When my \\serveur\partage\direct window is not centered

Similar Questions

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• I have a windows computer 7 and when I boot it says windows could not start then he normally open windows or repair.

  * Original title: windows startup

  Hi I have a windows computer 7 and when I start it up it says windows could not start then it says windows normally or repair I choose windows star normally and his coming as a code error 0x0000005c and I did they opsen others, but still the same error code I just wanted if I can back up my photos because they are good, or I can try to solve this

  Thank you

  The BIOS back to their default level settings.

  • Make sure that all internal cables, cards, and other components are installed and correctly.
  • Start your PC with essential hardware only.

  If no change:

  Perform Diagnostics on the memory and hard drive tests.

• Error message when opening the parts attached Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Original title: fault of the Explorer

  How can I solve this problem.

  Sometimes when you try to open an attachment, I see this message:

  Windows could not perform this operation because the explore default e-mail client has not been installed correctly.

  Thanks for your HELP!

  Hi Robert,.

  Thank you for your response.

  Please let us know if you need help with Windows, we will be happy to help you!

• Windows live photo library when trying to print say windows does not

  I try to print in windows live photo gallery it will state windows does not

  Hello DorianSkinner,

  There is a forum for Windows Live products. Please ask your question on the following link for Windows Live Photo Gallery.

  http://windowslivehelp.com/product.aspx?ProductID=20

  Thank you

  Marilyn

• Now when I create a bookmark window is not open and ask me where I want to drop the bookmark. Why?

  When I try to bookmark a website the window which allows to open and ask me where I wanted to drop the bookmark no longer opens. It is now just the bookmark under General bookmarks. How to add to a specific folder of bookmarks?

  You have the extension installed McAfee Site Advisor?
  
  If so, disable it. A recent update to this extension is breaking this part of Firefox bookmarks.

  If this is not the case, this extension, you have this problem when running in Firefox SafeMode?
  
  http://support.Mozilla.com/en-us/KB/safe+mode
  
  Do not choose anything at the moment, just use 'continue in safe mode.

  If this is not the case, see this:
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+theme...

• MAX indicates PXI card when it is started in Windows but not in hypervisor mode

  Hello again all you lovers forum useful!

  I'm having some difficulty with a hypervisor type system see two maps of programmable resistance of 6 channels of Pickering which are loaded in the PXI chassis.  When I boot in Windows mode, MAX sees them very well under My system.  When I then run the hypervisor configuration software, I see both listed and get them assigned to the operating system in real time.  However, when I then starts in hypervisor mode, MAX did not see their money remote systems-> hypervisor target--> chassis (or elsewhere) and the report of pilots do not see all the modules either when I debug my code running on the system in real time.

  Someone has an idea what setting or configuration I may be incorrect?  Is there any other information I can provide that would be relevant or useful to respond to this question?  I'm not the main material guy, he just got married and therefore is not available, so I'm out of my comfort zone.  ;-)  I write software that runs on the system, however, so I'm not completely clueless.  I know we just replaced the controller in the main chassis by a faster (unfortunately, I don't have the number on the spot, the Simulator is down in the laboratory), but I also know that we use the same controller and map of Pickering on a different Simulator and it works fine.

  Any ideas?  I really appreciated your time!

  -Joe

  Too bad, the answer proved to be that I don't have the drivers completely installed on the system in real time.  Apparently, which caused it not to recognize the cards.  I never did understand / remember exactly how to install the drivers of Pickering on the side in real time, but fortunately I was able to simply copy all files that had 'Pickering' in their name in the folder C:\ni-rt\system of the file directory in real time from another Simulator for this one.  ;-)

  See you soon!

• error when you try to update: "windows has not can find new updates, error code A 8024, 000.

  Original title : I can't update my computer... can anyone help me?

  I use Windows vista ultimate and I get the same message when trying to update-"Windows not can find new updates, error code 8024A 000 can someone help me?"

  See this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7

• Firefox process starts but window does not open.

  All the all of a sudden when I launch Firefox 11 window does not appear, but the process will start in the Task Manager. Yesterday everything worked fine, but when I came home in the evening Microsoft Security Essentials was not from, it is protection. I got it working by installing it again. Just Firefox does not open the window for me.

  -J' uninstalled Firefox and restarted the system
  -Ran CCleaner and Spybot S & D
  -Manually reset the registry values with regedit.
  -J' deleted all AppData and plugin files.

  To verify that your system is clean, perform the following steps (no official Mozilla tips, just good practices of personal experience)

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.Malwarebytes.org/

  Download and launch TDSSKiller http://support.kaspersky.com/faq/?qid=208283363

  Check all Windows updates.

  After doing this, restart your Pc and this time, when you try to start Firefox, hold down the SHIFT key while it starts. This forces Firefox in safe mode. Let's see if that helps.

• Windows does not start after XP SP2 update

  automatic update using service pack 2 installed. restart windows when you are prompted. Windows will not start now.

  Hello

  ·        What happens when you try to boot to the desktop, you get an error message? If Yes, what is the exact error that you are experiencing?

  ·        You are able to boot into safe mode without any problem?

  Method 1:

  If you are able to boot into safe mode then, I suggest to do a system restore from there on the desktop normally boot and check.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode and do a system restore from safe mode.

  To do a restore system from safe mode, I suggest you follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  If you are not able to boot in safe mode then, I suggest you follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not start. A recent hardware or software change might be the cause. (vista)

  I've updated pctools free and there was a mistake by because it came when the computer restarts,

  Windows could not start. A recent Ministry of hardware or software may be the cause. To solve the problem.

  1. Insert the windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer".

  File: \windows\system\drivers\PCTCore.sys

  status: 0xc0000098

  Info: windows could not load a critical system driver is missing or corrupt.

  I tried I went to my computers startup options advanced and tried to run in safe mode, but the same previous screen came. Each option in my boot options is the same screen. I realize that to solve this problem, I might have to reload my OS together.  I tried to put what I believe to be the installation disc in and restart but it starts and says the same message. I don't know how to start from the DVD.

  Someone at - it solutions?

  Change the boot order in the BIOS to boot from the CD drive first.
  How to change the boot sequence in the BIOS
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  C:\windows\system32\drivers\pctcore.sys file information
  http://www.file.NET/process/PCTCore.sys.html

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• When you use Word or Windows Mail my cursor to type goes in all directions without warning.

  When you use Word or Windows Mail my cursor to type goes in all directions without warning? What is the problem?

  Hi, the Dalesman,

  Using a laptop?  Make sure that your hand is not sweeping the touchpad while typing.

  HP Support document

  Troubleshooting of mouse - mouse cleaning details

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3432827&prodTypeId=12454&ObjectID=c00006616

  Good luck!

• When I tried to upgrade windows 10, it showed that my windows are not activated.

  * Original title: upgrade windows 10

  When I tried to upgrade windows 10. It showed that my windows are not activated.

  Please help me with this.

  I want to upgrade to Windows 10.

  I suggest that you run the Microsoft Genuine Advantage diagnostic tool in normal mode (not safe mode) and copy and paste the results into a response for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool and when it ends, click the copy button, open a text such as Word or Notepad file and select Edit, paste. You can paste directly into an answer here. Open a response, right click and select Paste.

• SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

  I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

  I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

  I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

  I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

  SP1 Windows 7 Professional 64 bit

  12 GB OF RAM

  2-Intel Xeon E5640 (16 sons) processors

  NVIDIA GeForce GTX580 1536 MB memory graphics

  PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

  Problem solved!

  My Antivirus software was in the way. Once I have updated, things work fine.

  Thanks for your help!