When my page is reduced to half of my screen, horizontal scrolling does not work.

Similar Questions

• I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work.

  I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?

  When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall.   Panel\Windows Firewall control page should have shown a message say.  If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.

  I really think you should try a restore for some time point before you tried modifications, if that is even possible.

  If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.

  If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting.  Your system is in an unknown state as a result of these changes.

  You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.

  You may need to use the installation DVD to do a repair installation.  I hope get you lucky, but you may need to do a complete reinstall of Windows.

• When I try to buy a book, it seems it download but does not work. If I am able to get a sample and try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  When I try to buy a book, it seems it download but does not work. If I am able to get a sample & try to buy the sample goes far & no new book. There are funds in my account iTunes Help!

  Mine just did the same thing. I've even went and was sold again in case I did something wrong the first time. Still no book! I had to happen a few weeks ago, but when I closed iBooks and reopened, the book was there. This time that didn't happen.  I prefer to read on the iBook, but I'm not if my books download

• When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  When I drag the current time indicatorin the timeline the video preview does not work. How can I fix it?

  

  Which turns off.

• I have connected, but when I need to update apps, again request the password, but it does not work?

  I have connected, but when I need to update apps, again request the password, but it does not work?

  Birgitte salvation,

  Have you tried to enter your system password.

  Please let know if it still does not.

  Concerning

  Megha Rawat

• Search page based on query with Table on Layershift ADF Panel does not work correctly

  Hello

  I'm on 11.1.2.4 jdev and deployed my application on glassfish 3.1.2. I've hosted this application on Layershift externally.

  I created a search page based on query ADF with table Panel. All fields of research are working fine on weblogic Server integrated and my deployment local glassfish.

  However, on Layershift, when I enter some criteria of research in certain fields, it does not record.

  UPDATE, it seems that the problem is with the fields which are of the "String" ie. Name. Fields of data type Integer and Date seems fine.

  any ideas please?

  Thank you

  kdario, you're right, ViewCriteria does not use the correct syntax for mysql for the concatenation.

  The generated sql statement looks like this.

  SELECT * FROM (select student_id, student_name, from  student) QRSLT WHERE ( ( (UPPER(student_name) LIKE UPPER('%' || 'Per' || '%') ) ) )
  

  as DB MySql does not support | (double pipe sign), its sql causing failure.

  in order to support |, mysql requires to change the sql mode setting in the file my.cnf (on linux) in the

  # Set the SQL mode to strict
  sql-mode="PIPES_AS_CONCAT,STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
  

  After setting this parameter, its working fine now.

• My saved favorites does not appear on the html bar when I typed the first letter! He appeared and now it does not work! How and what do I do?

  Help! My saved favorites does not appear when I type in the first letter. For an example, I saved "www.facebook.com" as one of my favorites. Whenever I go into facebook, I'll just enter the letter 'f' and he goes, a drop down link in the html bar then I'm leaving for facebook! But recently there have not been showing bookmarks I saved. I reinstalled firefox and it does not solve the problem at all. How and what do I do?

  Make sure that the address bar is not set to 'Nothing': Tools > Options > privacy > address bar: when you use the location bar, suggest: history, bookmarks and bookmarks - see Smart Location Bar

• Does anyone know how to close "SafariCloudHisto" when installing CS6 on a Mac? The normal option forces quit does not work...

  I try to install CS6 on a Mac with OS of Yosemite. It is said that I must close the following applications to continue and lists "SafariCloudHisto" as the application. When I go to the Apple menu to force justice, it does not appear. I don't know how to resolve this...

  Please visit:Activity Monitor: exit a process

  I hope this helps.

  Concerning

  Megha Rawat

• Original half-life and add the games does not work on windows 7 64-bit

  I recently installed some of my old games on my new computer which has windows 7 Home premium.
  I tried to run these games in compatibility mode with xp and even try 2000 and 98, but when the games begin first they ask me cd key, which I give, then hang completely.
  My features are way on what to and I can't find any answer on the internet. Help, please!

  Hi Quick_flight,

  ·         Did you install the game in trouble-free compatibility mode?

  I suggest that you try to install the game by keeping the computer in the boot and check if you are able to use the game without any problems.

  You can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  1. click on Start, type msconfig in the Start Search box and press ENTER.
  User account control permission: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. on the general tab, click selective Startup.
  3. under selective Startup, click on to clear the load Startup items check box.
  4 click the Services tab , select the hide all the Microsoft Services checkbox and then click disable all.
  5. click on OK.
  6. When you are prompted, click restart.
    
  Now, install the game in Windows XP compatibility mode and check.

  Reset the computer to start as usual

  .  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  .  Click Start, type msconfig. exe in the Search box of Start and then press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  .  On the general tab, click the Normal Startup option, and then click OK.
  .  When you are prompted to restart the computer, click restart.

  Read the article for more information: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135.

  If the problem persists, I would recommend that you contact the game manufacturer for more help on the issue, also check if patches are available.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Distribute horizontal centers does not work when pixels of the layer at the start on the left.

  Here's the thing.

  1. When my pixels of the layer are on the left, and my bottom layer pixels are on the right, (A).
  2. .. and I select all layers and click the distribute Horizontal Centers (B)
  3. .. layers is properly distributed.  Between the top and bottom layers seem to be distributed in reverse order (C)!
  4. However, when my pixels of the layer are on the right, and at the bottom who are left (D).
  5. .. I select all layers and click the button... (E),

  6. the pixels of the layer are distributed properly. Is this a bug or I do something wrong? Can I return my canvas before clicking on the button as a solution, but it's kind of a pain in the behind.  With gratitude any ideas appreciated.  I use Photoshop CC 2015.1.2, 20160113.r.355x64, Windows 10.

  Add to anti-banner

  It works OK for me.  CC 2015 Windows 7.  Looks like a preference reset may fix it for you.

• Here's a strange. I have a HTML page with this time a wmv video. It works perfectly from a USB stick or SD card, but does not work when they are copied to the hard drive

  I have an HTML page created with web expression 4. It contains only a wmv video. It works perfectly when it is called from a USB stick or SD card, but does not work when they are copied to the hard drive. The results are the same with IE and Firefox. It don't make no difference if I use Media Player V9 or V11. He has no control on the page Media Player. Video and html files are in the same directory. Here is the code snippet:

  LIFT, DRAG, THRUST and GRAVITY

  
  

  
  
  

  If I run it on a machine with Win 7 there is no problem.

  Richard Grosser

  Hi Richard c. Grosser,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Expression forums.

  http://social.expression.Microsoft.com/forums/en-us/categories

• Event does not work when I have my variable of variable mutual FUND!

  Hello

  I programmed a labview vi to add a field to a list view when a Boolean variable value is changed. I used a case Event (value change event) structure to determine if a variable value is changed, it works when I force the Boolean control with my mouse click, but it does not work when the value of the variable is modified by the mutual FUND. What should I use instead?

  Value change events are based on the interaction of the user (or the same ejection programmatically based on the value property node (signaling).)  It is not based on a control change via a regular, variable property node local, terminal or any other connecito0n programmatic or binding.

  You must simply query the variable and determine when it changes.  In this case, you can then use the node value property (signs) in the case of event fire.

• I am now on iOS 9.2 Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the settings, it freezes and then crashes. Please Apple can solve this problem of Game Center iOS 9.2.

  I am on iOS 9.2 and Game Center still does not work. When I open the app it freezes on a blank page. When I open the Game Center in the Middle it hangs just. For this reason, I can't back up my data on my games. Please Apple can solve this problem of iOS 9.2.

  Hello Vaishnav,

  Thank you for using communities of Apple Support.

  I see that you are having problems with Game Center on your iPhone. I have a number of things for you to try.

  First force quit Game Center.

  1. Press the Home button twice quickly. You will see small glimpses of your applications recently used.
  2. Swipe to the left to find the Game Center app to close.
  3. Swipe up on the preview of the Game Center to close.

  Force an app to close the iOS

  If this does not work, then the next step would be a restoration. I recommend restore like new, without backup restore and everything first. If it works there, you can restore the backup.

  Use iTunes to restore your iPhone, iPad or iPod to factory settings

  Best regards.

• When I hit send file, send it to this page or send link does not work

  When I hit the file send send this page or send the link does not work

  * original title - my file, send a page or the link does not work *.

  Hello

  Welcome to the Microsoft Answers Forum!

  Please provide us with more information.

  ·         What on the computer email client do you use?

  Windows 7 is not no matter what installed integrated e-mail client that is required to send links. You may need to either install Windows Live Mail or Outlook.

  You can visit the below mentioned link to download windows live mail.

  http://download.live.com/wlmail

  If you want to install Outlook and then you will need to post your question in the newsgroup to the Office to get the best resolution. Please see the link below:

  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  I hope this information helps. Please get back to us if you have any other questions on this subject.

  Thanks and greetings

• When I open a web page that has a PDF file a pop up appears saying that Internet Explorer does not work.

  When I open a web page that has a PDF file a pop up appears saying: internet Explorer does not work. I use to open the web page before and was able to look at the PDF file. What can I do to solve this problem.

  original title: PDF files

  Go to http://www.adobe.com and download the Acrobat reader software.  If you still have problems, you can use the Firefox browser which you can download from http://mozilla.org .

  Good luck.