since you move the Windows to another hard drive.

  You must use the same product key and try activating Windows.

  I would have you refer to the steps suggested by Keith - the wire.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-is-showing-as-not-genuine/cbd43297-0e4d-458C-8487-9168c4cd668d

  We know if you need help. We will be happy to help you.

  Thank you.

• When I try to install Windows XP Professional on my laptop, I get a blue screen that says "error(C=0000135) found dll gdi32not.

  install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

  original title: I install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

  Hi Vytautassvitojus,

  ·         The computer have any OS installed?

  ·         Are you able to boot to the desktop?

  If you are not able to boot to the desktop and then remove the external devices except the keyboard and mouse, perform a chkdsk from the recovery console and then try to install Windows.

  To run chkdsk from the Windows Recovery console. You can check the links for a description of the Windows XP Recovery Console

  http://support.Microsoft.com/kb/314058

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  I hope this helps.

• With Windows 7 or 8 on my 2710p (built in webcam), the camera driver says "HP Webcam not found"

  I had the webcam on my 2710p with Windows 7 running for a while, but after I plugged an external webcam (I think it's marked Microsoft), it's almost as if my built in webcam dissappeared.  I tried to format the computer to Windows 7 and now Windows 8 (the two 32-bit), hoping that a new facility would solve the problem, but when I try and install the driver of webcam sonix from the page of drivers hp for the 2710p (with W7 Home Premium 32 bit drivers), it says "HP Webcam has not found! Please connect the HP webcam and then run Setup again. "The only unknown device in my device manager is the PCI controller, I don't really like.

  What happens here? I'm pretty tech literate, but I'm stumped here.

  Webcams are fragile and I suspect yours is dead. I think that it is a coincidence that it happened while you were using an external webcam.

• 1606 error received when you try to reinstall windows XP

  When I tried a clean install of XP using the WINNT32.exe file, I get, 'Error 1606 could not access network location ". I used the "fixit" proposed thus Microsoft tool to do a repair of my registry. None has solved the problem. I'm not completely computer illiterate, but in any case I am an expert. Can someone please offer some suggestions to correct this error in the language than novice can understand?

  Hello

  try to see here how to do a clean Windows install through boot CD Windows XP XP (method 1):

  http://support.Microsoft.com/kb/978307/en

  LC

• When you try to reinstall Windows XP I get error Stop: 0x0000007E. PCR.sys - base at F7496000, datestamp 3b7d855c F749dobf address

  I first thought that my hard drive went wrong, because it would not allow my to reinstall the Windows XP operating system on the hard drive. I get the blue screen of death. So, I went out and got a new hard drive and tried to install the XP operating system on the new hard drive. I had once more the blue screen of death! So I ask why it does this? I'm stuck!

  Here is the error code information:
  Stop: 0x0000007E (oxc0000005, 0xF749D0BF, 0xF78E9208, 0xF78E8F08)
  PCR.sys - base at F7496000, datestamp 3b7d855c F749dobf address
  Please help me! I have a dell Inspiron 1520, if it's relevant somehow.
  original title: I need help

  OK, then 'search' in the bios.

  make sure that the bios contains specific data on time system, the RAM and the hard drive, IE. :

  Make sure that the date and time is correct.

  Make sure you installed the amount of memory shown in bios the amount real matches.

  Make sure that the new hard drive and its size is denoted accordingly.

  (go to dell.com and look for the model number.  then go over the web pages on it and the faq on the bios and the size of the ram that came standard with the laptop)

• When I try to reinstall Windows I get an error that I need a driver for continue instalation.

  I want new installation vista spk 1 on toshiba satellite A100

  I inserted the cd/dvd to install vista, I am asked to load the driver that is compatible with this material, so I can install OS, I have to manually download drivers.what is the name of this driver and where do you find them, help would be appreciated, thanks

  Hello

  I suggest you to contact the manufacturer of the computer for a recovery disc. The recovery disk contains the drivers for the device appropriate for your computer.