When I try to use the system restore I get is an empty box where the restore points should be restore which stops me using the restore of the system how can I get the restoration back bridges

I tried to use my system restore, but when I go into it all dates are missing from the box and I can't use the system I tried many different things, but nothing is done, everyone has ideas

If your system restore page display only the title bar 'System Restore', or your accounts settings page of users shows that the 'User accounts' title bar and the screen where information needs to be is an empty white box...

System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

Remember that the system restore is not a time machine.

Your system is currently or has been reached by malicious software.

You can now fix the symptom and scanning for malware later, or you can now find malware and fix the remains later.  I recommend just fixing the symptom of the empty page and forget to do the scans.  The symptom of the problem of fixing and fixing the problem are two different things.

Download, install, update and do a full scan with these free malware detection programs:

Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

They can be uninstalled later if you wish.

The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

Just fix the immediate question:

Looks like your file jscript.dll became somehow not registered so you can re-record it.

There are probably a few other things that do not work you know yet, so fix them all at once.

Re-registration of these DLLs is correct, even if they do not need renewal.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

regsvr32 jscript.dll
regsvr32 vbscript .dll
regsvr32 /i mshtml.dll (it's a look of slash)

The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

Now check your timetable for restoration of the system and/or the user account settings page.

Tags: Windows

Similar Questions

  • Error: cannot read the registry path common runtime. This happens when I try to use "Topaz" or NIK filters. How to fix?

    When I go to use filters "Topaz" or NIK I get this message. It started today. Can someone give me help?

    @

    Hi Alschuler,

    Have tried to uninstall and re - install plug-ins or try and delete the files in the files to %temp%.

    https://www.topazlabs.com/downloads

    Collection of Google Nik

    It will be useful,

    ~ Mohit

  • When I try to open files saved in my documents, microsoft word opens a page that looks like a kind of code. and does not open my saved work. How can I fix

    I open my documents. I find the file I'm looking for. I click on it to open it and it will automatically open in Microsoft word. with coded letters page which makes no sense.  most of these files is open in Picture Manager, but now all the... some will be open at all... How can this be repaired?

    Hello

    1. what version of Windows is installed on the computer?

    2. What is the format (file extension) of the document you want to open?

    3 are you aware of any changes made to the computer, before the show?

    I suggest to change the default program associated with a file type and look for the question.

    Change the programs that Windows uses by default

    http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

    I hope this helps.

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

  • When I try to use the system restore I get an unspecified error response

    Original title: 'all programs, accessories, SYSTEM RESTORATION tools'

    Recently, when I try to use system restore, I get an unspecified error response he has worked in the past. How can I fix it?

    Problems with system restore:

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

    2. try SR in safe mode:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    3 Malware will stop at the system restore:

    If necessary, do all the workSafe Mode with network.

     

    To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

    http://www.Malwarebytes.org/MBAM.php

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    Download, install, upgrade and scan once a fortnight.

    See you soon.

    Mick Murphy - Microsoft partner

  • Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

    Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
    Got the unable to create the specified task

    Hello

    What is the exact error message received when the problem occurs?

    Methood 1:

    Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833 

    Method 2:

    You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

    Method 3:

    You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

    http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

    Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I hope this helps! Let us know if you need more assistance.

  • I deleted a program by mistake and now when I try to do a system restore, I get a message that it was defective and that you cannot restore.

    I deleted a program by mistake and now when I try to do a system restore, I get a message that it was defective and that you cannot restore.

    I tried at least three different times to restore and the same message to arrive when it's over.
    It all started yesterday when I started the computer and it says windows cannot open and it says that he who sets.
    It won't let me even reinstal the program I deleted it goes on to say that missing microsoft. NET 4, but it is already on the computer
    and there the critical updates installed for microsoft. NET.  Help please

    Hello

    If you have problems with the system restore, this can help you:

    1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    2. try to use Safe Mode system restore.

    http://bertk.MVPs.org/html/restoresysv.html

    3 Malware will stop at the system restore.

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

    http://www.Malwarebytes.org/products/malwarebytes_free

    And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  • When you try to run the system on gateway mx6453 recovery, recovery begins a box opens indicating the system restore is incomplete, please insert the cd or dvd

    try to run the system on gateway mx6453 recovery, opens the recovery page, but then appears a box that says system restore is incomplete, please insert the cd or dvd.  the recovery partition seems to agree.

    Hello

    · Why are you running the system recovery?

    · Are you able to perform system restore on the computer?

    I suggest contacting the manufacturer of the computer, the link you can check: http://support.gateway.com/support/default.aspx?cmpid=topnav_support

    For reference: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

  • When I try to do a system restore the computer tells me that I have errors on my local C drive

    Original title: problem windows 7

    When I try to do a system restore, the computer tells me I have my local C drive windows errors tells me it will check the disc if I do a restart, but when that happens it is cannot do anything it drives me crazy what can I do

    was soon Micky

    Your first question should be is my hard drive works fine.

    To do this, you must download and run the software from the manufacturer of your hard drive.  Answer back with the model number of your hard drive and we will provide a link for download.

    1. Beginning
    2. type device manager in the text box
    3. Click on Device Manager
    4. Click on hard drives
    5. you will see the model number.

    If she passes the test, then you can proceed to run chkdsk.

    1. Beginning
    2. All programs
    3. Accessories
    4. Right-click on command prompt and choose Run as administrator
    5. In the black box type chkdsk c:/r
    6. Then accept her offer to run at next boot Y
    7. Restart your computer
    8. It will take 1-3 hours depending on the size of your disk.  Don't stop, once it starts.
  • Receive the OXC0000022 error when you try to run the system restore

    Original title: OXC0000022 ERROR

    My problem started when I went to the site of JIGZONE Jigsaw, the picture window that shows the parts was not correct!  I thought I might have a virus so I ran avast, SuperAntiSpyware, and has not helped.  So I did the scan SCF/scannow and it did not show anything wrong.  Then I tried to do a system restore to an earlier date, that's when I got the error message and it has not restored, I changed to another date and no luck.   I went safe mode and tried to do the restore, no luck!  Help, please!

    My calculation uses Windows 7 Home Premium,

    Thank you!

    Carrman Daddy 2

    Hi Carrman,

    Sorry to hear that uninstall tool did not help uninstall you spybot and thank you for your update.

    It seems that when we try to uninstall the software, the software looks file uninstall.exe which might have been moved or deleted.

    I suggest you post this question on the forum of Spybot.

    http://forums.Spybot.info/forum.php?s=62ab5cf724e2426acbd901d146640e2c

    For your information: http://www.safer-networking.org/FAQ/How-to-uninstall-2/

    I hope this helps to solve the problem, email us for assistance.

  • I get the error message "there was an error of analysis of the data on your system" when you try to use Windows Easy Transfer

    Original title: there was an error of analysis of the data on your system

    I get this error when trying to use Windows Easy Transfer to prepare to move from an XP PC to a Windows 7 PC. It passes through the part of the selection on where I later import files then says he is scanning the disc and fails with the above error.

    In the search for this error, I found information of 2007 could be be a nero problem AVI.  I don't have Nero installed and I can't find the log files in the directory MIGWIZ.

    It is a small (50 GB) HD who do not have much space available on it (I'm not in front of it now).  Is there a minimum amount of free space needed to run this executable? That is why it is a failure?

    Could there be other issues behind this failure?
    Thanks in advance

    Hello

    Follow these methods and check if that helps.

    Method 1:

    I suggest to download from the link provided below windows easy transfer tool and install it and then try to transfer the data back.

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

    Method 2:

    Refer to step 2 and step 4 from the link provided below:

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

     

     

    Method 3:

    I recommend you to try different types of transfers using different media. You can also do a disk clean up of the Windows XP computer. Remove unwanted programs from the Windows XP computer. Do a disk clean, right click on the C drive, and then click Properties. Clean, then click on the disc.

    For use with different media windows easy transfer, you can click on this link for steps to follow:

     

    http://Windows.Microsoft.com/en-us/Windows7/transfer-files-and-settings-from-another-computer

     

    http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  • When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. "__What I can do to fix this? __Thanks

    When I try to use the Snipping Tool I get a message saying that "the capture tool doesn't on your computer right now. Restart your computer and try again. If the problem persists, contact your system administer. »
    What can I do to fix this?
    Thank you

    Hi Palaimo,

    See if one of the patches in the following link works for you.

    Snipping Tool fails

    Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

  • When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

    When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

    I'm not that computer literate and do not understand what needs to be fixed.

    This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

    I use ESET Antivirus Node32 software.

    Hello

    1. What is the error message or an exact error code?

    2 have you made changes on the computer before this problem?

    3. you try to check the updates?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Reset Windows Update components and then try to download the updates.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

     

    Method 2:

    File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

    http://support.Microsoft.com/kb/310747

    Please respond with more information so that we could help you more.

  • When I try to use the send to compressed (zipped) folder option I get an access denied message

    When I try to use the send to compressed (zipped) folder option when I right click on a file I get the following message

    Unable to complete the operation.

    Access is denied.

    However I do have permisions complete on the file and I am the only user and administrator

    Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

    If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

    If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

    If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

    Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

    Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  This can sometimes solve the problem on its own.

    While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

    If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

    I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • When I try to run the program already installed files (including volume control), the system always ask what program I want to use to run it.

    I recently installed a new antivirus protection software, now at any time, I try to run a program he's asking me what program I want to use to run it, even for already installed programs. For IE, firefox, etc, it's simple, but when I try to adjust the volume of the system through Control Panel he asks me what program I want to use it to run only and I can not. Any ideas how to solve this problem?

    Look at the article on execution of .exe files.

    Article number: 950505 - when you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
    http://support.Microsoft.com/kb/950505

    You can make the default program using set Associations.
    1. open default programs by clicking the Start button, click default programs.
    2. click on associate a type of file or Protocol with a program.
    3. click on the file type or protocol that you want the program to act as the default value. (In this case it will be for .exe files).
    4. click on the change agenda.
    5. click on the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs.
    6. (if you don't see other programs or your program is not listed, click Browse to find the program you want to use, and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)
    7. click on OK.

    You can also look at the information here: restore the .exe Windows Vista file association, after badly with another application
    http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

    Thank you

    Marilyn

  • When I try to use msconfig, I get an error message that reads; SYSTEM CONFIGURATION XRX55 100 24956__

    When you try to use the system setup, I get the following error message.
    An access denied error was returned while attempting to change a service.  You may need to log on using an asministrator account to make specific changes.  I am logged in as administrator on the computer.  I used to be able to make these changes up until October or November 2009.  I think that something could change when the automatic updates have been downloaded.

    Hello

    Welcome to Microsoft Windows 7 answers Forum!

    Could you please answer these money questions?

    (a) do you have the latest changes on your computer?

    (b) error only occurs with the system configuration utility?

    Method 1:

    This issue may also occur if your computer security program blocking the system configuration utility, so disable the security program and check the issue.

    Method 2:

    If the steps provided above don't resolve the issue, and then create a new user profile.

    You must create a new user account and check the question of do you need to follow the steps below.

    Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

    Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Click on create a new account.

    Type the name you want to assign to the user account, click an account type, and then click on create an account.

    Now search for the question.

    If the problem is resolved, then you can follow the link below to the difficulty of the corrupted user profile.

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    For reference:

    http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/b07c4b83-d0b6-4207-a7aa-6209dd0f9a88

    Thank you, and in what concerns:

    Suresh Kumar-Microsoft Support.

    Visit our Microsoft answers feedback Forumand let us know what you think.

Maybe you are looking for

  • problem with DNS on the active directory server unique

    I have a client that I'm having a problem with DNS that they do not have active directory structure.  I tried just about everything and at my wits end.  Customers can get online, but the problem is that they cannot see the DNS.  Any help would be muc

  • Driver Bluetooth for hp envy 17-j100 ee win 7 32-bit or 64-bit

    Dear Sir I'm looking for EA for hp envy 17-j100 bluetooth driver for win 7 32-bit or 64-bit, I don't find it on the site of hp adapter? can you please guide me where to download Here is the site of product drivers http://h10025.www1.HP.com/ewfrf/wc/s

  • Pavilion G7: Network driver needed

    Hi, I have HP PAVILION G7 os is windows 7 (64-bit) I can't find the driver for ethernet and network controller This message is in network controller propertertis that the drivers for this device are not installed. PCI\VEN_1814 & DEV_5390 & SUBSYS_163

  • Impossible to update KB97930 & KB2621440 get error code 80070020 & 8024200 D

    I couldn't update KB97930 & KB2621440 get error 80070020 & 8024200 D I codes followed the steps of your web site. I also tried to make a clean start. Please notify. Thank you

  • Windows Vista Edition upgrade Home Premium Windows Vista Business

    Hello I recently bought a HP Pavilion dv6 1199EE laptop and it has a version of Windows Vista Home Premium Service Pack 2 system Type 32 bit installed. Now, I want this transition to Windows Vista Business full Edition without formatting & reinstall