When installing Oracle BI 12 c on AIX is xmalloc of error: could not allocate 2112164888 bytes (0 bytes allocated)

Dear all

I was asked to install Oracle BI server on an AIX 6.1 Server 12 c old we have.

I have JAVA SDK 7 which is supposed to be certified with both weblogic and BI 12 c

I have installed weblogic with no problems, but when you call BI installation I get this error

xmalloc: could not allocate 2112164888 bytes (0 bytes allocated)

I tried to adjust/etc/security/limits

$ ulimit - a

Time (seconds) unlimited

leader (Blocks) unlimited

Data (KBytes) unlimited

Stack (KBytes) 196608

Memory (KBytes) unlimited

coredump (Blocks) unlimited

nofiles (descriptors) 65536

threads (per process) unlimited

process (per user) unlimited

I don't know if this is related but I thought that it might help, but it didn't

I have enough memory on the server, so what else could be wrong?

Thank you all

He is certified according to

http://www.Oracle.com/technetwork/middleware/Fusion-Middleware/documentation/FMW-1212certmatrix-1970069.xls

in any case, I found the solution, I don't even believe that such a thing has stopped me for a long time

I only had to run the command from the same directory where the bin file!
I used to run it like this

. // bi_platform - 12.2.1.0.0_aix_ppc64.bin

I should go the location first, then executez./bi_platform-12.2.1.0.0_aix_ppc64.bin

Thanks to you all

Tags: Business Intelligence

Similar Questions

  • When you try to perform a factory restore I get this error: "could not find"JScript.Encode"script engine: C:\Windows\Help\OEM\scripts\launche.jse.

    I'm trying to restore my PC to the preassembled initial state

    I followed this as mentioned in the help, but I got this message
    Cannot find "JScript.Encode" script engine

    C:\Windows\Help\OEM\scripts \launche. JSE

    I use windows Vista

    So what can I do to restore my system?
    waiting for your support with kindness

    Hello

    There are two ways to do this.

    Most computers these days don't come with recovery discs.

    Instead, computer image makers a recovery Partition on the hard drive in order to reinstall the operating system to.

    That the recovery process says return to factory (new State) settings

    To access the recovery partition, you should be able to find it in the start menu > programs > list of software from the manufacturer of your > search for recovery options.

    A simpler method to start the press a key or sequence of keys at startup (when you start your computer)

    So maybe F10, F11, Alt + F10, etc. depending on your manufacturer.

    You must ask them or online on their website or the Support Forums to know the exact key / s press.

    Another method is to ask them to send you a set of recovery discs, which will do the same.

    They will charge a small cost for this service.

    Back up the data that it will be lost during the recovery process, and all programs that you have installed will need to be reinstalled from the original media (CD, DVD, download Net).

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    See you soon.

  • Don't take any Message When installing Oracle 11 g 1 material with dbca on Solaris10

    Hi people Oracle,.

    Please can someone help me;

    When installing Oracle 11 GR 1 material with dbca on Solaris10 als I get to the last step with the creation of database after clicking on finish OK for HTLM model it takes too much time.
    And nothing out like the other error more than an hour. It's just waiting without installation procedure. Nothing
    I tried uninstall-install-uninstall-install but nothing. I google but nothing.
    Reason why I'm asking you please your advice, or a good link where to look.


    I thank in advance
    Sincerely
    Easyman

    It was just a workaround solution, since I plugged directly in the external display. Try this with X fonts.

  • Firefox 8 ads make look it good with all the possibilities, but when installed it's like the old Firefox and the news is simply not there.

    Firefox 8 ads make it look good with all the possibilities. But when installed it's like the old Firefox and the news is simply not there. Why bother to install the most recent?

    Right-click the menu bar and uncheck the option menu bar.

  • When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

    When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

    This has happened

    Each time Firefox opened

    I tried to download firefox.

    User Agent

    Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

    When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

    When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

    If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

    A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

  • When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor th detect the problem. "However, when we click on"Get Adobe Support Advisor.

    When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor detect the problem. "However, when we click on"Get Adobe Support Advisor. It is not to us to show how to solve the problem.

    Hello

    Please see failed to initialize the installation program

    "Installer initialization failed." I have tried everything what it but no dice.

    setup initialization failed

    I hope this helps!

  • I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can I have cs4 for r

    I recently installed camera raw plugin (9_1_1_7) for sony camera rx 111. When I try to open photoshop CS4, I get the following message, "could not complete your request because photoshop does not recognize this file type" How can get cs4 to read the raw file?

    Hi diggoman,

    Greetings.

    • Camera raw 9.1 is not compatible with 4 CS of PS.
    • This camera is too recent for your PS CS 4

    Your options if you want to open raw files-

    • Purchase PS CS 6
    • Or go to subscription with PS CC 2015, where you will also have access to the PS CS 6

    Concerning

    Rohit

  • Error: Could not find or load class main oracle.apps.ad.tools.configuration.JaznCredentialManager over the automatic configuration

    Hi all

    We're performing an upgrade to 11i, R12, and the same durinf find the error during the configuration of the applications below.

    AutoConfig Services Phase

    Running process of Service 6 of 8 for AD_TOP

    The execution of script in InstantiateFile:

    /oracle_uat/XX/R12/apps/tech_st/10.1.3/Perl/bin/perl-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/perl/lib/5.8.3-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /oracle_uat/xx/R12/apps/apps_st/appl/au/12.0.0/perl-je /oracle_uat/xx/R12/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /oracle_uat/xx/R12/inst/apps/xx_xx/admin/install/txkExecSetJaznCredentials.pl

    script gave:

    ****************************************************

    ERRORCODE = 1 ERRORCODE_END

    .end std out.

    Error: Could not find or load the class main oracle.apps.ad.tools.configuration.JaznCredentialManager

    .end err out.

    ****************************************************

    Found the fix when $CLASSPATH has been disabled, but the strength to help here.

    You guys could give me an overview on likely areas that I could check.

    Thank you

    Hello

    Have you checked that the file JaznCredentialManager.class is well under

    Directory JAVA_TOP/oracle/apps/ad/tools/configuration of $?

    This class file is delivered by 12.1.3 (fix 9239090), R12. ATG_PF. B.Delta.3 (patch 8919491)

    and R12. T2K. B.Delta.3 (patch 8919489).

    Kind regards

    Phil.

  • ORA-04030: memory of process when trying to allocate 28872 bytes (Alloc mountain environment, Failover SCH)

    Hi all

    I'm using Oracle 11 g R2 (11.2.0.3.0) on AIX 6.1

    A third-party application is faced with the ORA-error below:

    ORA-21503: program completed by fatal error

    ORA-04030: memory of process when trying to allocate 28872 bytes (Alloc mountain environment, Failover SCH)


    I use memory_target (AMM automatic memory management) on my database, I assigned 18 GB for my memory_target.

    I am facing this problem on a program that runs every day, but I am facing this problem only on the data for a specific day.

    Could you please help me solve this problem?

    Kind regards

    Keep in mind that we can only respond to data entry and our own experience.

    Since you say that doesn't happen at a given date, it might well be a programming error, the design did not account the amount of data.

    We have no idea about the third-party application or process running.

    But, Yes, however, you must contact application and check or have checked the usual trace file destinations oracle give you whenever something is not completely false in unexpected ways.

    You'll have to debug or buy more memory

  • When you try to print the document his service hence giving error does not

    I am using windows xp pro sp2

    When you try to print the document his service hence giving error does not

    then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

    Please help me

    Hi kalpesh_vaghela,

    1. Did you the latest changes on the computer?
    2. What is the full error message that you receive?
    3. What is the number and model of the printer?
    4. You use any program to print the document?
    5. Are you experiencing a similar problem with any program that allows you to print?
    6. You have security software installed on the computer?

    Method 1

    See the link below and try the fixit tool available, check if it helps.

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

     

    Method 2

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

    When you are prompted, click restart to restart the computer.

  • First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

    Hi all

    I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

    When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

    After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

    The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

    Technical specifications

    First Pro CC 2015.4 (latest version)

    OS: Windows 10 Pro (Version 1511)

    CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

    RAM: 16 GB

    GPU: EVGA GTX 1070 (latest drivers)

    SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

    Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

    Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

    Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

    Type: MPEG Movie (.mp4)

    Image size: 3840 x 2160

    Frame rate: 29.97

    Format of the pixels: 1.0

    It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

    Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

    Any help?

    It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

    For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

    The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

  • Detcts iPod but ITunes "cannot correctly identify" uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify correctly.

    ITunes detects the iPod, but 'cannot correctly identify' uninstalled iTunes and then re-installed. Restarted laptop. Folder deleted Apple Lockdown, rebooted, still could not "identify" during each step, also disconnected iPod USB port.

    Try the following (in that order).  Looks like you're using Windows (not a Mac), so I'll make this assumption...

    Shut down (power off) the computer, disconnect all the USB devices.  Plug the laptop power adapter, so that it does not work on battery power.  Do this Reset (reboot), the iPod

    Learn how to reset your iPod - Apple Support

    Start computer, run iTunes and connect the iPod to a USB direct on the laptop by itself.  If there is no difference, put the iPod in Disk Mode

    Put the iPod in disk - Apple Support Mode

    Then connect to the laptop again, always by himself.  If iTunes picks it up, he may ask you to do a restore with a message on the "recovery."  If you're OK with deletion of the iPod, do the restore.  See if the iPod is "correctly identified" after restoration.

    If the problem persists, you said you uninstalled and reinstalled iTunes, but may not have uninstalled iTunes and associated software components.  Follow the steps in this document to uninstall an iTunes installation components, in the order described all listed

    Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

    Then, reinstall the latest version of iTunes

    http://www.Apple.com/iTunes/

  • Error, "could not stop main service of McAfee Amti-malware on the Local computer. Error 5: access is denied. "when trying to stop the McShield service.

    Original title: mcshield is a nightmare for me.

    McShield is a nightmare for me.  Its location is c:\program files\common files\mcafee\ACore\mcshield.

    When I try to stop it in services.msc I get the error "could not stop McAfee Amti-Malware Core service on Local computer.  Error 5: access is denied. »

    I have administrative rights at sign on. How to stop this monster?

    http://www.pchell.com/virus/uninstallmcafee.shtml

    read this through

    If it was me I would uninstall McAfee, it is not highly recommended by someone I know.

    Once it is removed, try a free antivirus, I use MSE, but you have to read the instructions first!

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

    Download MSE

    http://experts.Windows.com/w/experts_wiki/89.aspx

    MSE installation checklist

    If you choose to use Mcafee, download autoruns, which shows which takes over at the start and you can disable here.

    AUTORUNS

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    Above is autoruns to loadup questions

    If you still can't find the entry in the registry, download Autoruns.  Let it finish the scanning, then click the Services tab.  Find the name of the service 'wrong' in the left column ("Autorun entry").  Right click and select ' go to '.  You will go straight to the appropriate entry in the registry for editing.

    I would like to examine what you load at startup. You should see if you have any programs from loading during the startup process, which can be changed on request.
    With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
    Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

    When you use Autoruns, you will need to click on the "Connection" tab to see what runs at startup.

  • BPOS error "could not establish a secure connection t server. Please check if you have installed the required certificates.

    Hello

    We use the Microsoft Online Service in our office.

    The user is confronted with the question by connecting to the Microsoft Online Service, it gives the error could not establish a secure connection t server.  Please check if you have installed the required certificates.

    The one you suggest to fix the problem

    Thank you

    Hello
     
    Note that your computer is under domain, you must contact the technet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

    http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices

  • When I try to click on anything on my office say "Publisher could not be verified are you sure you want to run this software?"

    original title: don't know

    When I try to click on anything on my office say "Publisher could not be verified are you sure you want to run this software?" The icons for all my programs are now icons of internet explore instead of original icons there. ?

    When I click on something like windows media player, it appears on my screen do you want to run or save this file? I then click on run and then it happens the Publisher could not be verified are you sure you want to run this software? ... Please help!

    How long is what happens?

    Can you remember a time when you did not have this problem?
    If so, can you do a system restore and use this date as your restore point?

    How to restore the system:
    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

Maybe you are looking for

  • No Push for Facebook Messenger notificatifications

    Hello I can't type notifications push on iOS devices for the purposes of Facebook Messaging. Don't know what the problem is. notifications are enabled in the application as well as in the settings > > notifications What Hat I'm missing?

  • icloud in car - sharing a folder with a friend

    Hello I want to share folders with friends in icloud drive like this: I want to create folders for each of my friends one. How can I share these files with my friends, so that they can see when I put something in their files? Thank you for having res

  • Safely remove the device with VISTA is not infallible

    I have a HP Pavilion Slimline nine running Vista. I plug a USB key or an external hard drive and it reads very well. I have try the safely eject button, and the light on my memory stick stays on. With XP, it came out, and I knew that I could remove t

  • Question of Skype on 5.1.1

    Without headphones, Skype calls work fine. However, with the headphones, the other person can't hear me. I tried the Echo test, which has not as well. But the echo test works without headphones. I can even record audio with headphones, but it does no

  • Restart the laptop everytime I close.

    Hello people... I have the problem that whenever I close my T60 still running, I have to restart again. Does anyone knows how to fix this?