When I turn on my computer, already set up profiles disappear and are replaced by 'Kiosk' and 'other users' options that require passwords. I can get into 'other users' and find my previous user accounts, but lose them again after the reboot.

Similar Questions

• the zoom browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)

  # zoom the browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)

  I haven't seen good eye.

  Install the extension to Default FullZoom Level and set a default zoom level:
  
  https://addons.Mozilla.org/en-us/Firefox/addon/6965

• With some sites (not all) that require passwords, how can I get Firefox to resume registration of passwords when the site is not in the list of exceptions?

  For some banking sites that require passwords, I'm 99.3% sure that I have at one point, never said 'Remember password'. Now, I want to change my mind. When I go to Options/Options/Security/Remember.../Exceptions, the sites are not listed, but I'm not always asked the question "want to remember...". »

  The Web site may use autocomplete = off to prevent Firefox to record the name and the password.

  You can remove autocomplete = off with a bookmarklet to register the name and the password of Firefox.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered
  • Saved password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

• "asked several times, but not familiar with this forum but hear goes again, after the recent upgrade of LR CC my copy does not load it comes up with the message" cannot find namespace: "AgCoretech", all know I want t aprt of having a difficulty which is i

  Well, it seems that there are so many problems with the Adobe software, you would almost think that they are that the property/developed by Microsoft

  As suggested reinstall LR, which should take care of it.

  ~ Rohit

• Installation of Windows 7 starts again after the reboot

  I have a Dell 420 Computer and try to install it on Windows 7 Home Premium.  Installation disk asks me the usual questions and then crosses the installation process.  When it's done, it restarts my computer, but instead to put Windows 7, it starts the installation process more.  I need help.

  I have a Dell 420 Computer and try to install it on Windows 7 Home Premium.  Installation disk asks me the usual questions and then crosses the installation process.  When it's done, it restarts my computer, but instead to put Windows 7, it starts the installation process more.  I need help.

  When it restarts and says press any key to boot from the disc - do not press any key, just let it continue. If you press a key, the process will start.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• What can I do for my job to second hand Apple iPad fact model A1459 again after the effort to achieve the legitimate owner is prove abortive and I love the iPad useful to me

  I need help because my second hand Apple iPad be activated without the apple owner ID

  Anyone on these boards can only activate the iPad for you, and nobody at Apple will be. Locking activation is a measure of protection against theft.

  (136982)

• I am making a new user account, but when I try to call my computer says that he cannot have another name with characters inside

  Original title: new user account...

  I am making a new user account, but when I try to call it my computer says it cannot have another name with characters inside (>)

  Hello

  I suggest you try to create the new user account using the command:

  'control userpasswords2' run box or the start search box and then create the new user account.

  Follow the steps for the same thing:

  a. click Start, type control userpassword2 in the search box and press enter.

  Hope the information is useful.

• When I turn on my computer, I get a blank black screen and must disable it again.

  When I turn on my computer, I get a blank black screen. Then, I turned off the computer and turned it back and a message says turn on in safe mode, safe mode with networking, or safe mode with command prompt.  I turned on in safe mode with network, then I got a message saying check your network settings or material in your control panel, but I don't know what to check. Then I did a system restore to an earlier date. Everything was well computer works well again. Then when I turned on my computer this morning the same thing again. I did the same restore to an earlier date and then was able to use my computer. Someone at - it ideas why this happened? the computer worked fine until two days ago. I use windows xp home addition.

  Hi jantravis,

  ·         There were no significant changes made on the computer before the show?

  ·         Have you installed new software, hardware or Windows updates?

  ·         You get any message on the computer when the problem occurs?

  ·         What is the exact message that you receive in safe mode?

  Check to see if this article helps you.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• How can I OMIT the PASSWORD to START when I turn on my computer first? (I already deleted the Windows password)

  When I turn on my computer, a small box appears which says "STARTING password".  This was initially set up when I did accidentally one a fraudulent service called 'Mypcsave.com '.  The password is currently the guy who worked on my computer.  Once you enter his name, the screen, and then past to Microsoft screen where you can click on your user/guest to open a session.  All of this show has been removed to the best of my knowledge, but I would OMIT this step of signing with the STARTUP PASSWORD.  Any suggestions would be greatly appreciated! Thank you! Lora

  When I turn on my computer, a small box appears which says "STARTING password".  This was initially set up when I did accidentally one a fraudulent service called 'Mypcsave.com '.  The password is currently the guy who worked on my computer.  Once you enter his name, the screen, and then past to Microsoft screen where you can click on your user/guest to open a session.  All of this show has been removed to the best of my knowledge, but I would OMIT this step of signing with the STARTUP PASSWORD.  Any suggestions would be greatly appreciated! Thank you! Lora

  Ok!!!  I thought about it!
  Type in "syskey" & click on enter, then you will see a box that says SAM Lock Tool, click YES
  You will then see a box that says "Database WIndows Acount"... click on "UPDATE".
  Then click on "System generated password" If you DO NOT require a startup password.
  Then select "record the startup key locally.
  Click on 'OK' click on 'OK' and you're done!
  No startup password is required!

  Whewwww... I was faced with this for 2 months!  lol :)

• My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever.

  My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever. Any ideas what's happening?

  Make sure you change the image is not checked...

  

  

• When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated.

  Windows XP Activation loop.

  When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated. All I can do is, click 'OK' and he takes me into a log on screen with my name on it and goes through the same process, as described at the beginning of this statement. I'm in a loop. The only way out is to wipe my hard drive and reload windows new who, within 30 days, it will do no doubt once again. How to do this?
  For 3 years I rebooted my computer. That's why I reloaded it in the first place. I sent this version of Windows XP by Microsoft and have recharged the system at least 4 times in the past 10 or 11 years.

  Ken

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer:

  http://support.Microsoft.com/kb/312295

  Hope this information is useful.

• I have a user account, but the type is standard user... I can't create an administrator user... because when I press on it see something that says that WINDOWS needs YOUR permission TO CONTINUE to create... Fix this please...

  I have a user account, but the type is standard user... I can't create an administrator user... because when I press on it see something that says that WINDOWS needs YOUR permission TO CONTINUE to create... Fix this please...

  To create an administrator account, you must be...
  (1.) an administrator
  (2.) to connect to the existing administrator account, or in possession of an administrator password.
  If you do not have all of the above, forget it.

  When the system asked you for permission, you should click on continue or enter the Admin password. If you could not do either, it means that you don't have administrative rights to do what you want.

  t-4-2

• I get 2 back to back error messages when I turn on my computer?

  I get 2 back to back error messages when I turn on my computer, they are:

  (1) "Windows cannot find ' * 2 boxes * [I don't see what it is and only 2 boxes are visible]. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click on search"; Clicking OK comes the following error message
  (2) could load not run ' * 2 boxes * [I don't see what it is and only 2 boxes are visible] ' specified in the registry. Make sure that the file exists on your computer, or remove the reference to the file in the registry. "

  Browse for it on the internet I came across a software called HAKO Removal Tool. This website says that my computer has been infected by a Trojan of HAKO and that would fix it. I downloaded, scanned the computer with her and she found a problem with the 2 files.
  "Process.exe" and "HotKeysCmds".  BUT this is a paid software and I have to pay 50USD to use. Is there anything else possible?
  Although Kaspersky' 10 and Super AntiSpywayre don't seem to find anything wrong.

  Symptoms:
  Computer is very slow. especially the navigation on the internet. Whereas it is fine if I use a laptop with Wifi..?

  What is the problem?

  I get 2 back to back error messages when I turn on my computer, they are:

  (1) "Windows cannot find ' * 2 boxes * [I don't see what it is and only 2 boxes are visible]. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click on search"; Clicking OK comes the following error message
  (2) could load not run ' * 2 boxes * [I don't see what it is and only 2 boxes are visible] ' specified in the registry. Make sure that the file exists on your computer, or remove the reference to the file in the registry. "

  Browse for it on the internet I came across a software called HAKO Removal Tool. This website says that my computer has been infected by a Trojan of HAKO and that would fix it. I downloaded, scanned the computer with her and she found a problem with the 2 files.
  "Process.exe" and "HotKeysCmds".  BUT this is a paid software and I have to pay 50USD to use. Is there anything else possible?
  Although Kaspersky' 10 and Super AntiSpywayre don't seem to find anything wrong.

  Symptoms:
  Computer is very slow. especially the navigation on the internet. Whereas it is fine if I use a laptop with Wifi..?

  What is the problem?

  If your computer has not already been infected by virus or malware, it is probably now after you have downloaded and installed something of a site that wants to pay you $50 to remove something you didn't know you had until told this same site.

  Do you mean that you have installed Kaspersky Anti-Virus 2010?  Your subscription is up to date?

  Similarly, you would update SUPERAntiSpyware before running a scan of your computer?

  I'm not sure what you mean by '2 boxes.'  Do you mean that instead of characters for a file name, you see two empty squares?  In any case, download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx install it and let it scan.

  When Autoruns analysis is complete, click the 'connection '.  Review them entered what whether that looks like "bad."  I can't be more specific, because you could not see that the name of which has been commissioning.  By looking at the name of the entry, its description and its publisher, you should be able to easily identify most of the entries in the logon section.  If you can't, either post the details of back here or do a Google search.

  For any entry that does not appear to be legitimate, uncheck the box to the left of the entrance.  Close the Autoruns and restart the computer.  Messages should no longer appear.  Once you are convinced that you have disabled the correct entries, you can go back and use Autoruns to delete (instead of just deactivating).

  I also suggest you analyzing your system with other tools.
  Download, install, update and run MalwareBytes Anti-Malware.
  Go to http://www.eset.com/us/online-scanner and let it scan your computer.

• I have a problem when I turn on my computer...

  I have a problem when I turn on my computer. An error that says: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "
  And there are 3 options: start windows in safe mode, safe mode with network or start Windows normally. And... If I have the choice between these options my Windows shows this option again and again after loading... How to solve "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. " Problem ?

  lakimedo,
  The first thing, have you changed any hardware or software?   If you added new hardware then delete and restart.  Also disconnect external devices and try to start.  When you start start pressing F8 until you get the Windows startup options.  Then try "Last known good configuration" see if that helps.  If those who do not help, I would start with your XP CD to recovery mode and run "chkdsk/r" then "sfc/scannow".  QQ learn manage!

• How can I stop iphoto loading when I turn on my computer?

  How can I stop iphoto from loading all my photos when I turn on my computer? Please help as he now takes years before the web page downloads I mean I know my computer is old but it usually works very well. I am connected via BT infinity.

  Looks like you have set iPhoto to start when connecting. If you don't want this, Ctrl-click the icon in your dock iPhoto, choose them 'Options' from the context menu. One of these options is 'open the connection '.

  

  If it is enabled, this is why iPhoto load. Simply select the menu uncheck the option and you should be set.