When I try to run the defrag on my lap top using windows vista I can't tell if his work or not, it dose'nt show the report or the results of the defragmentation tool can help you please and thank you, aceer.

Similar Questions

• error "result of concatenating string is too long" when I try to run the following code. Help me!

  When I try to perform the following PROCEDURE, he throws me an error:

  Error from line: 2 in command.

  BEGIN

  FACT_UPDATE;

  END;

  Error report-

  ORA-01489: result of concatenating string is too long

  ORA-06512: at "AFLOBIDW. FACT_UPDATE', line 22

  ORA-06512: at line 2

  01489 00000 - "result of concatenating string is too long."

  * Cause: Result of concatenation of string exceeds the maximum size.

  * Action: Make sure that the result is less than the maximum size.

  ---------------------------------------------------------------------------

  I can't change the logic of the code since I'm trying to do Informatica at the back done and compare performance between Informatica and Oracle DB. Is there another solution for errors? I add only the SQL query that is part of the PROCEDURE for easy viewing. Please help me. Thank you!

  SELECT "UPDATE XXAFL_MON_FACTS_F SET TASK_WID ='"

  || NVL (TO_CHAR (TASK_WID), 'NULL')

  |', EXECUTION_PLAN_WID ='

  || NVL (TO_CHAR (EXECUTION_PLAN_WID), 'NULL')

  || ', DETAILS_WID ='

  || NVL (TO_CHAR (DETAILS_WID), 'NULL')

  |', SOURCE_WID ='

  || NVL (TO_CHAR (SOURCE_WID), 'NULL')

  |', TARGET_WID = '

  || NVL (TO_CHAR (TARGET_WID), 'NULL')

  || ', RUN_STATUS_WID ='

  || NVL (TO_CHAR (RUN_STATUS_WID), 'NULL')

  |', SEQ_NUM ='

  || NVL (TO_CHAR (SEQ_NUM), 'NULL')

  |', NAME = "'

  || NVL (TO_CHAR (NAME), 'NULL')

  || ' ', NO_POSITION = "'

  || NVL (TO_CHAR (INSTANCE_NUM), 'NULL')

  ||'' ', INSTANCE_NAME = "'

  || NVL (TO_CHAR (INSTANCE_NAME), 'NULL')

  || ' ', TYPE_CD = "'

  || NVL (TO_CHAR (TYPE_CD), 'NULL')

  ||'' ', STATUS_CD = "'

  || NVL (TO_CHAR (STATUS_CD), 'NULL')

  ||'' ', START_TS ='

  || DECODE (START_TS, ",' to_date(''e))

  || To_char (START_TS, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  || ', END_TS ='

  || DECODE (END_TS, ",' to_date(''e))

  || To_char (END_TS, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  |', DURATION = '

  || NVL (TO_CHAR (DURATION), 'NULL')

  |', STATUS_DESC = "'

  || NVL (TO_CHAR (STATUS_DESC), 'NULL')

  || ' ', DBCONN_NAME = "'

  || NVL (TO_CHAR (DBCONN_NAME), 'NULL')

  ||'' ', SUCESS_ROWS ='

  || NVL (TO_CHAR (SUCESS_ROWS), 'NULL')

  || ', FAILED_ROWS ='

  || NVL (TO_CHAR (FAILED_ROWS), 'NULL')

  |', ERROR_CODE = '

  || NVL (TO_CHAR (ERROR_CODE), 'NULL')

  |', NUM_RETRIES ='

  || NVL (TO_CHAR (NUM_RETRIES), 'NULL')

  || ', READ_THRUPUT ='

  || NVL (TO_CHAR (READ_THRUPUT), 'NULL')

  |', LAST_UPD = '

  || DECODE (LAST_UPD, ",' to_date(''e))

  || To_char (LAST_UPD, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  |', RUN_STEP_WID = "'

  || NVL (TO_CHAR (RUN_STEP_WID), 'NULL')

  || ' ', W_INSERT_DT = '

  || DECODE (W_INSERT_DT, ",' to_date(''e))

  || To_char (W_INSERT_DT, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  |', W_UPDATE_DT = '

  || DECODE (W_UPDATE_DT, ",' to_date(''e))

  || To_char (W_UPDATE_DT, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  || ', START_DATE_WID ='

  || NVL (TO_CHAR (START_DATE_WID), 'NULL')

  |', END_DATE_WID = '

  || NVL (TO_CHAR (END_DATE_WID), 'NULL')

  |', START_TIME ='

  || NVL (TO_CHAR (START_TIME), 'NULL')

  |', END_TIME ='

  || NVL (TO_CHAR (END_TIME), 'NULL')

  ||' WHERE INTEGRATION_ID = "'

  || INTEGRATION_ID

  ||''';' AS Column

  OF XXAFL_MON_FACTS_F;

  Hello

  ORA-01489 is one of these error messages that really means what he says. The error message you posted pretty much sums up the situation.

  What version of Oracle are you using?  (You must still include this whenever you have a question.  See the FAQ forum: Re: 2. How can I ask a question on the forums? )

  From 12.1 of the Oracle, there is an option to allow VARCHAR2s in SQL to be as big as 32767octets.  (The default is 4000).

  Otherwise, if you can't change the code, either do not run. or ensure that the concerned channels are quite short so the error does not occur.

• I have CS6 Production Premium and speed category, I installed and when I try to run the program I need to sign up for the cloud.  I just want to use my version can help you or seated, me?

  I have CS6 Production Premium and speed category, I installed and when I try to run the program I need to sign up for the cloud.  I just want to use my version can help you or seated, me?

  I have stick thread regarding the CS6 and Cloud Creative Re: What's up with Adobe Application Manager CS6?

  and another, if you are confused enough, perhaps another angle my old CS6 now asking me to connect to the cloud

  and maybe he has your response a bit clearer how we prevent cloud creative resume my perpetual license CS6?

• I had installed the captain claw game and when I try to run the following error report is: of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.

  original title: C:\DOCUME~1\hariraj\LOCALS~1\Temp\7f3f_appcompat.txt

  I had installed the captain claw game and when I try to run the following error report comes... Please solve my problem...

  ....

  ARCADE-ACTION SIDE-SCROLLING GAME

  Of the Side-Scrolling Action-Arcade game has encountered a problem and needs to close.  We are sorry for the inconvenience.

  ERROR SIGNATURE

  AppName: cla.exe AppVer: ModName 1.3.0.60: cla.exe
  ModVer: 1.3.0.60 Offset: 000f3956

  THE FOLLOWING FILES MUST BE INCLUDED IN THE ERROR REPORT

  C:\DOCUME~1\hariraj\LOCALS~1\Temp\b285_appcompat.txt

  Please please please please help me... i will be grateful to you

  Hi Raj Kumar,

  You can follow the steps mentioned in the article below, which deals with a similar question

  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032

  (Article apply to Microsoft games, steps for other games)

• Asian locale?  Installed Acrobat XI for Windows, but when I try to run the program, it happens in some Asian locales - can not read anything!

  Hello

  I am setting up a new laptop and downloaded Acrobat Pro XI for Windows computer.  Download and install seemed to go fine, but when I try to run the program, it is coming in a few other locales (not French_FR).  What should I do to configure the program for the locale in the United States?

  (running Setup 3 times (to fix, modify, uninstall/reinstall), but so far nothing has worked.)  Even after uninstalling/reinstalling (where I deselected the local Korean), the program still continues to flow upwards in an alternate reality!

  Help, please!

  Thank you

  -fastkeysx

  Hi Vicki,

  Have you tried toggling this setting under Edit > Preferences:

  

  Kind regards

  Rave

• When I try to run the update in widows I get the error number: 0x8024400A

  When I try to run the update in widows I get the error number: 0x8024400A. I also tried to restart the automatic update service and BITS service with no luck. Any ideas? I am running Windows XP SP2 on a Dell Latitude. I lost a hard drive and just reinstalled today of a disc from Dell.

  Thank you

  Adam

  http://support.Microsoft.com/kb/836941

  Read the above article, you can use Fixit, but I suggest fix you it yourself by following the steps in the resolution.

• I just installed Lightroom 5.3.  New installation.  When I try to run the program it gives an error

  I just installed Lightroom 5.3.  New installation.  When I try to run the program it gives an error "the application could not start correctly (0xc000007b).  Click OK to close the program. »

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

  Should help!

• When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy. The directory or file cannot be created. »

  original title: could not copy files

  When I try to copy a file to an external device using Windows Explorer I get the following error message: "cannot copy.  The directory or file cannot be created. "I understand that I may have the physical limit of USB keys for the root directory.  How can I fix it?

  Hi GloriaZF,

  What is the size of your external hard drive and what is the available free space? Open my computer-> right click on the external hard drive-> properties. You will not be able to copy more data if the disk is full, or who have less space compared to the size of the file you are trying to copy.

  You need to remove the order data to make the space more. Deleted data from the device USB will be permanently deleted and will not be stored in your Inbox, so take care while eliminating unnecessary data.

  I hope this helps.

• Using windows Vista, I can't read a jpeg photo CD.

  Using windows Vista, I can't read a CD of photos jpeg, on another PC with XP, I can read the CD. Is that what I can do to get Vista to read a jpeg photo CD. The CD was created by Boot.

  Hello
   
  1. what application you use to read jpeg from the CD images?
   
  2 - is the CD is detected in CD-ROM/DVD-ROM?
   
  3 have you tried with another CD? The other CD's get detected?
   
  You can view the articles below and check out them if you're having similar problems.
   
  When you insert a CD or a DVD, Windows Vista may not recognize the disc
   
  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
   
  Please answer these questions to help us better.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Help, please! I get an error message that access is denied 0x80070005 when I try to run the backup facility.

  I use Windows Vista as administrator and use the automatic installation of Windows to save everyday on an external hard drive - this has been fine for months and nothing has changed, but now I get the error message and can save is no longer. I tried to disconnect the external hard drive and reinsert and the drive is recognized. Back up to start running for awhile and then fails. Can anyone help please?

  Hello

  Using third-party backup program or windows backup?

  Method 1
  Step 1: I would suggest that you start the computer in safe mode and then run the backup files.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If you are able to run backup ins fine safe mode, and then perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  Method 3
  Under your administrator account, get full rights and take possession of all the C:\ drive using the following procedures.
  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.

• location is not available when I try to open the administration tool...

  "C:\ProgramData\Microsoft\Start Menu\Programs\Administrative of Directors made reference to a location that is not available" Please help me I cannot open the administration tool I use windows vista ultimate 32 bit...

  Hi dudex3eme,

  (a) what were the changes to the system between the time where everything has worked, and when you noticed the problem?

  (b) do you use the computer as an administrator?

  Step 1: Power the computer as an administrator and check if the problem persists

  Step 2: You can check with another user account, if you do not have a different user account, you will need to create a (see link below)

  Create-a-user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Let us know if this works very well as expected

  If the problem persists,

  Step 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to run the MATS I get a message that the dll is missing

  Original title: you try to run Automated Troubleshooting

  When I try to run MATS, I get a message that the dll is missing.  How can I fix this?

  Hi bjacobs,

  1. what Microsoft Fixit you try to run?

  2. when the problem started?

  For more specialized issues of Fixit assistance, please post your request on the Microsoft Fix it Center

  Microsoft Fix it Center

  http://social.Microsoft.com/forums/en-us/fixitcenter/threads

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• So I installed rollercoaster tycoon 3. When I try to run the game I get a box with the header "" Microsoft Visuall C ++ Runtime library ""Runtime Error! " Program: End of the 3\rct3.exe__abnormal program C:\Program Tycoon3 tycoon

  can you tell me what causes exactly this and any idea on what I can do about it?
  the box indicates that the requirement for video is ATI Radeon 32 MB GeForce 2 or higher. I have the GeForce 8400 Gs

  Hi Merlot_1984

  Welcome to Microsoft Vista answers Forum!

  I suggest that you try to run the game as administrator and verify.

  Right-click on the game, and then click Run as administrator.

  If the problem persists, I suggest that you perform the clean boot, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart.

  Let me know if it worked.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to run the program already installed files (including volume control), the system always ask what program I want to use to run it.

  I recently installed a new antivirus protection software, now at any time, I try to run a program he's asking me what program I want to use to run it, even for already installed programs. For IE, firefox, etc, it's simple, but when I try to adjust the volume of the system through Control Panel he asks me what program I want to use it to run only and I can not. Any ideas how to solve this problem?

  Look at the article on execution of .exe files.

  Article number: 950505 - when you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

  You can make the default program using set Associations.
  1. open default programs by clicking the Start button, click default programs.
  2. click on associate a type of file or Protocol with a program.
  3. click on the file type or protocol that you want the program to act as the default value. (In this case it will be for .exe files).
  4. click on the change agenda.
  5. click on the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs.
  6. (if you don't see other programs or your program is not listed, click Browse to find the program you want to use, and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)
  7. click on OK.

  You can also look at the information here: restore the .exe Windows Vista file association, after badly with another application
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  Thank you

  Marilyn

• Access violation when I try to run the RT code

  I get this when I try to run my RT VI. Made in 2011. Upgrade to 2012.F3.

  

  This problem is solved. My project has been corrupted somehow, so I created a new one with the RT model. He is not yet 100%, but at least it crashes no more.